165 lines
9.5 KiB
Plaintext
165 lines
9.5 KiB
Plaintext
/**
|
|
@page IAP/IAP_Main STM32F1xx In-Application Programming using the USART Readme file
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2016 STMicroelectronics *******************
|
|
* @file IAP/IAP_Main/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of implementation of the (in-application programming
|
|
* using the USART (IAP)) on STM32F1xx devices.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Example Description
|
|
|
|
This directory contains a set of sources files and pre-configured projects that
|
|
describes how to build an application to be loaded into Flash memory using
|
|
In-Application Programming (IAP, through USART).
|
|
|
|
@par Directory contents
|
|
|
|
- "IAP/IAP_Main/Inc": contains the IAP firmware header files
|
|
- IAP/IAP_Main/Inc/main.h The main include file of the project.
|
|
- IAP/IAP_Main/Inc/common.h This file provides all the headers of the common functions.
|
|
- IAP/IAP_Main/Inc/flash_if.h This file provides all the firmware
|
|
function headers of the flash_if.c file.
|
|
- IAP/IAP_Main/Inc/menu.h This file provides all the firmware
|
|
function headers of the menu.c file.
|
|
- IAP/IAP_Main/Inc/ymodem.h This file provides all the firmware
|
|
function headers of the ymodem.c file.
|
|
- IAP/IAP_Main/Inc/stm32f1xx_hal_conf.h Library Configuration file
|
|
- IAP/IAP_Main/Inc/stm32f1xx_it.h Header for stm32f1xx_it.c
|
|
|
|
- "IAP/IAP_Main/MDK-ARM": contains pre-configured project for MDK-ARM toolchain
|
|
|
|
- "IAP/IAP_Main/EWARM": contains pre-configured project for EWARM toolchain
|
|
|
|
- "IAP/IAP_Main/SW4STM32": contains pre-configured project for SW4STM32 toolchain
|
|
|
|
- "IAP/IAP_Main/Src": contains the IAP firmware source files
|
|
- IAP/IAP_Main/Src/main.c Main program
|
|
- IAP/IAP_Main/Src/stm32f1xx_it.c Interrupt handlers
|
|
- IAP/IAP_Main/Src/stm32f1xx_hal_msp.c Microcontroller specific packages
|
|
initialization file.
|
|
- IAP/IAP_Main/Src/flash_if.c The file contains write, erase and disable
|
|
write protection of the internal Flash
|
|
memory.
|
|
- IAP/IAP_Main/Src/menu.c This file contains the menu to select
|
|
downloading a new binary file, uploading
|
|
internal Flash memory, executing the binary
|
|
and disabling the write protection of
|
|
write-protected pages
|
|
- IAP/IAP_Main/Src/common.c This file provides functions related to
|
|
read/write from/to USART peripheral
|
|
- IAP/IAP_Main/Src/ymodem.c This file provides all the firmware functions
|
|
related to the ymodem protocol.
|
|
- IAP/IAP_Main/Src/system_stm32f1xx.c STM32F1xx system source file
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs on STM32F1xx Devices.
|
|
- This example has been tested with STMicroelectronics STM3210C-EVAL RevC evaluation board
|
|
and can be easily tailored to any other supported device and development board.
|
|
|
|
Table 1. IAP implementation on STM3210C-EVAL RevC
|
|
/*** Platform ***|************* Implementation **************************|***** Configuration *****\
|
|
****************************************************************************************************
|
|
| Firmware | The IAP program is located at 0x08000000. The Flash | |
|
|
| | routines (program/erase) are executed from the Flash | |
|
|
| | memory. | |
|
|
| | The maximum size of this program (wo optimization) | |
|
|
| | is about 13 Kbytes and | |
|
|
| | programmed on: | Page 0 - Page 7 |
|
|
| | ------------------------------------------------------|-------------------------|
|
|
| | The user application (image to be downloaded with the | |
|
|
| | IAP) will be programmed starting from address | |
|
|
| | (uint32_t)0x08004000(1). | (Page 8 - Page 127) |
|
|
| | The maximum size of the image to be loaded is: | (240 Kbytes |
|
|
| | ------------------------------------------------------|-------------------------|
|
|
| | The image is uploaded with the IAP from the STM32F1xx | 12 Kbytes |
|
|
| | internal Flash. | (Page 8 - Page 13) |
|
|
| | The size of the image to be uploaded is: | |
|
|
|----------------|-------------------------------------------------------|-------------------------|
|
|
| Hardware | Push-button (active level: high) | Key push-button |
|
|
| | | connected to pin PB.09 |
|
|
| | ------------------------------------------------------|-------------------------|
|
|
| | USART used | USART2 (CN6) |
|
|
\**************************************************************************************************/
|
|
(1) User application location address is defined in the flash_if.h file as:
|
|
#define APPLICATION_ADDRESS ((uint32_t)0x08004000)
|
|
To modify it, change the default value to the desired one. Note that the application must be linked
|
|
relatively to the new address too.
|
|
|
|
Following picture illustrates the situation in program memory:
|
|
Figure 1. Flash memory usage
|
|
|
|
Top Flash Memory address /-------------------------------------------\ 0x0803FFFF
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| Page 8 - Page 127 |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| User code |
|
|
| |
|
|
|- - - - - - - - - - - - - - - - - - - - - -|
|
|
| Vector table |
|
|
|-------------------------------------------| 0x08004000
|
|
| IAP code |
|
|
|- - - - - - - - - - - - - - - - - - - - - -|
|
|
| Vector table |
|
|
\-------------------------------------------/ 0x08000000
|
|
|
|
- STM3210C-EVAL RevC Set-up
|
|
- Connect a null-modem female/female RS232 cable between the boards DB9 connector
|
|
and PC serial port.
|
|
(make sure that jumper JP16 is in position 2-3).
|
|
- Hold the Key push-button during reset to enter the IAP.
|
|
|
|
- Terminal configuration:
|
|
- Word Length = 8 Bits
|
|
- One Stop Bit
|
|
- No parity
|
|
- BaudRate = 115200 baud
|
|
- flow control: None
|
|
- Ymodem protocol is using CRC16 by default. To switch to checksum, comment #define CRC16_F
|
|
in ymodem.c
|
|
|
|
@par How to use it?
|
|
|
|
In order to make the program work, you must do the following:
|
|
|
|
1. Generate a binary image for the program provided in the
|
|
"IAP/IAP_Main/IAP_Binary_Template" project directory.
|
|
2. Program the internal Flash with the IAP (see below)
|
|
3. Open HyperTerminal window using the settings already defined in section
|
|
"Hardware and Software environment"
|
|
4. To run the IAP driver, keep the Key push-button pressed at Reset.
|
|
The IAP main menu is then displayed on the HyperTerminal window.
|
|
5. To download an application, press 1 and use the Ymodem protocol
|
|
|
|
Then
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the example
|
|
|
|
|
|
*/
|