113 lines
4.5 KiB
Plaintext
113 lines
4.5 KiB
Plaintext
/**
|
|
@page BSP Example on how to use the BSP drivers
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2016 STMicroelectronics *******************
|
|
* @file BSP/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the BSP example.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Example Description
|
|
|
|
This example provides a description of how to use the different BSP drivers.
|
|
|
|
At the beginning of the main program the HAL_Init() function is called to reset
|
|
all the peripherals, initialize the Flash interface and the systick.
|
|
Then the SystemClock_Config() function is used to configure the system
|
|
clock (SYSCLK) to run at 72 MHz.
|
|
|
|
This example shows how to use the different functionalities of components
|
|
available on the board by switching between all tests using key button.
|
|
|
|
** Push the User button to start first Test.
|
|
Blue Led (LD4) will blink between each test.Press user key to start another test:
|
|
|
|
** JOYSTICK **
|
|
Use the joystick button to move a pointer inside a rectangle
|
|
(up/down/right/left) and change the pointer color(select).
|
|
|
|
** TOUCHSCREEN **
|
|
This example shows how to use the different Touchscreen features.
|
|
After the touchscreen calibration, use the touchscreen
|
|
functionality to activate all colored circles inside a rectangle..
|
|
|
|
** LCD **
|
|
This example shows how to use the different LCD features to display string
|
|
with different fonts, to display different shapes and to draw a bitmap.
|
|
|
|
** SD **
|
|
This example shows how to erase, write and read the SD card and also
|
|
how to detect the presence of the card.
|
|
|
|
** MEMS ACCELERO **
|
|
This example shows how to use accelerometer mems. You need to color all the
|
|
circles in moving boards: right/left//back/front
|
|
|
|
** EEPROM **
|
|
This example show how to read and write data in EEPROM I2C M24CXX connected on STM3210C-EVAL RevC
|
|
* The I2C EEPROM memory (M24CXX) is directly mounted on STM3210C-EVAL RevC
|
|
|
|
** AUDIO PLAY **
|
|
This example show how to play/pause/resume or change the volume (min 50% / max 100 %)
|
|
of an audio playback using Key or Joystick button.
|
|
|
|
Plug a headphone to ear the sound /!\ Take care of yours ears.
|
|
Default volume is 60%.
|
|
A press of JOY_SEL button will pause the audio file play (LED 1 green keep previous state
|
|
and LED2 orange ON).
|
|
Another press on JOY_SEL button will resumes audio file play (only LED 1 green blink at each replay)
|
|
@Note: Copy file 'audio.bin' (available in Utilities\Media\AudioFile folder) directly in the flash
|
|
at @0x08015000 using ST-Link utility
|
|
|
|
|
|
** LCD LOG **
|
|
This example show how to use the LCD log features.
|
|
|
|
@par Directory contents
|
|
|
|
- BSP/Src/main.c Main program
|
|
- BSP/Src/system_stm32f1xx.c STM32F1xx system clock configuration file
|
|
- BSP/Src/stm32f1xx_it.c Interrupt handlers
|
|
- BSP/Src/joystick.c joystick feature
|
|
- BSP/Src/lcd.c LCD drawing features
|
|
- BSP/Src/log.c LCD Log firmware functions
|
|
- BSP/Src/sd.c SD features
|
|
- BSP/Src/eeprom.c EEPROM Read/Write features
|
|
- BSP/Src/temperature_sensor.c Temperature Sensor features
|
|
- BSP/Inc/main.h Main program header file
|
|
- BSP/Inc/stm32f1xx_conf.h HAL Configuration file
|
|
- BSP/Inc/stm32f1xx_it.h Interrupt handlers header file
|
|
- BSP/Inc/lcd_log_conf.h lcd_log configuration template file
|
|
- BSP/Inc/stlogo.h Image used for BSP example
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs on STM32F107xC devices.
|
|
|
|
- This example has been tested with STMicroelectronics STM3210C-EVAL RevC
|
|
evaluation boards and can be easily tailored to any other supported device
|
|
and development board.
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the example
|
|
|
|
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
|
|
*/
|