/**
@page ADC_TemperatureSensor ADC example
@verbatim
******************** (C) COPYRIGHT 2016 STMicroelectronics *******************
* @file Examples_LL/ADC/ADC_TemperatureSensor/readme.txt
* @author MCD Application Team
* @brief Description of the ADC_TemperatureSensor example.
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
@endverbatim
@par Example Description
How to use an ADC peripheral to perform a single ADC conversion on the
internal temperature sensor and calculate the temperature in degrees Celsius.
This example uses the polling programming model (for interrupt or DMA
programming models, refer to other examples).
This example is based on the STM32F1xx ADC LL API.
The peripheral initialization is done using LL unitary service functions
for optimization purposes (performance and size).
Example configuration:
ADC is configured to convert a single channel, in single conversion mode,
from SW trigger.
Sequencer of group regular (default group available on ADC of all STM32 devices)
is configured to convert 1 channel: internal channel temperature sensor.
Example execution:
At each press on User Button, the ADC performs 1 conversion of the selected channel.
Software polls for conversion completion.
When conversion is completed, main program reads conversion data
from ADC data register and stores it into a variable, LED2 is turned on.
ADC conversions raw data are computed to physical values
using LL ADC driver helper macro:
- Value of temperature (unit: degree Celsius)
For debug: variables to monitor with debugger watch window:
- "uhADCxConvertedData": ADC group regular conversion data
- "hADCxConvertedData_Temperature_DegreeCelsius": Value of temperature (unit: degree Celsius)
Connection needed:
None.
Other peripherals used:
1 GPIO for User Button
1 GPIO for LED2
@par Directory contents
- ADC/ADC_TemperatureSensor/Inc/stm32f1xx_it.h Interrupt handlers header file
- ADC/ADC_TemperatureSensor/Inc/main.h Header for main.c module
- ADC/ADC_TemperatureSensor/Inc/stm32_assert.h Template file to include assert_failed function
- ADC/ADC_TemperatureSensor/Src/stm32f1xx_it.c Interrupt handlers
- ADC/ADC_TemperatureSensor/Src/main.c Main program
- ADC/ADC_TemperatureSensor/Src/system_stm32f1xx.c STM32F1xx system source file
@par Hardware and Software environment
- This example runs on STM32F103xB devices.
- This example has been tested with STM32F103RB-Nucleo board and can be
easily tailored to any other supported device and development board.
@par How to use it ?
In order to make the program work, you must do the following :
- Open your preferred toolchain
- Rebuild all files and load your image into target memory
- Run the example
*/
42472d601c