245 lines
6.7 KiB
C
245 lines
6.7 KiB
C
/**
|
|
******************************************************************************
|
|
* @file Examples_LL/RCC/RCC_OutputSystemClockOnMCO/Src/main.c
|
|
* @author MCD Application Team
|
|
* @brief This example describes how to how to configure MCO pin to output
|
|
* the system clock through the STM32F1xx RCC LL API.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
|
|
/** @addtogroup STM32F1xx_LL_Examples
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup RCC_OutputSystemClockOnMCO
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Number of MCO Config */
|
|
#define RCC_MCO_CONFIG_NB 3
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Variable to set different MCO config */
|
|
static uint32_t aMCO_Src[RCC_MCO_CONFIG_NB] = {
|
|
LL_RCC_MCO1SOURCE_SYSCLK,
|
|
LL_RCC_MCO1SOURCE_PLLCLK_DIV_2,
|
|
LL_RCC_MCO1SOURCE_HSE
|
|
};
|
|
|
|
/* MCO Config index */
|
|
__IO uint8_t bMCOIndex = 0;
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
void SystemClock_Config(void);
|
|
void MCO_ConfigGPIO(void);
|
|
void LED_Init(void);
|
|
void UserButton_Init(void);
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Main program
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
int main(void)
|
|
{
|
|
/* Configure the system clock to 72 MHz */
|
|
SystemClock_Config();
|
|
|
|
/* Initialize LED2 */
|
|
LED_Init();
|
|
|
|
/* Initialize button in EXTI mode */
|
|
UserButton_Init();
|
|
|
|
/* Configure GPIO for MCO */
|
|
MCO_ConfigGPIO();
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
/* All the process are managed in UserButton_Callback function */
|
|
/* Each time, user press user-button, a new MCO config is set */
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Configure MCO pin (PA8).
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void MCO_ConfigGPIO(void)
|
|
{
|
|
/* MCO Clock Enable */
|
|
LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_GPIOA);
|
|
|
|
/* Configure the MCO pin in alternate function mode */
|
|
LL_GPIO_SetPinMode(GPIOA, LL_GPIO_PIN_8, LL_GPIO_MODE_ALTERNATE);
|
|
LL_GPIO_SetPinOutputType(GPIOA, LL_GPIO_PIN_8, LL_GPIO_OUTPUT_PUSHPULL);
|
|
LL_GPIO_SetPinSpeed(GPIOA, LL_GPIO_PIN_8, LL_GPIO_SPEED_FREQ_HIGH);
|
|
}
|
|
|
|
/**
|
|
* @brief Initialize LED2.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void LED_Init(void)
|
|
{
|
|
/* Enable the LED2 Clock */
|
|
LED2_GPIO_CLK_ENABLE();
|
|
|
|
/* Configure IO in output push-pull mode to drive external LED2 */
|
|
LL_GPIO_SetPinMode(LED2_GPIO_PORT, LED2_PIN, LL_GPIO_MODE_OUTPUT);
|
|
}
|
|
|
|
/**
|
|
* @brief Configures User push-button in GPIO or EXTI Line Mode.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void UserButton_Init(void)
|
|
{
|
|
/* Enable the BUTTON Clock */
|
|
USER_BUTTON_GPIO_CLK_ENABLE();
|
|
|
|
/* Configure GPIO for BUTTON */
|
|
LL_GPIO_SetPinMode(USER_BUTTON_GPIO_PORT, USER_BUTTON_PIN, LL_GPIO_MODE_INPUT);
|
|
|
|
/* Connect External Line to the GPIO*/
|
|
USER_BUTTON_GPIO_AF_SET_EXTI();
|
|
|
|
/* Enable a rising trigger EXTI line 13 Interrupt */
|
|
USER_BUTTON_EXTI_LINE_ENABLE();
|
|
USER_BUTTON_EXTI_FALLING_TRIG_ENABLE();
|
|
|
|
/* Configure NVIC for USER_BUTTON_EXTI_IRQn */
|
|
NVIC_EnableIRQ(USER_BUTTON_EXTI_IRQn);
|
|
NVIC_SetPriority(USER_BUTTON_EXTI_IRQn,0x03);
|
|
}
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* The system Clock is configured as follow :
|
|
* System Clock source = PLL (HSE)
|
|
* SYSCLK(Hz) = 72000000
|
|
* HCLK(Hz) = 72000000
|
|
* AHB Prescaler = 1
|
|
* APB1 Prescaler = 2
|
|
* APB2 Prescaler = 1
|
|
* HSE Frequency(Hz) = 8000000
|
|
* PLLMUL = 9
|
|
* Flash Latency(WS) = 2
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemClock_Config(void)
|
|
{
|
|
/* Set FLASH latency */
|
|
LL_FLASH_SetLatency(LL_FLASH_LATENCY_2);
|
|
|
|
/* Enable HSE oscillator */
|
|
LL_RCC_HSE_EnableBypass();
|
|
LL_RCC_HSE_Enable();
|
|
while(LL_RCC_HSE_IsReady() != 1)
|
|
{
|
|
};
|
|
|
|
/* Main PLL configuration and activation */
|
|
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE_DIV_1, LL_RCC_PLL_MUL_9);
|
|
|
|
LL_RCC_PLL_Enable();
|
|
while(LL_RCC_PLL_IsReady() != 1)
|
|
{
|
|
};
|
|
|
|
/* Sysclk activation on the main PLL */
|
|
LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
|
|
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
|
|
while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
|
|
{
|
|
};
|
|
|
|
/* Set APB1 & APB2 prescaler*/
|
|
LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_2);
|
|
LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
|
|
|
|
/* Set systick to 1ms in using frequency set to 72MHz */
|
|
LL_Init1msTick(72000000);
|
|
|
|
/* Update CMSIS variable (which can be updated also through SystemCoreClockUpdate function) */
|
|
LL_SetSystemCoreClock(72000000);
|
|
}
|
|
/******************************************************************************/
|
|
/* USER IRQ HANDLER TREATMENT */
|
|
/******************************************************************************/
|
|
/**
|
|
* @brief Function to manage User button press
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void UserButton_Callback(void)
|
|
{
|
|
register uint32_t source = 0;
|
|
|
|
/* Get the MCO config to apply */
|
|
source = aMCO_Src[bMCOIndex];
|
|
|
|
/* Toggle LED2 to indicate a button press*/
|
|
LL_GPIO_TogglePin(LED2_GPIO_PORT, LED2_PIN);
|
|
|
|
/* Select MCO clock source */
|
|
LL_RCC_ConfigMCO(source);
|
|
|
|
/* Set new MCO config Index */
|
|
bMCOIndex = (bMCOIndex + 1) % RCC_MCO_CONFIG_NB;
|
|
}
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
|
|
/**
|
|
* @brief Reports the name of the source file and the source line number
|
|
* where the assert_param error has occurred.
|
|
* @param file: pointer to the source file name
|
|
* @param line: assert_param error line source number
|
|
* @retval None
|
|
*/
|
|
void assert_failed(uint8_t *file, uint32_t line)
|
|
{
|
|
/* User can add his own implementation to report the file name and line number,
|
|
ex: printf("Wrong parameters value: file %s on line %d", file, line) */
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|