Milad
/
STM32CubeF1
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
STM32CubeF1/Projects/STM3210E_EVAL/Examples/BSP/Src/sd.c

260 lines
8.3 KiB
C
Raw Blame History

/**
******************************************************************************
* @file sd.c
* @author MCD Application Team
* @brief This example code shows how to use the SD Driver
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/** @addtogroup STM32F1xx_HAL_Examples
* @{
*/
/** @addtogroup BSP
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define BLOCK_START_ADDR 0 /* Block start address */
#define NUM_OF_BLOCKS 5 /* Total number of blocks */
#define BUFFER_WORDS_SIZE ((BLOCKSIZE * NUM_OF_BLOCKS) >> 2) /* Total data size in bytes */
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
uint32_t aTxBuffer[BUFFER_WORDS_SIZE];
uint32_t aRxBuffer[BUFFER_WORDS_SIZE];
/* Private function prototypes -----------------------------------------------*/
static void SD_SetHint(void);
static void Fill_Buffer(uint32_t *pBuffer, uint32_t uwBufferLenght, uint32_t uwOffset);
static uint8_t Buffercmp(uint32_t* pBuffer1, uint32_t* pBuffer2, uint16_t BufferLength);
/* Private functions ---------------------------------------------------------*/
/**
* @brief SD Demo
* @param None
* @retval None
*/
void SD_demo (void)
{
uint8_t SD_state = MSD_OK;
__IO uint8_t prev_status = 0;
SD_SetHint();
SD_state = BSP_SD_Init();
/* Check if the SD card is plugged in the slot */
if(BSP_SD_IsDetected() == SD_PRESENT)
{
BSP_LCD_SetTextColor(LCD_COLOR_GREEN);
BSP_LCD_DisplayStringAt(20, BSP_LCD_GetYSize()-30, (uint8_t *)"SD Connected ", LEFT_MODE);
}
else
{
BSP_LCD_SetTextColor(LCD_COLOR_RED);
BSP_LCD_DisplayStringAt(20, BSP_LCD_GetYSize()-30, (uint8_t *)"SD Not Connected", LEFT_MODE);
}
BSP_LCD_SetTextColor(LCD_COLOR_BLACK);
if(SD_state != MSD_OK)
{
BSP_LCD_DisplayStringAt(20, 100, (uint8_t *)"SD INITIALIZATION : FAIL.", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 115, (uint8_t *)"SD Test Aborted.", LEFT_MODE);
}
else
{
BSP_LCD_DisplayStringAt(20, 100, (uint8_t *)"SD INITIALIZATION : OK.", LEFT_MODE);
SD_state = BSP_SD_Erase(BLOCK_START_ADDR, NUM_OF_BLOCKS);
/* Wait until SD cards are ready to use for new operation */
while((BSP_SD_GetCardState() != SD_TRANSFER_OK))
{
}
if(SD_state != MSD_OK)
{
BSP_LCD_DisplayStringAt(20, 115, (uint8_t *)"SD GET CARD INFO : FAIL.", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 130, (uint8_t *)"SD Test Aborted.", LEFT_MODE);
}
else
{
BSP_LCD_DisplayStringAt(20, 115, (uint8_t *)"SD GET CARD INFO : OK.", LEFT_MODE);
SD_state = BSP_SD_Erase(BLOCK_START_ADDR, NUM_OF_BLOCKS);
/* Wait until SD cards are ready to use for new operation */
while((BSP_SD_GetCardState() != SD_TRANSFER_OK))
{
}
if(SD_state != MSD_OK)
{
BSP_LCD_DisplayStringAt(20, 130, (uint8_t *)"SD ERASE : FAILED.", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 145, (uint8_t *)"SD Test Aborted.", LEFT_MODE);
}
else
{
BSP_LCD_DisplayStringAt(20, 130, (uint8_t *)"SD ERASE : OK.", LEFT_MODE);
/* Fill the buffer to write */
Fill_Buffer(aTxBuffer, BUFFER_WORDS_SIZE, 0x22FF);
SD_state = BSP_SD_WriteBlocks(aTxBuffer, BLOCK_START_ADDR, NUM_OF_BLOCKS, SD_DATATIMEOUT);
/* Wait until SD cards are ready to use for new operation */
while((BSP_SD_GetCardState() != SD_TRANSFER_OK))
{
}
if(SD_state != MSD_OK)
{
BSP_LCD_DisplayStringAt(20, 145, (uint8_t *)"SD WRITE : FAILED.", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 160, (uint8_t *)"SD Test Aborted.", LEFT_MODE);
}
else
{
BSP_LCD_DisplayStringAt(20, 145, (uint8_t *)"SD WRITE : OK.", LEFT_MODE);
SD_state = BSP_SD_ReadBlocks(aRxBuffer, BLOCK_START_ADDR, NUM_OF_BLOCKS, SD_DATATIMEOUT);
if(SD_state != MSD_OK)
{
BSP_LCD_DisplayStringAt(20, 160, (uint8_t *)"SD READ : FAILED.", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 175, (uint8_t *)"SD Test Aborted.", LEFT_MODE);
}
else
{
BSP_LCD_DisplayStringAt(20, 160, (uint8_t *)"SD READ : OK.", LEFT_MODE);
if(Buffercmp(aTxBuffer, aRxBuffer, BUFFER_WORDS_SIZE) > 0)
{
BSP_LCD_DisplayStringAt(20, 175, (uint8_t *)"SD COMPARE : FAILED.", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 190, (uint8_t *)"SD Test Aborted.", LEFT_MODE);
}
else
{
BSP_LCD_DisplayStringAt(20, 175, (uint8_t *)"SD TEST : OK.", LEFT_MODE);
BSP_LCD_DisplayStringAt(20, 190, (uint8_t *)"SD can be removed.", LEFT_MODE);
}
}
}
}
}
}
while (1)
{
/* Check if the SD card is plugged in the slot */
if(BSP_SD_IsDetected() != SD_PRESENT)
{
if(prev_status == 0)
{
prev_status = 1;
BSP_LCD_SetTextColor(LCD_COLOR_RED);
BSP_LCD_DisplayStringAt(20, BSP_LCD_GetYSize()-30, (uint8_t *)"SD Not Connected", LEFT_MODE);
}
}
else if (prev_status == 1)
{
BSP_SD_Init();
BSP_LCD_SetTextColor(LCD_COLOR_GREEN);
BSP_LCD_DisplayStringAt(20, BSP_LCD_GetYSize()-30, (uint8_t *)"SD Connected ", LEFT_MODE);
prev_status = 0;
}
if(CheckForUserInput() > 0)
{
return;
}
}
}
/**
* @brief Display SD Demo Hint
* @param None
* @retval None
*/
static void SD_SetHint(void)
{
/* Clear the LCD */
BSP_LCD_Clear(LCD_COLOR_WHITE);
/* Set LCD Demo description */
BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
BSP_LCD_SetFont(&Font24);
BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"SD", CENTER_MODE);
BSP_LCD_SetFont(&Font12);
BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"This example shows how to write", CENTER_MODE);
BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"and read data on the microSD and also", CENTER_MODE);
BSP_LCD_DisplayStringAt(0, 60, (uint8_t *)"how to detect the presence of the card", CENTER_MODE);
/* Set the LCD Text Color */
BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
BSP_LCD_DrawRect(10, 90, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize()- 100);
BSP_LCD_DrawRect(11, 91, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize()- 102);
BSP_LCD_SetTextColor(LCD_COLOR_BLACK);
BSP_LCD_SetBackColor(LCD_COLOR_WHITE);
}
/**
* @brief Fills buffer with user predefined data.
* @param pBuffer: pointer on the buffer to fill
* @param uwBufferLenght: size of the buffer to fill
* @param uwOffset: first value to fill on the buffer
* @retval None
*/
static void Fill_Buffer(uint32_t *pBuffer, uint32_t uwBufferLenght, uint32_t uwOffset)
{
uint32_t tmpIndex = 0;
/* Put in global buffer different values */
for (tmpIndex = 0; tmpIndex < uwBufferLenght; tmpIndex++ )
{
pBuffer[tmpIndex] = tmpIndex + uwOffset;
}
}
/**
* @brief Compares two buffers.
* @param pBuffer1, pBuffer2: buffers to be compared.
* @param BufferLength: buffer's length
* @retval 1: pBuffer identical to pBuffer1
* 0: pBuffer differs from pBuffer1
*/
static uint8_t Buffercmp(uint32_t* pBuffer1, uint32_t* pBuffer2, uint16_t BufferLength)
{
while (BufferLength--)
{
if (*pBuffer1 != *pBuffer2)
{
return 1;
}
pBuffer1++;
pBuffer2++;
}
return 0;
}
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Reference in New Issue View Git Blame Copy Permalink