543 lines
21 KiB
C
543 lines
21 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm3210e_eval.h
|
|
* @author MCD Application Team
|
|
* @version V7.0.0
|
|
* @date 14-April-2017
|
|
* @brief This file contains definitions for STM3210E_EVAL's LEDs,
|
|
* push-buttons and COM ports hardware resources.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM3210E_EVAL_H
|
|
#define __STM3210E_EVAL_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/** @addtogroup BSP
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup STM3210E_EVAL
|
|
* @{
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f1xx_hal.h"
|
|
|
|
/** @addtogroup STM3210E_EVAL_Common
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup STM3210E_EVAL_Exported_Types STM3210E EVAL Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief LED Types Definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
LED1 = 0,
|
|
LED2 = 1,
|
|
LED3 = 2,
|
|
LED4 = 3,
|
|
|
|
LED_GREEN = LED1,
|
|
LED_ORANGE = LED2,
|
|
LED_RED = LED3,
|
|
LED_BLUE = LED4
|
|
|
|
} Led_TypeDef;
|
|
|
|
/**
|
|
* @brief BUTTON Types Definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
BUTTON_WAKEUP = 0,
|
|
BUTTON_TAMPER = 1,
|
|
BUTTON_KEY = 2,
|
|
BUTTON_SEL = 3,
|
|
BUTTON_LEFT = 4,
|
|
BUTTON_RIGHT = 5,
|
|
BUTTON_DOWN = 6,
|
|
BUTTON_UP = 7,
|
|
|
|
} Button_TypeDef;
|
|
|
|
typedef enum
|
|
{
|
|
BUTTON_MODE_GPIO = 0,
|
|
BUTTON_MODE_EXTI = 1,
|
|
BUTTON_MODE_EVT = 2
|
|
|
|
} ButtonMode_TypeDef;
|
|
|
|
/**
|
|
* @brief JOYSTICK Types Definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
JOY_SEL = 0,
|
|
JOY_LEFT = 1,
|
|
JOY_RIGHT = 2,
|
|
JOY_DOWN = 3,
|
|
JOY_UP = 4,
|
|
JOY_NONE = 5
|
|
|
|
}JOYState_TypeDef;
|
|
|
|
typedef enum
|
|
{
|
|
JOY_MODE_GPIO = 0,
|
|
JOY_MODE_EXTI = 1
|
|
|
|
}JOYMode_TypeDef;
|
|
|
|
/**
|
|
* @brief COM Types Definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
COM1 = 0,
|
|
COM2 = 1
|
|
|
|
} COM_TypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup STM3210E_EVAL_Exported_Constants STM3210E EVAL Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Define for STM3210E_EVAL board
|
|
*/
|
|
#if !defined (USE_STM3210E_EVAL)
|
|
#define USE_STM3210E_EVAL
|
|
#endif
|
|
|
|
/** @defgroup STM3210E_EVAL_LED STM3210E EVAL LED
|
|
* @{
|
|
*/
|
|
#define LEDn 4
|
|
|
|
#define LED1_PIN GPIO_PIN_6 /* PF.06*/
|
|
#define LED1_GPIO_PORT GPIOF
|
|
#define LED1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOF_CLK_ENABLE()
|
|
#define LED1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOF_CLK_DISABLE()
|
|
|
|
#define LED2_PIN GPIO_PIN_7 /* PF.07*/
|
|
#define LED2_GPIO_PORT GPIOF
|
|
#define LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOF_CLK_ENABLE()
|
|
#define LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOF_CLK_DISABLE()
|
|
|
|
|
|
#define LED3_PIN GPIO_PIN_8 /* PF.08*/
|
|
#define LED3_GPIO_PORT GPIOF
|
|
#define LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOF_CLK_ENABLE()
|
|
#define LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOF_CLK_DISABLE()
|
|
|
|
|
|
#define LED4_PIN GPIO_PIN_9 /* PF.09*/
|
|
#define LED4_GPIO_PORT GPIOF
|
|
#define LED4_GPIO_CLK_ENABLE() __HAL_RCC_GPIOF_CLK_ENABLE()
|
|
#define LED4_GPIO_CLK_DISABLE() __HAL_RCC_GPIOF_CLK_DISABLE()
|
|
|
|
#define LEDx_GPIO_CLK_ENABLE(__LED__) do { if ((__LED__) == LED1) LED1_GPIO_CLK_ENABLE(); else\
|
|
if ((__LED__) == LED2) LED2_GPIO_CLK_ENABLE(); else \
|
|
if ((__LED__) == LED3) LED3_GPIO_CLK_ENABLE(); else\
|
|
if ((__LED__) == LED4) LED4_GPIO_CLK_ENABLE();} while(0)
|
|
|
|
#define LEDx_GPIO_CLK_DISABLE(__LED__) (((__LED__) == LED1) ? LED1_GPIO_CLK_DISABLE() :\
|
|
((__LED__) == LED2) ? LED2_GPIO_CLK_DISABLE() :\
|
|
((__LED__) == LED3) ? LED3_GPIO_CLK_DISABLE() :\
|
|
((__LED__) == LED4) ? LED4_GPIO_CLK_DISABLE() : 0 )
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup STM3210E_EVAL_BUTTON STM3210E EVAL BUTTON
|
|
* @{
|
|
*/
|
|
#define JOYn 5
|
|
#define BUTTONn 3 + JOYn
|
|
|
|
/**
|
|
* @brief Tamper push-button
|
|
*/
|
|
#define TAMPER_BUTTON_PIN GPIO_PIN_13 /* PC.13*/
|
|
#define TAMPER_BUTTON_GPIO_PORT GPIOC
|
|
#define TAMPER_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
|
|
#define TAMPER_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
|
|
#define TAMPER_BUTTON_EXTI_IRQn EXTI15_10_IRQn
|
|
|
|
/**
|
|
* @brief Key push-button
|
|
*/
|
|
#define KEY_BUTTON_PIN GPIO_PIN_8 /* PG.08*/
|
|
#define KEY_BUTTON_GPIO_PORT GPIOG
|
|
#define KEY_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOG_CLK_ENABLE()
|
|
#define KEY_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOG_CLK_DISABLE()
|
|
#define KEY_BUTTON_EXTI_IRQn EXTI9_5_IRQn
|
|
|
|
/**
|
|
* @brief Wake-up push-button
|
|
*/
|
|
#define WAKEUP_BUTTON_PIN GPIO_PIN_0 /* PA.00*/
|
|
#define WAKEUP_BUTTON_GPIO_PORT GPIOA
|
|
#define WAKEUP_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
|
#define WAKEUP_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
|
#define WAKEUP_BUTTON_EXTI_IRQn EXTI0_IRQn
|
|
|
|
/**
|
|
* @brief Joystick Right push-button
|
|
*/
|
|
#define RIGHT_JOY_PIN GPIO_PIN_13 /* PG.13*/
|
|
#define RIGHT_JOY_GPIO_PORT GPIOG
|
|
#define RIGHT_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOG_CLK_ENABLE()
|
|
#define RIGHT_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOG_CLK_DISABLE()
|
|
#define RIGHT_JOY_EXTI_IRQn EXTI15_10_IRQn
|
|
|
|
/**
|
|
* @brief Joystick Left push-button
|
|
*/
|
|
#define LEFT_JOY_PIN GPIO_PIN_14 /* PG.14*/
|
|
#define LEFT_JOY_GPIO_PORT GPIOG
|
|
#define LEFT_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOG_CLK_ENABLE()
|
|
#define LEFT_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOG_CLK_DISABLE()
|
|
#define LEFT_JOY_EXTI_IRQn EXTI15_10_IRQn
|
|
|
|
/**
|
|
* @brief Joystick Up push-button
|
|
*/
|
|
#define UP_JOY_PIN GPIO_PIN_15 /* PG.15*/
|
|
#define UP_JOY_GPIO_PORT GPIOG
|
|
#define UP_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOG_CLK_ENABLE()
|
|
#define UP_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOG_CLK_DISABLE()
|
|
#define UP_JOY_EXTI_IRQn EXTI15_10_IRQn
|
|
|
|
/**
|
|
* @brief Joystick Down push-button
|
|
*/
|
|
#define DOWN_JOY_PIN GPIO_PIN_3 /* PD.03*/
|
|
#define DOWN_JOY_GPIO_PORT GPIOD
|
|
#define DOWN_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
|
|
#define DOWN_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
|
|
#define DOWN_JOY_EXTI_IRQn EXTI3_IRQn
|
|
|
|
/**
|
|
* @brief Joystick Sel push-button
|
|
*/
|
|
#define SEL_JOY_PIN GPIO_PIN_7 /* PG.07*/
|
|
#define SEL_JOY_GPIO_PORT GPIOG
|
|
#define SEL_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOG_CLK_ENABLE()
|
|
#define SEL_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOG_CLK_DISABLE()
|
|
#define SEL_JOY_EXTI_IRQn EXTI9_5_IRQn
|
|
|
|
#define BUTTONx_GPIO_CLK_ENABLE(__BUTTON__) do { if ((__BUTTON__) == BUTTON_TAMPER) TAMPER_BUTTON_GPIO_CLK_ENABLE(); else\
|
|
if ((__BUTTON__) == BUTTON_KEY) KEY_BUTTON_GPIO_CLK_ENABLE(); else\
|
|
if ((__BUTTON__) == BUTTON_WAKEUP) WAKEUP_BUTTON_GPIO_CLK_ENABLE(); else\
|
|
if ((__BUTTON__) == BUTTON_SEL) SEL_JOY_GPIO_CLK_ENABLE(); else\
|
|
if ((__BUTTON__) == BUTTON_LEFT) LEFT_JOY_GPIO_CLK_ENABLE(); else\
|
|
if ((__BUTTON__) == BUTTON_RIGHT) RIGHT_JOY_GPIO_CLK_ENABLE(); else\
|
|
if ((__BUTTON__) == BUTTON_DOWN) DOWN_JOY_GPIO_CLK_ENABLE(); else\
|
|
if ((__BUTTON__) == BUTTON_UP) UP_JOY_GPIO_CLK_ENABLE();} while(0)
|
|
|
|
#define BUTTONx_GPIO_CLK_DISABLE(__BUTTON__) (((__BUTTON__) == BUTTON_TAMPER) ? TAMPER_BUTTON_GPIO_CLK_DISABLE() :\
|
|
((__BUTTON__) == BUTTON_KEY) ? KEY_BUTTON_GPIO_CLK_DISABLE() :\
|
|
((__BUTTON__) == BUTTON_WAKEUP) ? WAKEUP_BUTTON_GPIO_CLK_DISABLE() :\
|
|
((__BUTTON__) == BUTTON_SEL) ? SEL_JOY_GPIO_CLK_DISABLE() :\
|
|
((__BUTTON__) == BUTTON_LEFT) ? LEFT_JOY_GPIO_CLK_DISABLE() :\
|
|
((__BUTTON__) == BUTTON_RIGHT) ? RIGHT_JOY_GPIO_CLK_DISABLE() :\
|
|
((__BUTTON__) == BUTTON_DOWN) ? DOWN_JOY_GPIO_CLK_DISABLE() :\
|
|
((__BUTTON__) == BUTTON_UP) ? UP_JOY_GPIO_CLK_DISABLE() : 0 )
|
|
|
|
#define JOYx_GPIO_CLK_ENABLE(__JOY__) do { if ((__JOY__) == JOY_SEL) SEL_JOY_GPIO_CLK_ENABLE(); else\
|
|
if ((__JOY__) == JOY_LEFT) LEFT_JOY_GPIO_CLK_ENABLE(); else\
|
|
if ((__JOY__) == JOY_RIGHT) RIGHT_JOY_GPIO_CLK_ENABLE(); else\
|
|
if ((__JOY__) == JOY_DOWN) DOWN_JOY_GPIO_CLK_ENABLE(); else\
|
|
if ((__JOY__) == JOY_UP) UP_JOY_GPIO_CLK_ENABLE();} while(0)
|
|
|
|
#define JOYx_GPIO_CLK_DISABLE(__JOY__) (((__JOY__) == JOY_SEL) ? SEL_JOY_GPIO_CLK_DISABLE() :\
|
|
((__JOY__) == JOY_LEFT) ? LEFT_JOY_GPIO_CLK_DISABLE() :\
|
|
((__JOY__) == JOY_RIGHT) ? RIGHT_JOY_GPIO_CLK_DISABLE() :\
|
|
((__JOY__) == JOY_DOWN) ? DOWN_JOY_GPIO_CLK_DISABLE() :\
|
|
((__JOY__) == JOY_UP) ? UP_JOY_GPIO_CLK_DISABLE() : 0 )
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM3210E_EVAL_COM
|
|
* @{
|
|
*/
|
|
#define COMn 2
|
|
|
|
/**
|
|
* @brief Definition for COM port1, connected to USART1
|
|
*/
|
|
#define EVAL_COM1 USART1
|
|
#define EVAL_COM1_CLK_ENABLE() __HAL_RCC_USART1_CLK_ENABLE()
|
|
#define EVAL_COM1_CLK_DISABLE() __HAL_RCC_USART1_CLK_DISABLE()
|
|
|
|
#define EVAL_COM1_TX_PIN GPIO_PIN_9 /* PA.09*/
|
|
#define EVAL_COM1_TX_GPIO_PORT GPIOA
|
|
#define EVAL_COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
|
#define EVAL_COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
|
|
|
#define EVAL_COM1_RX_PIN GPIO_PIN_10 /* PA.10*/
|
|
#define EVAL_COM1_RX_GPIO_PORT GPIOA
|
|
#define EVAL_COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
|
#define EVAL_COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
|
|
|
#define EVAL_COM1_IRQn USART1_IRQn
|
|
|
|
/**
|
|
* @brief Definition for COM port2, connected to USART2
|
|
*/
|
|
#define EVAL_COM2 USART2
|
|
#define EVAL_COM2_CLK_ENABLE() __HAL_RCC_USART2_CLK_ENABLE()
|
|
#define EVAL_COM2_CLK_DISABLE() __HAL_RCC_USART2_CLK_DISABLE()
|
|
|
|
#define EVAL_COM2_TX_PIN GPIO_PIN_2 /* PA.02*/
|
|
#define EVAL_COM2_TX_GPIO_PORT GPIOA
|
|
#define EVAL_COM2_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
|
#define EVAL_COM2_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
|
|
|
#define EVAL_COM2_RX_PIN GPIO_PIN_3 /* PA.03*/
|
|
#define EVAL_COM2_RX_GPIO_PORT GPIOA
|
|
#define EVAL_COM2_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
|
#define EVAL_COM2_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
|
|
|
#define EVAL_COM2_IRQn USART2_IRQn
|
|
|
|
#define COMx_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) EVAL_COM1_CLK_ENABLE(); else\
|
|
if((__INDEX__) == COM2) EVAL_COM2_CLK_ENABLE();} while(0)
|
|
|
|
#define COMx_CLK_DISABLE(__INDEX__) (((__INDEX__) == COM1) ? EVAL_COM1_CLK_DISABLE() :\
|
|
((__INDEX__) == COM2) ? EVAL_COM2_CLK_DISABLE() : 0)
|
|
|
|
#define COMx_TX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) EVAL_COM1_TX_GPIO_CLK_ENABLE(); else\
|
|
if((__INDEX__) == COM2) EVAL_COM2_TX_GPIO_CLK_ENABLE();} while(0)
|
|
|
|
#define COMx_TX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == COM1) ? EVAL_COM1_TX_GPIO_CLK_DISABLE() :\
|
|
((__INDEX__) == COM2) ? EVAL_COM2_TX_GPIO_CLK_DISABLE() : 0)
|
|
|
|
#define COMx_RX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) EVAL_COM1_RX_GPIO_CLK_ENABLE(); else\
|
|
if((__INDEX__) == COM2) EVAL_COM2_RX_GPIO_CLK_ENABLE();} while(0)
|
|
|
|
#define COMx_RX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == COM1) ? EVAL_COM1_RX_GPIO_CLK_DISABLE() :\
|
|
((__INDEX__) == COM2) ? EVAL_COM2_RX_GPIO_CLK_DISABLE() : 0)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup STM3210E_EVAL_BUS STM3210E EVAL BUS
|
|
* @{
|
|
*/
|
|
|
|
/* Exported constant IO ------------------------------------------------------*/
|
|
/*##################### I2Cx ###################################*/
|
|
/* User can use this section to tailor I2Cx instance used and associated
|
|
resources */
|
|
/* Definition for I2Cx Pins */
|
|
#define EVAL_I2Cx_SCL_PIN GPIO_PIN_6 /* PB.06*/
|
|
#define EVAL_I2Cx_SCL_GPIO_PORT GPIOB
|
|
#define EVAL_I2Cx_SDA_PIN GPIO_PIN_7 /* PB.07*/
|
|
#define EVAL_I2Cx_SDA_GPIO_PORT GPIOB
|
|
|
|
/* Definition for I2Cx clock resources */
|
|
#define EVAL_I2Cx I2C1
|
|
#define EVAL_I2Cx_CLK_ENABLE() __HAL_RCC_I2C1_CLK_ENABLE()
|
|
#define EVAL_I2Cx_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
|
|
#define EVAL_I2Cx_SCL_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
|
|
|
|
#define EVAL_I2Cx_FORCE_RESET() __HAL_RCC_I2C1_FORCE_RESET()
|
|
#define EVAL_I2Cx_RELEASE_RESET() __HAL_RCC_I2C1_RELEASE_RESET()
|
|
|
|
/* Definition for I2Cx's NVIC */
|
|
#define EVAL_I2Cx_EV_IRQn I2C1_EV_IRQn
|
|
#define EVAL_I2Cx_EV_IRQHandler I2C1_EV_IRQHandler
|
|
#define EVAL_I2Cx_ER_IRQn I2C1_ER_IRQn
|
|
#define EVAL_I2Cx_ER_IRQHandler I2C1_ER_IRQHandler
|
|
|
|
/* I2C clock speed configuration (in Hz)
|
|
WARNING:
|
|
Make sure that this define is not already declared in other files (ie.
|
|
stm3210e_eval.h file). It can be used in parallel by other modules. */
|
|
#ifndef BSP_I2C_SPEED
|
|
#define BSP_I2C_SPEED 100000
|
|
#endif /* I2C_SPEED */
|
|
|
|
|
|
/* Maximum Timeout values for flags waiting loops. These timeouts are not based
|
|
on accurate values, they just guarantee that the application will not remain
|
|
stuck if the I2C communication is corrupted.
|
|
You may modify these timeout values depending on CPU frequency and application
|
|
conditions (interrupts routines ...). */
|
|
#define EVAL_I2Cx_TIMEOUT_MAX 3000
|
|
|
|
/*##################### SPIx ###################################*/
|
|
#define EVAL_SPIx SPI1
|
|
#define EVAL_SPIx_CLK_ENABLE() __HAL_RCC_SPI1_CLK_ENABLE()
|
|
|
|
#define EVAL_SPIx_SCK_GPIO_PORT GPIOA /* PA.05*/
|
|
#define EVAL_SPIx_SCK_PIN GPIO_PIN_5
|
|
#define EVAL_SPIx_SCK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
|
#define EVAL_SPIx_SCK_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
|
|
|
#define EVAL_SPIx_MISO_MOSI_GPIO_PORT GPIOA
|
|
#define EVAL_SPIx_MISO_MOSI_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
|
#define EVAL_SPIx_MISO_MOSI_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
|
#define EVAL_SPIx_MISO_PIN GPIO_PIN_6 /* PA.06*/
|
|
#define EVAL_SPIx_MOSI_PIN GPIO_PIN_7 /* PA.07*/
|
|
/* Maximum Timeout values for flags waiting loops. These timeouts are not based
|
|
on accurate values, they just guarantee that the application will not remain
|
|
stuck if the SPI communication is corrupted.
|
|
You may modify these timeout values depending on CPU frequency and application
|
|
conditions (interrupts routines ...). */
|
|
#define EVAL_SPIx_TIMEOUT_MAX 1000
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup STM3210E_EVAL_COMPONENT STM3210E EVAL COMPONENT
|
|
* @{
|
|
*/
|
|
|
|
/*##################### FLASH SPI ###################################*/
|
|
/**
|
|
* @brief M25P FLASH SPI Chip Select macro definition
|
|
*/
|
|
#define FLASH_SPI_CS_LOW() HAL_GPIO_WritePin(FLASH_SPI_CS_GPIO_PORT, FLASH_SPI_CS_PIN, GPIO_PIN_RESET)
|
|
#define FLASH_SPI_CS_HIGH() HAL_GPIO_WritePin(FLASH_SPI_CS_GPIO_PORT, FLASH_SPI_CS_PIN, GPIO_PIN_SET)
|
|
|
|
/**
|
|
* @brief M25P FLASH SPI Control Interface pins
|
|
*/
|
|
#define FLASH_SPI_CS_PIN GPIO_PIN_2 /* PB.02*/
|
|
#define FLASH_SPI_CS_GPIO_PORT GPIOB
|
|
#define FLASH_SPI_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
|
|
#define FLASH_SPI_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
|
|
|
|
/**
|
|
* @brief M25P FLASH SPI supported commands
|
|
*/
|
|
#define FLASH_SPI_CMD_WRITE 0x02 /*!< Write to Memory instruction */
|
|
#define FLASH_SPI_CMD_WRSR 0x01 /*!< Write Status Register instruction */
|
|
#define FLASH_SPI_CMD_WREN 0x06 /*!< Write enable instruction */
|
|
#define FLASH_SPI_CMD_READ 0x03 /*!< Read from Memory instruction */
|
|
#define FLASH_SPI_CMD_RDSR 0x05 /*!< Read Status Register instruction */
|
|
#define FLASH_SPI_CMD_RDID 0x9F /*!< Read identification */
|
|
#define FLASH_SPI_CMD_SE 0xD8 /*!< Sector Erase instruction */
|
|
#define FLASH_SPI_CMD_BE 0xC7 /*!< Bulk Erase instruction */
|
|
|
|
#define FLASH_SPI_WIP_FLAG 0x01 /*!< Write In Progress (WIP) flag */
|
|
|
|
#define FLASH_SPI_DUMMY_BYTE 0xA5
|
|
#define FLASH_SPI_PAGESIZE 0x100
|
|
|
|
#define FLASH_SPI_M25P128_ID 0x202018
|
|
#define FLASH_SPI_M25P64_ID 0x202017
|
|
|
|
|
|
/*##################### AUDIO ##########################*/
|
|
/**
|
|
* @brief AUDIO I2C Interface pins
|
|
*/
|
|
#define AUDIO_I2C_ADDRESS 0x27
|
|
|
|
/* Audio Reset Pin definition */
|
|
#define AUDIO_RESET_GPIO_CLK_ENABLE() __HAL_RCC_GPIOG_CLK_ENABLE()
|
|
#define AUDIO_RESET_PIN GPIO_PIN_11
|
|
#define AUDIO_RESET_GPIO GPIOG
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
|
|
/** @addtogroup STM3210E_EVAL_Exported_Functions
|
|
* @{
|
|
*/
|
|
uint32_t BSP_GetVersion(void);
|
|
void BSP_LED_Init(Led_TypeDef Led);
|
|
void BSP_LED_On(Led_TypeDef Led);
|
|
void BSP_LED_Off(Led_TypeDef Led);
|
|
void BSP_LED_Toggle(Led_TypeDef Led);
|
|
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode);
|
|
uint32_t BSP_PB_GetState(Button_TypeDef Button);
|
|
#ifdef HAL_UART_MODULE_ENABLED
|
|
void BSP_COM_Init(COM_TypeDef COM, UART_HandleTypeDef* huart);
|
|
#endif /* HAL_UART_MODULE_ENABLED */
|
|
uint8_t BSP_JOY_Init(JOYMode_TypeDef Joy_Mode);
|
|
JOYState_TypeDef BSP_JOY_GetState(void);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM3210E_EVAL_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
|