347 lines
11 KiB
C
347 lines
11 KiB
C
/**
|
|
******************************************************************************
|
|
* @file Examples_LL/TIM/TIM_PWMOutput/Src/main.c
|
|
* @author MCD Application Team
|
|
* @brief This example describes how to use a timer peripheral to generate a
|
|
* PWM output signal and update PWM duty cycle
|
|
* using the STM32F1xx TIM LL API.
|
|
* Peripheral initialization done using LL unitary services functions.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
|
|
/** @addtogroup STM32F1xx_LL_Examples
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup TIM_PWMOutput
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Number of output compare modes */
|
|
#define TIM_DUTY_CYCLES_NB 11
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Duty cycles: D = T/P * 100% */
|
|
/* where T is the pulse duration and P the period of the PWM signal */
|
|
static uint32_t aDutyCycle[TIM_DUTY_CYCLES_NB] = {
|
|
0, /* 0% */
|
|
10, /* 10% */
|
|
20, /* 20% */
|
|
30, /* 30% */
|
|
40, /* 40% */
|
|
50, /* 50% */
|
|
60, /* 60% */
|
|
70, /* 70% */
|
|
80, /* 80% */
|
|
90, /* 90% */
|
|
100, /* 100% */
|
|
};
|
|
|
|
/* Duty cycle index */
|
|
static uint8_t iDutyCycle = 0;
|
|
|
|
/* Measured duty cycle */
|
|
__IO uint32_t uwMeasuredDutyCycle = 0;
|
|
|
|
/* TIM2 Clock */
|
|
static uint32_t TimOutClock = 1;
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
__STATIC_INLINE void SystemClock_Config(void);
|
|
__STATIC_INLINE void Configure_TIMPWMOutput(void);
|
|
__STATIC_INLINE void Configure_DutyCycle(uint32_t OCMode);
|
|
__STATIC_INLINE void UserButton_Init(void);
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Main program
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
int main(void)
|
|
{
|
|
/* Configure the system clock to 72 MHz */
|
|
SystemClock_Config();
|
|
|
|
/* Initialize button in EXTI mode */
|
|
UserButton_Init();
|
|
|
|
/* Configure the timer in output compare mode */
|
|
Configure_TIMPWMOutput();
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Configures the timer to generate a PWM signal on the OC1 output.
|
|
* @note Peripheral configuration is minimal configuration from reset values.
|
|
* Thus, some useless LL unitary functions calls below are provided as
|
|
* commented examples - setting is default configuration from reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void Configure_TIMPWMOutput(void)
|
|
{
|
|
/*************************/
|
|
/* GPIO AF configuration */
|
|
/*************************/
|
|
/* Enable the peripheral clock of GPIOs */
|
|
LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_GPIOA);
|
|
|
|
/* GPIO TIM2_CH1 configuration */
|
|
LL_GPIO_SetPinMode(GPIOA, LL_GPIO_PIN_0, LL_GPIO_MODE_ALTERNATE);
|
|
LL_GPIO_SetPinPull(GPIOA, LL_GPIO_PIN_0, LL_GPIO_PULL_DOWN);
|
|
LL_GPIO_SetPinSpeed(GPIOA, LL_GPIO_PIN_0, LL_GPIO_SPEED_FREQ_HIGH);
|
|
|
|
/***********************************************/
|
|
/* Configure the NVIC to handle TIM2 interrupt */
|
|
/***********************************************/
|
|
NVIC_SetPriority(TIM2_IRQn, 0);
|
|
NVIC_EnableIRQ(TIM2_IRQn);
|
|
|
|
/******************************/
|
|
/* Peripheral clocks enabling */
|
|
/******************************/
|
|
/* Enable the timer peripheral clock */
|
|
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_TIM2);
|
|
|
|
/***************************/
|
|
/* Time base configuration */
|
|
/***************************/
|
|
/* Set counter mode */
|
|
/* Reset value is LL_TIM_COUNTERMODE_UP */
|
|
//LL_TIM_SetCounterMode(TIM2, LL_TIM_COUNTERMODE_UP);
|
|
|
|
/* Set the pre-scaler value to have TIM2 counter clock equal to 10 kHz */
|
|
LL_TIM_SetPrescaler(TIM2, __LL_TIM_CALC_PSC(SystemCoreClock, 10000));
|
|
|
|
/* Enable TIM2_ARR register preload. Writing to or reading from the */
|
|
/* auto-reload register accesses the preload register. The content of the */
|
|
/* preload register are transferred into the shadow register at each update */
|
|
/* event (UEV). */
|
|
LL_TIM_EnableARRPreload(TIM2);
|
|
|
|
/* Set the auto-reload value to have a counter frequency of 100 Hz */
|
|
/* TIM2CLK = SystemCoreClock / (APB prescaler & multiplier) */
|
|
TimOutClock = SystemCoreClock/1;
|
|
LL_TIM_SetAutoReload(TIM2, __LL_TIM_CALC_ARR(TimOutClock, LL_TIM_GetPrescaler(TIM2), 100));
|
|
|
|
/*********************************/
|
|
/* Output waveform configuration */
|
|
/*********************************/
|
|
/* Set output mode */
|
|
/* Reset value is LL_TIM_OCMODE_FROZEN */
|
|
LL_TIM_OC_SetMode(TIM2, LL_TIM_CHANNEL_CH1, LL_TIM_OCMODE_PWM1);
|
|
|
|
/* Set output channel polarity */
|
|
/* Reset value is LL_TIM_OCPOLARITY_HIGH */
|
|
//LL_TIM_OC_SetPolarity(TIM2, LL_TIM_CHANNEL_CH1, LL_TIM_OCPOLARITY_HIGH);
|
|
|
|
/* Set compare value to half of the counter period (50% duty cycle ) */
|
|
LL_TIM_OC_SetCompareCH1(TIM2, ( (LL_TIM_GetAutoReload(TIM2) + 1 ) / 2));
|
|
|
|
/* Enable TIM2_CCR1 register preload. Read/Write operations access the */
|
|
/* preload register. TIM2_CCR1 preload value is loaded in the active */
|
|
/* at each update event. */
|
|
LL_TIM_OC_EnablePreload(TIM2, LL_TIM_CHANNEL_CH1);
|
|
|
|
/**************************/
|
|
/* TIM2 interrupts set-up */
|
|
/**************************/
|
|
/* Enable the capture/compare interrupt for channel 1*/
|
|
LL_TIM_EnableIT_CC1(TIM2);
|
|
|
|
/**********************************/
|
|
/* Start output signal generation */
|
|
/**********************************/
|
|
/* Enable output channel 1 */
|
|
LL_TIM_CC_EnableChannel(TIM2, LL_TIM_CHANNEL_CH1);
|
|
|
|
/* Enable counter */
|
|
LL_TIM_EnableCounter(TIM2);
|
|
|
|
/* Force update generation */
|
|
LL_TIM_GenerateEvent_UPDATE(TIM2);
|
|
}
|
|
|
|
/**
|
|
* @brief Changes the duty cycle of the PWM signal.
|
|
* D = (T/P)*100
|
|
* where T is the pulse duration and P is the PWM signal period
|
|
* @param D Duty cycle
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void Configure_DutyCycle(uint32_t D)
|
|
{
|
|
uint32_t P; /* Pulse duration */
|
|
uint32_t T; /* PWM signal period */
|
|
|
|
/* PWM signal period is determined by the value of the auto-reload register */
|
|
T = LL_TIM_GetAutoReload(TIM2) + 1;
|
|
|
|
/* Pulse duration is determined by the value of the compare register. */
|
|
/* Its value is calculated in order to match the requested duty cycle. */
|
|
P = (D*T)/100;
|
|
LL_TIM_OC_SetCompareCH1(TIM2, P);
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Configures User push-button in GPIO or EXTI Line Mode.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void UserButton_Init(void)
|
|
{
|
|
/* Enable the BUTTON Clock */
|
|
USER_BUTTON_GPIO_CLK_ENABLE();
|
|
|
|
/* Configure GPIO for BUTTON */
|
|
LL_GPIO_SetPinMode(USER_BUTTON_GPIO_PORT, USER_BUTTON_PIN, LL_GPIO_MODE_INPUT);
|
|
LL_GPIO_SetPinPull(USER_BUTTON_GPIO_PORT, USER_BUTTON_PIN, LL_GPIO_PULL_DOWN);
|
|
|
|
/* Connect External Line to the GPIO*/
|
|
USER_BUTTON_SYSCFG_SET_EXTI();
|
|
|
|
/* Enable a rising trigger EXTI line 13 Interrupt */
|
|
USER_BUTTON_EXTI_LINE_ENABLE();
|
|
USER_BUTTON_EXTI_FALLING_TRIG_ENABLE();
|
|
|
|
/* Configure NVIC for USER_BUTTON_EXTI_IRQn */
|
|
NVIC_EnableIRQ(USER_BUTTON_EXTI_IRQn);
|
|
NVIC_SetPriority(USER_BUTTON_EXTI_IRQn,0x03);
|
|
}
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* The system Clock is configured as follow :
|
|
* System Clock source = PLL (HSE)
|
|
* SYSCLK(Hz) = 72000000
|
|
* HCLK(Hz) = 72000000
|
|
* AHB Prescaler = 1
|
|
* APB1 Prescaler = 2
|
|
* APB2 Prescaler = 1
|
|
* HSE Frequency(Hz) = 8000000
|
|
* PLLMUL = 9
|
|
* Flash Latency(WS) = 2
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemClock_Config(void)
|
|
{
|
|
/* Set FLASH latency */
|
|
LL_FLASH_SetLatency(LL_FLASH_LATENCY_2);
|
|
|
|
/* Enable HSE oscillator */
|
|
LL_RCC_HSE_EnableBypass();
|
|
LL_RCC_HSE_Enable();
|
|
while(LL_RCC_HSE_IsReady() != 1)
|
|
{
|
|
};
|
|
|
|
/* Main PLL configuration and activation */
|
|
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE_DIV_1, LL_RCC_PLL_MUL_9);
|
|
|
|
LL_RCC_PLL_Enable();
|
|
while(LL_RCC_PLL_IsReady() != 1)
|
|
{
|
|
};
|
|
|
|
/* Sysclk activation on the main PLL */
|
|
LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
|
|
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
|
|
while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
|
|
{
|
|
};
|
|
|
|
/* Set APB1 & APB2 prescaler*/
|
|
LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_2);
|
|
LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
|
|
|
|
/* Set systick to 1ms in using frequency set to 72MHz */
|
|
LL_Init1msTick(72000000);
|
|
|
|
/* Update CMSIS variable (which can be updated also through SystemCoreClockUpdate function) */
|
|
LL_SetSystemCoreClock(72000000);
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* USER IRQ HANDLER TREATMENT */
|
|
/******************************************************************************/
|
|
/**
|
|
* @brief User button interrupt processing
|
|
* @note When the user key button is pressed the PWM duty cycle is updated.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void UserButton_Callback(void)
|
|
{
|
|
/* Set new duty cycle */
|
|
iDutyCycle = (iDutyCycle + 1) % TIM_DUTY_CYCLES_NB;
|
|
|
|
/* Change PWM signal duty cycle */
|
|
Configure_DutyCycle(aDutyCycle[iDutyCycle]);
|
|
}
|
|
|
|
/**
|
|
* @brief Timer capture/compare interrupt processing
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void TimerCaptureCompare_Callback(void)
|
|
{
|
|
uwMeasuredDutyCycle = (LL_TIM_OC_GetCompareCH1(TIM2) * 100) / ( LL_TIM_GetAutoReload(TIM2) + 1 );
|
|
}
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
|
|
/**
|
|
* @brief Reports the name of the source file and the source line number
|
|
* where the assert_param error has occurred.
|
|
* @param file: pointer to the source file name
|
|
* @param line: assert_param error line source number
|
|
* @retval None
|
|
*/
|
|
void assert_failed(uint8_t *file, uint32_t line)
|
|
{
|
|
/* User can add his own implementation to report the file name and line number,
|
|
ex: printf("Wrong parameters value: file %s on line %d", file, line) */
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|