215 lines
6.2 KiB
C
215 lines
6.2 KiB
C
/**
|
|
******************************************************************************
|
|
* @file PWR/PWR_PVD/Src/main.c
|
|
* @author MCD Application Team
|
|
* @brief This sample code shows how to use STM32F1xx PWR HAL API to manage the
|
|
* Programmable Voltage Detector (PVD).
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
|
|
/** @addtogroup STM32F1xx_HAL_Examples
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup PWR_PVD
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
PWR_PVDTypeDef sConfigPVD;
|
|
__IO uint32_t uwToggleOn = 1;
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
void SystemClock_Config(void);
|
|
static void PVD_Config(void);
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Main program
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
int main(void)
|
|
{
|
|
/* STM32F103xG HAL library initialization:
|
|
- Configure the Flash prefetch
|
|
- Systick timer is configured by default as source of time base, but user
|
|
can eventually implement his proper time base source (a general purpose
|
|
timer for example or other time source), keeping in mind that Time base
|
|
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
|
|
handled in milliseconds basis.
|
|
- Set NVIC Group Priority to 4
|
|
- Low Level Initialization
|
|
*/
|
|
HAL_Init();
|
|
|
|
/* Configure the system clock to 72 MHz */
|
|
SystemClock_Config();
|
|
|
|
/* Configure LEDs */
|
|
BSP_LED_Init(LED1);
|
|
BSP_LED_Init(LED3);
|
|
|
|
/* Configure the PVD */
|
|
PVD_Config();
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
/* LED1 toggles when the voltage is above the target threshold */
|
|
if (uwToggleOn)
|
|
{
|
|
BSP_LED_Toggle(LED1);
|
|
HAL_Delay(200);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Configures the PVD resources.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void PVD_Config(void)
|
|
{
|
|
/*##-1- Enable Power Clock #################################################*/
|
|
__HAL_RCC_PWR_CLK_ENABLE();
|
|
|
|
/*##-2- Configure the NVIC for PVD #########################################*/
|
|
HAL_NVIC_SetPriority(PVD_IRQn, 0, 0);
|
|
HAL_NVIC_EnableIRQ(PVD_IRQn);
|
|
|
|
/* Configure the PVD Level to 3 and generate an interrupt on rising and falling
|
|
edges(PVD detection level set to 2.5V, refer to the electrical characteristics
|
|
of you device datasheet for more details) */
|
|
sConfigPVD.PVDLevel = PWR_PVDLEVEL_3;
|
|
sConfigPVD.Mode = PWR_PVD_MODE_IT_RISING_FALLING;
|
|
HAL_PWR_ConfigPVD(&sConfigPVD);
|
|
|
|
/* Enable the PVD Output */
|
|
HAL_PWR_EnablePVD();
|
|
}
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* The system Clock is configured as follow :
|
|
* System Clock source = PLL (HSE)
|
|
* SYSCLK(Hz) = 72000000
|
|
* HCLK(Hz) = 72000000
|
|
* AHB Prescaler = 1
|
|
* APB1 Prescaler = 2
|
|
* APB2 Prescaler = 1
|
|
* HSE Frequency(Hz) = 8000000
|
|
* HSE PREDIV1 = 1
|
|
* PLLMUL = 9
|
|
* Flash Latency(WS) = 2
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemClock_Config(void)
|
|
{
|
|
RCC_ClkInitTypeDef clkinitstruct = {0};
|
|
RCC_OscInitTypeDef oscinitstruct = {0};
|
|
|
|
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
|
oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
|
oscinitstruct.HSEState = RCC_HSE_ON;
|
|
oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
|
|
oscinitstruct.PLL.PLLState = RCC_PLL_ON;
|
|
oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
|
oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL9;
|
|
if (HAL_RCC_OscConfig(&oscinitstruct)!= HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
while(1);
|
|
}
|
|
|
|
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
|
clocks dividers */
|
|
clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
|
clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
|
clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
|
clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
|
if (HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2)!= HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
while(1);
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief SYSTICK callback
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void HAL_SYSTICK_Callback(void)
|
|
{
|
|
HAL_IncTick();
|
|
}
|
|
|
|
/**
|
|
* @brief PWR PVD interrupt callback
|
|
* @param none
|
|
* @retval none
|
|
*/
|
|
void HAL_PWR_PVDCallback(void)
|
|
{
|
|
/* Set LED1 on */
|
|
BSP_LED_On(LED1);
|
|
/* update uwToggleOn global variable so that LED1 blinks when the
|
|
voltage is above the target threshold */
|
|
uwToggleOn = (uwToggleOn+1) % 2;
|
|
}
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
|
|
/**
|
|
* @brief Reports the name of the source file and the source line number
|
|
* where the assert_param error has occurred.
|
|
* @param file: pointer to the source file name
|
|
* @param line: assert_param error line source number
|
|
* @retval None
|
|
*/
|
|
void assert_failed(uint8_t *file, uint32_t line)
|
|
{
|
|
/* User can add his own implementation to report the file name and line number,
|
|
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
|
Error_Handler();
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|