Update History
V1.7.0
/ 09-October-2018Main
Changes - Update stm32f1xx_hal_conf.h files to add support to HAL CAN Legacy Module.
V1.5.0
/ 14-April-2017Main
Changes - Update stm32f1xx_hal_conf.h file to be aligned with new conf_template.h
- Update HAL examples to use TIM HW as time base source instead of Systick
- Add 2 new HAL TimeBase examples : HAL_TimeBase_RTC_ALARM and HAL_TimeBase_RTC_WKUP
V1.4.0
/ 29-April-2016Main
Changes - Update all the system_stm32f1xx.c with new AHBPrescTable and APBPrescTable.
V1.3.0
/ 18-December-2015Main
Changes
- To
ensure the full compatibility of the GPIO interfaces across all the
STM32 families, the gpio speed definition have been renamed:
- GPIO_SPEED_LOW to GPIO_SPEED_FREQ_LOW
- GPIO_SPEED_MEDIUM to GPIO_SPEED_FREQ_MEDIUM
- GPIO_SPEED_HIGH to GPIO_SPEED_FREQ_HIGH
- aliases are created to keep backward compatibility
- Reduce the default timeout value for the startup of the HSE form 5s to 100ms.
- Update the Keil projects from V4 to V5.
V1.2.0
/ 31-July-2015Main
Changes
- Removing SW4STM32 projects as not supported by SW4STM32.
- SW4STM32 support only STLinkv2 and STLinkv2.1, not STLinkv1.
V1.1.0
/ 05-June-2015Main
Changes
- Add support of System Workbench for STM32 (SW4STM32) toolchain
V1.0.0
/ 16-December-2014
Main
Changes
License
Licensed
under MCD-ST Liberty SW License Agreement V2, (the "License"); You may
not use this package
except in compliance with the License. You may obtain a copy of the
License at:
Unless
required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT
WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See
the License for the specific language governing permissions and
limitations under the License.
For
complete documentation on STM32 Microcontrollers visit www.st.com/STM32
|
