292 lines
		
	
	
		
			11 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			292 lines
		
	
	
		
			11 KiB
		
	
	
	
		
			C
		
	
	
	
| /**
 | |
|   ******************************************************************************
 | |
|   * @file    stmpe811.h
 | |
|   * @author  MCD Application Team
 | |
|   * @version V2.0.0
 | |
|   * @date    15-December-2014
 | |
|   * @brief   This file contains all the functions prototypes for the
 | |
|   *          stmpe811.c IO expander driver.
 | |
|   ******************************************************************************
 | |
|   * @attention
 | |
|   *
 | |
|   * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
 | |
|   *
 | |
|   * Redistribution and use in source and binary forms, with or without modification,
 | |
|   * are permitted provided that the following conditions are met:
 | |
|   *   1. Redistributions of source code must retain the above copyright notice,
 | |
|   *      this list of conditions and the following disclaimer.
 | |
|   *   2. Redistributions in binary form must reproduce the above copyright notice,
 | |
|   *      this list of conditions and the following disclaimer in the documentation
 | |
|   *      and/or other materials provided with the distribution.
 | |
|   *   3. Neither the name of STMicroelectronics nor the names of its contributors
 | |
|   *      may be used to endorse or promote products derived from this software
 | |
|   *      without specific prior written permission.
 | |
|   *
 | |
|   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 | |
|   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 | |
|   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 | |
|   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 | |
|   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 | |
|   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 | |
|   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 | |
|   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 | |
|   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 | |
|   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 | |
|   *
 | |
|   ******************************************************************************
 | |
|   */ 
 | |
| 
 | |
| /* Define to prevent recursive inclusion -------------------------------------*/
 | |
| #ifndef __STMPE811_H
 | |
| #define __STMPE811_H
 | |
| 
 | |
| #ifdef __cplusplus
 | |
|  extern "C" {
 | |
| #endif   
 | |
|    
 | |
| /* Includes ------------------------------------------------------------------*/
 | |
| #include "../Common/ts.h"
 | |
| #include "../Common/io.h"
 | |
| 
 | |
| /** @addtogroup BSP
 | |
|   * @{
 | |
|   */ 
 | |
| 
 | |
| /** @addtogroup Components
 | |
|   * @{
 | |
|   */
 | |
|     
 | |
| /** @defgroup STMPE811
 | |
|   * @{
 | |
|   */    
 | |
| 
 | |
| /** @defgroup STMPE811_Exported_Types
 | |
|   * @{
 | |
|   */ 
 | |
| /**
 | |
|   * @}
 | |
|   */ 
 | |
|    
 | |
| /** @defgroup STMPE811_Exported_Constants
 | |
|   * @{
 | |
|   */ 
 | |
| 
 | |
| /* Chip IDs */   
 | |
| #define STMPE811_ID                     0x0811
 | |
|     
 | |
| /* Identification registers & System Control */ 
 | |
| #define STMPE811_REG_CHP_ID_LSB         0x00
 | |
| #define STMPE811_REG_CHP_ID_MSB         0x01
 | |
| #define STMPE811_REG_ID_VER             0x02
 | |
| 
 | |
| /* Global interrupt Enable bit */ 
 | |
| #define STMPE811_GIT_EN                 0x01   
 | |
| 
 | |
| /* IO expander functionalities */        
 | |
| #define STMPE811_ADC_FCT                0x01
 | |
| #define STMPE811_TS_FCT                 0x02
 | |
| #define STMPE811_IO_FCT                 0x04
 | |
| #define STMPE811_TEMPSENS_FCT           0x08
 | |
| 
 | |
| /* Global Interrupts definitions */ 
 | |
| #define STMPE811_GIT_IO                 0x80  /* IO interrupt                   */
 | |
| #define STMPE811_GIT_ADC                0x40  /* ADC interrupt                  */
 | |
| #define STMPE811_GIT_TEMP               0x20  /* Not implemented                */
 | |
| #define STMPE811_GIT_FE                 0x10  /* FIFO empty interrupt           */
 | |
| #define STMPE811_GIT_FF                 0x08  /* FIFO full interrupt            */
 | |
| #define STMPE811_GIT_FOV                0x04  /* FIFO overflowed interrupt      */
 | |
| #define STMPE811_GIT_FTH                0x02  /* FIFO above threshold interrupt */
 | |
| #define STMPE811_GIT_TOUCH              0x01  /* Touch is detected interrupt    */      
 | |
| #define STMPE811_ALL_GIT                0x1F  /* All global interrupts          */
 | |
| #define STMPE811_TS_IT                  (STMPE811_GIT_TOUCH | STMPE811_GIT_FTH |  STMPE811_GIT_FOV | STMPE811_GIT_FF | STMPE811_GIT_FE) /* Touch screen interrupts */
 | |
|     
 | |
| /* General Control Registers */ 
 | |
| #define STMPE811_REG_SYS_CTRL1          0x03
 | |
| #define STMPE811_REG_SYS_CTRL2          0x04
 | |
| #define STMPE811_REG_SPI_CFG            0x08 
 | |
| 
 | |
| /* Interrupt system Registers */ 
 | |
| #define STMPE811_REG_INT_CTRL           0x09
 | |
| #define STMPE811_REG_INT_EN             0x0A
 | |
| #define STMPE811_REG_INT_STA            0x0B
 | |
| #define STMPE811_REG_IO_INT_EN          0x0C
 | |
| #define STMPE811_REG_IO_INT_STA         0x0D
 | |
| 
 | |
| /* IO Registers */ 
 | |
| #define STMPE811_REG_IO_SET_PIN         0x10
 | |
| #define STMPE811_REG_IO_CLR_PIN         0x11
 | |
| #define STMPE811_REG_IO_MP_STA          0x12
 | |
| #define STMPE811_REG_IO_DIR             0x13
 | |
| #define STMPE811_REG_IO_ED              0x14
 | |
| #define STMPE811_REG_IO_RE              0x15
 | |
| #define STMPE811_REG_IO_FE              0x16
 | |
| #define STMPE811_REG_IO_AF              0x17
 | |
| 
 | |
| /* ADC Registers */ 
 | |
| #define STMPE811_REG_ADC_INT_EN         0x0E
 | |
| #define STMPE811_REG_ADC_INT_STA        0x0F
 | |
| #define STMPE811_REG_ADC_CTRL1          0x20
 | |
| #define STMPE811_REG_ADC_CTRL2          0x21
 | |
| #define STMPE811_REG_ADC_CAPT           0x22
 | |
| #define STMPE811_REG_ADC_DATA_CH0       0x30 
 | |
| #define STMPE811_REG_ADC_DATA_CH1       0x32 
 | |
| #define STMPE811_REG_ADC_DATA_CH2       0x34 
 | |
| #define STMPE811_REG_ADC_DATA_CH3       0x36 
 | |
| #define STMPE811_REG_ADC_DATA_CH4       0x38 
 | |
| #define STMPE811_REG_ADC_DATA_CH5       0x3A 
 | |
| #define STMPE811_REG_ADC_DATA_CH6       0x3B 
 | |
| #define STMPE811_REG_ADC_DATA_CH7       0x3C 
 | |
| 
 | |
| /* Touch Screen Registers */ 
 | |
| #define STMPE811_REG_TSC_CTRL           0x40
 | |
| #define STMPE811_REG_TSC_CFG            0x41
 | |
| #define STMPE811_REG_WDM_TR_X           0x42 
 | |
| #define STMPE811_REG_WDM_TR_Y           0x44
 | |
| #define STMPE811_REG_WDM_BL_X           0x46
 | |
| #define STMPE811_REG_WDM_BL_Y           0x48
 | |
| #define STMPE811_REG_FIFO_TH            0x4A
 | |
| #define STMPE811_REG_FIFO_STA           0x4B
 | |
| #define STMPE811_REG_FIFO_SIZE          0x4C
 | |
| #define STMPE811_REG_TSC_DATA_X         0x4D 
 | |
| #define STMPE811_REG_TSC_DATA_Y         0x4F
 | |
| #define STMPE811_REG_TSC_DATA_Z         0x51
 | |
| #define STMPE811_REG_TSC_DATA_XYZ       0x52 
 | |
| #define STMPE811_REG_TSC_FRACT_XYZ      0x56
 | |
| #define STMPE811_REG_TSC_DATA_INC       0x57
 | |
| #define STMPE811_REG_TSC_DATA_NON_INC   0xD7
 | |
| #define STMPE811_REG_TSC_I_DRIVE        0x58
 | |
| #define STMPE811_REG_TSC_SHIELD         0x59
 | |
| 
 | |
| /* Touch Screen Pins definition */ 
 | |
| #define STMPE811_TOUCH_YD               STMPE811_PIN_7 
 | |
| #define STMPE811_TOUCH_XD               STMPE811_PIN_6
 | |
| #define STMPE811_TOUCH_YU               STMPE811_PIN_5
 | |
| #define STMPE811_TOUCH_XU               STMPE811_PIN_4
 | |
| #define STMPE811_TOUCH_IO_ALL           (uint32_t)(STMPE811_TOUCH_YD | STMPE811_TOUCH_XD | STMPE811_TOUCH_YU | STMPE811_TOUCH_XU)
 | |
| 
 | |
| /* IO Pins definition */ 
 | |
| #define STMPE811_PIN_0                  0x01
 | |
| #define STMPE811_PIN_1                  0x02
 | |
| #define STMPE811_PIN_2                  0x04
 | |
| #define STMPE811_PIN_3                  0x08
 | |
| #define STMPE811_PIN_4                  0x10
 | |
| #define STMPE811_PIN_5                  0x20
 | |
| #define STMPE811_PIN_6                  0x40
 | |
| #define STMPE811_PIN_7                  0x80
 | |
| #define STMPE811_PIN_ALL                0xFF
 | |
| 
 | |
| /* IO Pins directions */ 
 | |
| #define STMPE811_DIRECTION_IN           0x00
 | |
| #define STMPE811_DIRECTION_OUT          0x01
 | |
| 
 | |
| /* IO IT types */   
 | |
| #define STMPE811_TYPE_LEVEL             0x00
 | |
| #define STMPE811_TYPE_EDGE              0x02
 | |
| 
 | |
| /* IO IT polarity */   
 | |
| #define STMPE811_POLARITY_LOW           0x00
 | |
| #define STMPE811_POLARITY_HIGH          0x04
 | |
| 
 | |
| /* IO Pin IT edge modes */
 | |
| #define STMPE811_EDGE_FALLING           0x01
 | |
| #define STMPE811_EDGE_RISING            0x02
 | |
| 
 | |
| /* TS registers masks */
 | |
| #define STMPE811_TS_CTRL_ENABLE         0x01  
 | |
| #define STMPE811_TS_CTRL_STATUS         0x80
 | |
| /**
 | |
|   * @}
 | |
|   */ 
 | |
|    
 | |
| /** @defgroup STMPE811_Exported_Macros
 | |
|   * @{
 | |
|   */ 
 | |
| /**
 | |
|   * @}
 | |
|   */ 
 | |
|    
 | |
| /** @defgroup STMPE811_Exported_Functions
 | |
|   * @{
 | |
|   */
 | |
| 
 | |
| /** 
 | |
|   * @brief STMPE811 Control functions
 | |
|   */
 | |
| void     stmpe811_Init(uint16_t DeviceAddr);
 | |
| void     stmpe811_Reset(uint16_t DeviceAddr);
 | |
| uint16_t stmpe811_ReadID(uint16_t DeviceAddr);
 | |
| void     stmpe811_EnableGlobalIT(uint16_t DeviceAddr);
 | |
| void     stmpe811_DisableGlobalIT(uint16_t DeviceAddr);
 | |
| void     stmpe811_EnableITSource(uint16_t DeviceAddr, uint8_t Source);
 | |
| void     stmpe811_DisableITSource(uint16_t DeviceAddr, uint8_t Source);
 | |
| void     stmpe811_SetITPolarity(uint16_t DeviceAddr, uint8_t Polarity);
 | |
| void     stmpe811_SetITType(uint16_t DeviceAddr, uint8_t Type);
 | |
| uint8_t  stmpe811_GlobalITStatus(uint16_t DeviceAddr, uint8_t Source);
 | |
| uint8_t  stmpe811_ReadGITStatus(uint16_t DeviceAddr, uint8_t Source);
 | |
| void     stmpe811_ClearGlobalIT(uint16_t DeviceAddr, uint8_t Source);
 | |
| 
 | |
| /** 
 | |
|   * @brief STMPE811 IO functionalities functions
 | |
|   */
 | |
| void     stmpe811_IO_Start(uint16_t DeviceAddr, uint32_t IO_Pin);
 | |
| uint8_t  stmpe811_IO_Config(uint16_t DeviceAddr, uint32_t IO_Pin, IO_ModeTypedef IO_Mode);
 | |
| void     stmpe811_IO_InitPin(uint16_t DeviceAddr, uint32_t IO_Pin, uint8_t Direction);
 | |
| void     stmpe811_IO_EnableAF(uint16_t DeviceAddr, uint32_t IO_Pin);
 | |
| void     stmpe811_IO_DisableAF(uint16_t DeviceAddr, uint32_t IO_Pin);
 | |
| void     stmpe811_IO_SetEdgeMode(uint16_t DeviceAddr, uint32_t IO_Pin, uint8_t Edge);
 | |
| void     stmpe811_IO_WritePin(uint16_t DeviceAddr, uint32_t IO_Pin, uint8_t PinState);
 | |
| uint32_t stmpe811_IO_ReadPin(uint16_t DeviceAddr, uint32_t IO_Pin);
 | |
| void     stmpe811_IO_EnableIT(uint16_t DeviceAddr);
 | |
| void     stmpe811_IO_DisableIT(uint16_t DeviceAddr);
 | |
| void     stmpe811_IO_EnablePinIT(uint16_t DeviceAddr, uint32_t IO_Pin);
 | |
| void     stmpe811_IO_DisablePinIT(uint16_t DeviceAddr, uint32_t IO_Pin);
 | |
| uint32_t stmpe811_IO_ITStatus(uint16_t DeviceAddr, uint32_t IO_Pin);
 | |
| void     stmpe811_IO_ClearIT(uint16_t DeviceAddr, uint32_t IO_Pin);
 | |
| 
 | |
| /** 
 | |
|   * @brief STMPE811 Touch screen functionalities functions
 | |
|   */
 | |
| void     stmpe811_TS_Start(uint16_t DeviceAddr);
 | |
| uint8_t  stmpe811_TS_DetectTouch(uint16_t DeviceAddr);
 | |
| void     stmpe811_TS_GetXY(uint16_t DeviceAddr, uint16_t *X, uint16_t *Y);
 | |
| void     stmpe811_TS_EnableIT(uint16_t DeviceAddr);
 | |
| void     stmpe811_TS_DisableIT(uint16_t DeviceAddr);
 | |
| uint8_t  stmpe811_TS_ITStatus (uint16_t DeviceAddr);
 | |
| void     stmpe811_TS_ClearIT (uint16_t DeviceAddr);
 | |
| 
 | |
| void     IOE_Init(void);
 | |
| void     IOE_ITConfig (void);
 | |
| void     IOE_Delay(uint32_t delay);
 | |
| void     IOE_Write(uint8_t addr, uint8_t reg, uint8_t value);
 | |
| uint8_t  IOE_Read(uint8_t addr, uint8_t reg);
 | |
| uint16_t IOE_ReadMultiple(uint8_t addr, uint8_t reg, uint8_t *buffer, uint16_t length);
 | |
| 
 | |
| /* Touch screen driver structure */
 | |
| extern TS_DrvTypeDef stmpe811_ts_drv;
 | |
| 
 | |
| /* IO driver structure */
 | |
| extern IO_DrvTypeDef stmpe811_io_drv;
 | |
| 
 | |
| #ifdef __cplusplus
 | |
| }
 | |
| #endif
 | |
| #endif /* __STMPE811_H */
 | |
| 
 | |
| /**
 | |
|   * @}
 | |
|   */ 
 | |
| 
 | |
| /**
 | |
|   * @}
 | |
|   */
 | |
| 
 | |
| /**
 | |
|   * @}
 | |
|   */ 
 | |
| 
 | |
| /**
 | |
|   * @}
 | |
|   */
 | |
| 
 | |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
 |