109 lines
5.5 KiB
Plaintext
109 lines
5.5 KiB
Plaintext
/**
|
||
@page MSC_Standalone USB Host Mass Storage (MSC) example
|
||
|
||
@verbatim
|
||
******************** (C) COPYRIGHT 2016 STMicroelectronics *******************
|
||
* @file USB_Host/MSC_Standalone/readme.txt
|
||
* @author MCD Application Team
|
||
* @brief Description of the USB Host MSC example.
|
||
******************************************************************************
|
||
* @attention
|
||
*
|
||
* Copyright (c) 2016 STMicroelectronics.
|
||
* All rights reserved.
|
||
*
|
||
* This software is licensed under terms that can be found in the LICENSE file
|
||
* in the root directory of this software component.
|
||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||
*
|
||
******************************************************************************
|
||
@endverbatim
|
||
|
||
@par Example Description
|
||
|
||
Use of the USB host application based on the Mass Storage Class (MSC).
|
||
|
||
This is a typical example on how to use the STM32F105x/107x USB OTG Host peripheral to operate with an USB
|
||
flash disk using the Bulk Only Transfer (BOT) and Small Computer System Interface (SCSI) transparent
|
||
commands combined with a file system FatFs (Middleware component).
|
||
|
||
At the beginning of the main program the HAL_Init() function is called to reset all the peripherals,
|
||
initialize the Flash interface and the systick. The user is provided with the SystemClock_Config()
|
||
function to configure the system clock (SYSCLK) to run at 72 MHz. The Full Speed (FS) USB module uses
|
||
internally a 48-MHz clock, which is generated from an integrated PLL.
|
||
|
||
When the application started, the connected USB flash disk device is detected in MSC mode and gets
|
||
initialized. The STM32 MCU behaves as a MSC Host, it enumerates the device and extracts VID, PID,
|
||
manufacturer name, Serial no and product name information and displays it on the LCD screen.
|
||
This example is based on read/write file and explore the USB flash disk content trough a MSC routine.
|
||
|
||
A menu is displayed and the user can select any operation from the menu using the Joystick buttons:
|
||
- "File Operations" operation writes a small text file (less to 1 KB) on the USB flash disk.
|
||
- "Explorer Disk" operation explores the USB flash disk content and displays it on the LCD screen.
|
||
User has to press the Key button to display the whole USB flash disk content (recursion level 2).
|
||
- "Re-Enumerate" operation performs a new Enumeration of the device.
|
||
|
||
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
|
||
based on variable incremented in SysTick ISR. This implies that if HAL_Delay() is called from
|
||
a peripheral ISR process, then the SysTick interrupt must have higher priority (numerically lower)
|
||
than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
||
To change the SysTick interrupt priority you have to use HAL_NVIC_SetPriority() function.
|
||
|
||
@note The application needs to ensure that the SysTick time base is always set to 1 millisecond
|
||
to have correct HAL operation.
|
||
|
||
For more details about the STM32Cube USB Host library, please refer to UM1720
|
||
"STM32Cube USB Host library".
|
||
|
||
It is possible to fine tune needed USB Host features by modifying defines values in USBH configuration
|
||
file <20>usbh_conf.h<> available under the project includes directory, in a way to fit the application
|
||
requirements, such as:
|
||
- Level of debug: USBH_DEBUG_LEVEL
|
||
0: No debug messages
|
||
1: Only User messages are shown
|
||
2: User and Error messages are shown
|
||
3: All messages and internal debug messages are shown
|
||
By default debug messages are displayed on the debugger IO terminal; to redirect the Library
|
||
messages on the LCD screen, lcd_log.c driver need to be added to the application sources.
|
||
|
||
|
||
@par Directory contents
|
||
|
||
- USB_Host/MSC_Standalone/Src/main.c Main program
|
||
- USB_Host/MSC_Standalone/Src/system_stm32f1xx.c STM32F1xx system clock configuration file
|
||
- USB_Host/MSC_Standalone/Src/stm32f1xx_it.c Interrupt handlers
|
||
- USB_Host/MSC_Standalone/Src/menu.c MSC State Machine
|
||
- USB_Host/MSC_Standalone/Src/usbh_conf.c General low level driver configuration
|
||
- USB_Host/MSC_Standalone/Src/explorer.c Explore the USB flash disk content
|
||
- USB_Host/MSC_Standalone/Src/file_operations.c Write/read file on the disk
|
||
- USB_Host/MSC_Standalone/Src/usbh_diskio.c USB diskio interface for FatFs
|
||
- USB_Host/MSC_Standalone/Inc/main.h Main program header file
|
||
- USB_Host/MSC_Standalone/Inc/stm32f1xx_it.h Interrupt handlers header file
|
||
- USB_Host/MSC_Standalone/Inc/lcd_log_conf.h LCD log configuration file
|
||
- USB_Host/MSC_Standalone/Inc/stm32f1xx_hal_conf.h HAL configuration file
|
||
- USB_Host/MSC_Standalone/Inc/usbh_conf.h USB Host driver Configuration file
|
||
- USB_Host/MSC_Standalone/Inc/ffconf.h FatFs Module Configuration file
|
||
|
||
|
||
@par Hardware and Software environment
|
||
|
||
- This example runs on STM32F107xx/STM32F105xx devices.
|
||
|
||
- This example has been tested with STMicroelectronics STM3210C-EVAL RevC
|
||
evaluation boards and can be easily tailored to any other supported device
|
||
and development board.
|
||
|
||
- STM3210C-EVAL RevC Set-up
|
||
- Plug the USB key into the STM3210C-EVAL board through 'USB micro A-Male
|
||
to A-Female' cable to the connector CN2
|
||
|
||
@par How to use it ?
|
||
|
||
In order to make the program work, you must do the following :
|
||
- Open your preferred toolchain
|
||
- Rebuild all files and load your image into target memory
|
||
- Run the example
|
||
|
||
|
||
*/
|