/**
  ******************************************************************************
  * @file    stm3210c_eval.c
  * @author  MCD Application Team
  * @version V6.1.0
  * @date    14-April-2017
  * @brief   This file provides a set of firmware functions to manage Leds, 
  *          push-button and COM ports for STM3210C_EVAL
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */
  
/* Includes ------------------------------------------------------------------*/
#include "stm3210c_eval.h"

/** @addtogroup BSP
  * @{
  */ 

/** @defgroup STM3210C_EVAL STM3210C EVAL
  * @{
  */ 

/** @defgroup STM3210C_EVAL_COMMON STM3210C EVAL Common
  * @{
  */ 

/** @defgroup STM3210C_EVAL_Private_TypesDefinitions STM3210C EVAL Private TypesDefinitions
  * @{
  */ 

typedef struct
{
  __IO uint16_t LCD_REG_R; /* Read Register */
  __IO uint16_t LCD_RAM_R; /* Read RAM */
  __IO uint16_t LCD_REG_W; /* Write Register */
  __IO uint16_t LCD_RAM_W; /* Write RAM */
} TFT_LCD_TypeDef;

/**
  * @}
  */ 

/** @defgroup STM3210C_EVAL_Private_Defines STM3210C EVAL Private Defines
  * @{
  */ 

/* LINK LCD */
#define START_BYTE         0x70
#define SET_INDEX          0x00
#define READ_STATUS        0x01
#define LCD_WRITE_REG      0x02
#define LCD_READ_REG       0x03
  
/* LINK SD Card */
#define SD_DUMMY_BYTE      0xFF    
#define SD_NO_RESPONSE_EXPECTED  0x80

/**
 * @brief STM3210C EVAL BSP Driver version number
   */
#define __STM3210C_EVAL_BSP_VERSION_MAIN       (0x06) /*!< [31:24] main version */
#define __STM3210C_EVAL_BSP_VERSION_SUB1       (0x01) /*!< [23:16] sub1 version */
#define __STM3210C_EVAL_BSP_VERSION_SUB2       (0x00) /*!< [15:8]  sub2 version */
#define __STM3210C_EVAL_BSP_VERSION_RC         (0x00) /*!< [7:0]  release candidate */
#define __STM3210C_EVAL_BSP_VERSION            ((__STM3210C_EVAL_BSP_VERSION_MAIN << 24)\
                                               |(__STM3210C_EVAL_BSP_VERSION_SUB1 << 16)\
                                               |(__STM3210C_EVAL_BSP_VERSION_SUB2 << 8 )\
                                               |(__STM3210C_EVAL_BSP_VERSION_RC))


/* Note: LCD /CS is CE4 - Bank 4 of NOR/SRAM Bank 1~4 */
#define TFT_LCD_BASE           ((uint32_t)(0x60000000 | 0x0C000000))
#define TFT_LCD                ((TFT_LCD_TypeDef *) TFT_LCD_BASE)

/**
  * @}
  */


/** @defgroup STM3210C_EVAL_Private_Variables STM3210C EVAL Private Variables
  * @{
  */ 
/**
 * @brief LED variables
 */
GPIO_TypeDef* LED_PORT[LEDn] = {LED1_GPIO_PORT, 
                                LED2_GPIO_PORT, 
                                LED3_GPIO_PORT,
                                LED4_GPIO_PORT};

const uint16_t LED_PIN[LEDn] = {LED1_PIN, 
                                LED2_PIN, 
                                LED3_PIN,
                                LED4_PIN};

/**
 * @brief BUTTON variables
 */
GPIO_TypeDef* BUTTON_PORT[BUTTONn] = {WAKEUP_BUTTON_GPIO_PORT, 
                                      TAMPER_BUTTON_GPIO_PORT,
                                      KEY_BUTTON_GPIO_PORT}; 

const uint16_t BUTTON_PIN[BUTTONn] = {WAKEUP_BUTTON_PIN, 
                                      TAMPER_BUTTON_PIN,
                                      KEY_BUTTON_PIN}; 
                                             
const uint16_t BUTTON_IRQn[BUTTONn] = {WAKEUP_BUTTON_EXTI_IRQn, 
                                       TAMPER_BUTTON_EXTI_IRQn,
                                       KEY_BUTTON_EXTI_IRQn};


/**
 * @brief COM variables
 */
USART_TypeDef* COM_USART[COMn]   = {EVAL_COM1}; 

GPIO_TypeDef* COM_TX_PORT[COMn]   = {EVAL_COM1_TX_GPIO_PORT};
 
GPIO_TypeDef* COM_RX_PORT[COMn]   = {EVAL_COM1_RX_GPIO_PORT};

const uint16_t COM_TX_PIN[COMn]   = {EVAL_COM1_TX_PIN};

const uint16_t COM_RX_PIN[COMn]   = {EVAL_COM1_RX_PIN};
 
/**
 * @brief BUS variables
 */
#ifdef HAL_SPI_MODULE_ENABLED
uint32_t SpixTimeout = EVAL_SPIx_TIMEOUT_MAX;        /*<! Value of Timeout when SPI communication fails */
static SPI_HandleTypeDef heval_Spi;
#endif /* HAL_SPI_MODULE_ENABLED */

#ifdef HAL_I2C_MODULE_ENABLED
uint32_t I2cxTimeout = EVAL_I2Cx_TIMEOUT_MAX;   /*<! Value of Timeout when I2C communication fails */
I2C_HandleTypeDef heval_I2c;
#endif /* HAL_I2C_MODULE_ENABLED */

/**
  * @}
  */ 

/* I2Cx bus function */
#ifdef HAL_I2C_MODULE_ENABLED
/* Link function for I2C EEPROM peripheral */
static void               I2Cx_Init(void);
static void               I2Cx_ITConfig(void);
static HAL_StatusTypeDef  I2Cx_ReadMultiple(uint8_t Addr, uint16_t Reg, uint16_t MemAddress, uint8_t *Buffer, uint16_t Length);
static HAL_StatusTypeDef  I2Cx_ReadBuffer(uint16_t Addr, uint8_t Reg, uint16_t RegSize, uint8_t *pBuffer, uint16_t Length);
static void               I2Cx_WriteData(uint16_t Addr, uint8_t Reg, uint8_t Value);
static HAL_StatusTypeDef  I2Cx_WriteBuffer(uint16_t Addr, uint8_t Reg, uint16_t RegSize, uint8_t *pBuffer, uint16_t Length);
static uint8_t            I2Cx_ReadData(uint16_t Addr, uint8_t Reg);
static HAL_StatusTypeDef  I2Cx_IsDeviceReady(uint16_t DevAddress, uint32_t Trials);
static void               I2Cx_Error(uint8_t Addr);
static void               I2Cx_MspInit(I2C_HandleTypeDef *hi2c);  

/* Link function for IO Expander over I2C */
void                      IOE_Init(void);
void                      IOE_ITConfig(void);
void                      IOE_Delay(uint32_t Delay);
void                      IOE_Write(uint8_t Addr, uint8_t Reg, uint8_t Value);
uint8_t                   IOE_Read(uint8_t Addr, uint8_t Reg);
uint16_t                  IOE_ReadMultiple(uint8_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length);

/* Link function for EEPROM peripheral over I2C */
void                      EEPROM_I2C_IO_Init(void);
HAL_StatusTypeDef         EEPROM_I2C_IO_WriteData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize);
HAL_StatusTypeDef         EEPROM_I2C_IO_ReadData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize);
HAL_StatusTypeDef         EEPROM_I2C_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials);

/* Link functions for Temperature Sensor peripheral */
void                      TSENSOR_IO_Init(void);
void                      TSENSOR_IO_Write(uint16_t DevAddress, uint8_t* pBuffer, uint8_t WriteAddr, uint16_t Length);
void                      TSENSOR_IO_Read(uint16_t DevAddress, uint8_t* pBuffer, uint8_t ReadAddr, uint16_t Length);
uint16_t                  TSENSOR_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials);

/* Link function for Audio peripheral */
void                      AUDIO_IO_Init(void);
void                      AUDIO_IO_DeInit(void);
void                      AUDIO_IO_Write(uint8_t Addr, uint8_t Reg, uint8_t Value);
uint8_t                   AUDIO_IO_Read(uint8_t Addr, uint8_t Reg);

/* Link function for Accelero peripheral */
void                      ACCELERO_IO_Init(void);
void                      ACCELERO_IO_ITConfig(void);
void                      ACCELERO_IO_Write(uint8_t* pBuffer, uint8_t WriteAddr, uint16_t NumByteToWrite);
void                      ACCELERO_IO_Read(uint8_t* pBuffer, uint8_t ReadAddr, uint16_t NumByteToRead);

#endif /* HAL_I2C_MODULE_ENABLED */

/* SPIx bus function */
#ifdef HAL_SPI_MODULE_ENABLED
static void               SPIx_Init(void);
static void               SPIx_Write(uint8_t Value);
static uint32_t           SPIx_Read(void);
static void               SPIx_WriteReadData(const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLength);
static void               SPIx_WriteData(const uint8_t *Data, uint16_t DataLength);
static void               SPIx_ReadData(const uint8_t *Data, uint16_t DataLength);
static void               SPIx_Error(void);
static void               SPIx_MspInit(void);

/* Link function for LCD peripheral over SPI */
void                      LCD_IO_Init(void);
void                      LCD_IO_WriteMultipleData(uint8_t *pData, uint32_t Size);
void                      LCD_IO_WriteReg(uint8_t Reg);
uint16_t                  LCD_IO_ReadData(uint16_t RegValue);
void                      LCD_Delay (uint32_t delay);

/* Link functions for SD Card peripheral over SPI */
void                      SD_IO_Init(void);
void                      SD_IO_CSState(uint8_t state);
void                      SD_IO_WriteReadData(const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLength);
void                      SD_IO_WriteData(const uint8_t *Data, uint16_t DataLength);
void                      SD_IO_ReadData(const uint8_t *Data, uint16_t DataLength);
uint8_t                   SD_IO_WriteByte(uint8_t Data);
#endif /* HAL_SPI_MODULE_ENABLED */


/** @defgroup STM3210C_EVAL_Exported_Functions STM3210C EVAL Exported Functions
  * @{
  */ 

/**
  * @brief  This method returns the STM3210C EVAL BSP Driver revision
  * @retval version : 0xXYZR (8bits for each decimal, R for RC)
  */
uint32_t BSP_GetVersion(void)
{
  return __STM3210C_EVAL_BSP_VERSION;
}

/**
  * @brief  Configures LED GPIO.
  * @param  Led: Specifies the Led to be configured. 
  *   This parameter can be one of following parameters:
  *     @arg LED1
  *     @arg LED2
  *     @arg LED3
  *     @arg LED4
  */
void BSP_LED_Init(Led_TypeDef Led)
{
  GPIO_InitTypeDef  gpioinitstruct = {0};
  
  /* Enable the GPIO_LED clock */
  LEDx_GPIO_CLK_ENABLE(Led);

  /* Configure the GPIO_LED pin */
  gpioinitstruct.Pin    = LED_PIN[Led];
  gpioinitstruct.Mode   = GPIO_MODE_OUTPUT_PP;
  gpioinitstruct.Pull   = GPIO_NOPULL;
  gpioinitstruct.Speed  = GPIO_SPEED_FREQ_HIGH;

  HAL_GPIO_Init(LED_PORT[Led], &gpioinitstruct);

  HAL_GPIO_WritePin(LED_PORT[Led], LED_PIN[Led], GPIO_PIN_RESET);
}

/**
  * @brief  Turns selected LED On.
  * @param  Led: Specifies the Led to be set on. 
  *   This parameter can be one of following parameters:
  *     @arg LED1
  *     @arg LED2
  *     @arg LED3
  *     @arg LED4
  */
void BSP_LED_On(Led_TypeDef Led)
{
  HAL_GPIO_WritePin(LED_PORT[Led], LED_PIN[Led], GPIO_PIN_SET);
}

/**
  * @brief  Turns selected LED Off.
  * @param  Led: Specifies the Led to be set off. 
  *   This parameter can be one of following parameters:
  *     @arg LED1
  *     @arg LED2
  *     @arg LED3
  *     @arg LED4
  */
void BSP_LED_Off(Led_TypeDef Led)
{
  HAL_GPIO_WritePin(LED_PORT[Led], LED_PIN[Led], GPIO_PIN_RESET);
}

/**
  * @brief  Toggles the selected LED.
  * @param  Led: Specifies the Led to be toggled. 
  *   This parameter can be one of following parameters:
  *     @arg LED1
  *     @arg LED2
  *     @arg LED3
  *     @arg LED4
  * @retval None
  */
void BSP_LED_Toggle(Led_TypeDef Led)
{
  HAL_GPIO_TogglePin(LED_PORT[Led], LED_PIN[Led]);
}

/**
  * @brief  Configures push button GPIO and EXTI Line.
  * @param  Button: Button to be configured.
  *   This parameter can be one of the following values: 
  *     @arg BUTTON_WAKEUP: Wakeup Push Button 
  *     @arg BUTTON_TAMPER: Tamper Push Button 
  *     @arg BUTTON_KEY: Key Push Button 
  * @param  Button_Mode: Button mode requested.
  *   This parameter can be one of the following values:   
  *     @arg BUTTON_MODE_GPIO: Button will be used as simple IO 
  *     @arg BUTTON_MODE_EXTI: Button will be connected to EXTI line
  *                            with interrupt generation capability
  */
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode)
{
  GPIO_InitTypeDef gpioinitstruct = {0};

  /* Enable the corresponding Push Button clock */
  BUTTONx_GPIO_CLK_ENABLE(Button);
  
  /* Configure Push Button pin as input */
  gpioinitstruct.Pin    = BUTTON_PIN[Button];
  gpioinitstruct.Pull   = GPIO_NOPULL;
  gpioinitstruct.Speed  = GPIO_SPEED_FREQ_HIGH;
    
  if (Button_Mode == BUTTON_MODE_GPIO)
  {
    /* Configure Button pin as input */
    gpioinitstruct.Mode = GPIO_MODE_INPUT;
    HAL_GPIO_Init(BUTTON_PORT[Button], &gpioinitstruct);
  }
  else if (Button_Mode == BUTTON_MODE_EXTI)
  {
    if(Button != BUTTON_WAKEUP)
    {
      /* Configure Joystick Button pin as input with External interrupt, falling edge */
      gpioinitstruct.Mode = GPIO_MODE_IT_FALLING;
    }
    else
    { 
      /* Configure Key Push Button pin as input with External interrupt, rising edge */
      gpioinitstruct.Mode = GPIO_MODE_IT_RISING;
    }
    HAL_GPIO_Init(BUTTON_PORT[Button], &gpioinitstruct);

    /* Enable and set Button EXTI Interrupt to the lowest priority */
    HAL_NVIC_SetPriority((IRQn_Type)(BUTTON_IRQn[Button]), 0x0F, 0);
    HAL_NVIC_EnableIRQ((IRQn_Type)(BUTTON_IRQn[Button]));
  }
}

/**
  * @brief  Returns the selected button state.
  * @param  Button: Button to be checked.
  *   This parameter can be one of the following values:
  *     @arg BUTTON_TAMPER: Key/Tamper Push Button 
  * @retval Button state
  */
uint32_t BSP_PB_GetState(Button_TypeDef Button)
{
  return HAL_GPIO_ReadPin(BUTTON_PORT[Button], BUTTON_PIN[Button]);
}

#ifdef HAL_I2C_MODULE_ENABLED
/**
  * @brief  Configures joystick GPIO and EXTI modes.
  * @param  Joy_Mode: Button mode.
  *          This parameter can be one of the following values:
  *            @arg  JOY_MODE_GPIO: Joystick pins will be used as simple IOs
  *            @arg  JOY_MODE_EXTI: Joystick pins will be connected to EXTI line 
  *                                 with interrupt generation capability  
  * @retval IO_OK: if all initializations are OK. Other value if error.
  */
uint8_t BSP_JOY_Init(JOYMode_TypeDef Joy_Mode)
{
  uint8_t ret = 0;
  
  /* Initialize the IO functionalities */
  ret = BSP_IO_Init();
  
  /* Configure joystick pins in IT mode */
  if((ret == IO_OK) && (Joy_Mode == JOY_MODE_EXTI))
  {
    /* Configure joystick pins in IT mode */
    BSP_IO_ConfigPin(JOY_ALL_PINS, IO_MODE_IT_FALLING_EDGE);
  }

  return ret; 
}

/**
  * @brief  Returns the current joystick status.
  * @retval Code of the joystick key pressed
  *          This code can be one of the following values:
  *            @arg  JOY_NONE
  *            @arg  JOY_SEL
  *            @arg  JOY_DOWN
  *            @arg  JOY_LEFT
  *            @arg  JOY_RIGHT
  *            @arg  JOY_UP
  */
JOYState_TypeDef BSP_JOY_GetState(void)
{
  uint32_t tmp = 0;
  
  /* Read the status joystick pins */
  tmp = BSP_IO_ReadPin(JOY_ALL_PINS);
  
  /* Check the pressed keys */  
  if((tmp & JOY_NONE_PIN) == JOY_NONE)
  {
    return(JOYState_TypeDef) JOY_NONE;
  }
  else if(!(tmp & JOY_SEL_PIN))
  {
    return(JOYState_TypeDef) JOY_SEL;
  }
  else if(!(tmp & JOY_DOWN_PIN))
  {
    return(JOYState_TypeDef) JOY_DOWN;
  } 
  else if(!(tmp & JOY_LEFT_PIN))
  {
    return(JOYState_TypeDef) JOY_LEFT;
  }
  else if(!(tmp & JOY_RIGHT_PIN))
  {
    return(JOYState_TypeDef) JOY_RIGHT;
  }
  else if(!(tmp & JOY_UP_PIN))
  {
    return(JOYState_TypeDef) JOY_UP;
  }
  else
  { 
    return(JOYState_TypeDef) JOY_NONE;
  }  
}
#endif /*HAL_I2C_MODULE_ENABLED*/ 

#ifdef HAL_UART_MODULE_ENABLED
/**
  * @brief  Configures COM port.
  * @param  COM: Specifies the COM port to be configured.
  *   This parameter can be one of following parameters:    
  *     @arg COM1
  * @param  huart: pointer to a UART_HandleTypeDef structure that
  *   contains the configuration information for the specified UART peripheral.
  */
void BSP_COM_Init(COM_TypeDef COM, UART_HandleTypeDef* huart)
{
  GPIO_InitTypeDef gpioinitstruct = {0};

  /* Enable GPIO clock */
  COMx_TX_GPIO_CLK_ENABLE(COM);
  COMx_RX_GPIO_CLK_ENABLE(COM);

  /* Enable USART clock */
  COMx_CLK_ENABLE(COM);
  
  /* Remap AFIO if needed */
  AFIOCOMx_CLK_ENABLE(COM);
  AFIOCOMx_REMAP(COM);

  /* Configure USART Tx as alternate function push-pull */
  gpioinitstruct.Pin        = COM_TX_PIN[COM];
  gpioinitstruct.Mode       = GPIO_MODE_AF_PP;
  gpioinitstruct.Speed      = GPIO_SPEED_FREQ_HIGH;
  gpioinitstruct.Pull       = GPIO_PULLUP;
  HAL_GPIO_Init(COM_TX_PORT[COM], &gpioinitstruct);
    
  /* Configure USART Rx as alternate function push-pull */
  gpioinitstruct.Mode       = GPIO_MODE_INPUT;
  gpioinitstruct.Pin        = COM_RX_PIN[COM];
  HAL_GPIO_Init(COM_RX_PORT[COM], &gpioinitstruct);
  
  /* USART configuration */
  huart->Instance = COM_USART[COM];
  HAL_UART_Init(huart);
}
#endif /* HAL_UART_MODULE_ENABLED */

/**
  * @}
  */ 

/** @defgroup STM3210C_EVAL_BusOperations_Functions STM3210C EVAL BusOperations Functions
  * @{
  */ 

/*******************************************************************************
                            BUS OPERATIONS
*******************************************************************************/

#ifdef HAL_I2C_MODULE_ENABLED
/******************************* I2C Routines**********************************/

/**
  * @brief Eval I2Cx MSP Initialization
  * @param hi2c: I2C handle
  */
static void I2Cx_MspInit(I2C_HandleTypeDef *hi2c)
{
  GPIO_InitTypeDef  gpioinitstruct = {0};  

  if (hi2c->Instance == EVAL_I2Cx)
  {
    /*## Configure the GPIOs ################################################*/  

    /* Enable GPIO clock */
    EVAL_I2Cx_SDA_GPIO_CLK_ENABLE();
    EVAL_I2Cx_SCL_GPIO_CLK_ENABLE();
      
    /* Configure I2C Tx as alternate function  */
    gpioinitstruct.Pin       = EVAL_I2Cx_SCL_PIN;
    gpioinitstruct.Mode      = GPIO_MODE_AF_OD;
    gpioinitstruct.Pull      = GPIO_NOPULL;
    gpioinitstruct.Speed     = GPIO_SPEED_FREQ_HIGH;
    HAL_GPIO_Init(EVAL_I2Cx_SCL_GPIO_PORT, &gpioinitstruct);
      
    /* Configure I2C Rx as alternate function  */
    gpioinitstruct.Pin = EVAL_I2Cx_SDA_PIN;
    HAL_GPIO_Init(EVAL_I2Cx_SDA_GPIO_PORT, &gpioinitstruct);
    
    /*## Configure the Eval I2Cx peripheral #######################################*/ 
    /* Enable Eval_I2Cx clock */
    EVAL_I2Cx_CLK_ENABLE();

    /* Add delay related to RCC workaround */
    while (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN) != RCC_APB1ENR_I2C1EN) {};
    
    /* Force the I2C Periheral Clock Reset */  
    EVAL_I2Cx_FORCE_RESET();
      
    /* Release the I2C Periheral Clock Reset */  
    EVAL_I2Cx_RELEASE_RESET(); 
    
    /* Enable and set Eval I2Cx Interrupt to the highest priority */
    HAL_NVIC_SetPriority(EVAL_I2Cx_EV_IRQn, 0xE, 0);
    HAL_NVIC_EnableIRQ(EVAL_I2Cx_EV_IRQn);
    
    /* Enable and set Eval I2Cx Interrupt to the highest priority */
    HAL_NVIC_SetPriority(EVAL_I2Cx_ER_IRQn, 0xE, 0);
    HAL_NVIC_EnableIRQ(EVAL_I2Cx_ER_IRQn);  
  }
}

/**
  * @brief Eval I2Cx Bus initialization
  */
static void I2Cx_Init(void)
{
  if(HAL_I2C_GetState(&heval_I2c) == HAL_I2C_STATE_RESET)
  {
    heval_I2c.Instance              = EVAL_I2Cx;
    heval_I2c.Init.ClockSpeed       = BSP_I2C_SPEED;
    heval_I2c.Init.DutyCycle        = I2C_DUTYCYCLE_2;
    heval_I2c.Init.OwnAddress1      = 0;
    heval_I2c.Init.AddressingMode   = I2C_ADDRESSINGMODE_7BIT;
    heval_I2c.Init.DualAddressMode  = I2C_DUALADDRESS_DISABLE;
    heval_I2c.Init.OwnAddress2      = 0;
    heval_I2c.Init.GeneralCallMode  = I2C_GENERALCALL_DISABLE;
    heval_I2c.Init.NoStretchMode    = I2C_NOSTRETCH_DISABLE;  

    /* Init the I2C */
    I2Cx_MspInit(&heval_I2c);
    HAL_I2C_Init(&heval_I2c);
  }
}

/**
  * @brief  Configures I2C Interrupt.
  */
static void I2Cx_ITConfig(void)
{
  static uint8_t I2C_IT_Enabled = 0;  
  GPIO_InitTypeDef  gpioinitstruct = {0};
  
  if(I2C_IT_Enabled == 0)
  {
    I2C_IT_Enabled = 1;  
    
    /* Enable the GPIO EXTI clock */
    IOE_IT_GPIO_CLK_ENABLE();
    
    gpioinitstruct.Pin   = IOE_IT_PIN;
    gpioinitstruct.Pull  = GPIO_NOPULL;
    gpioinitstruct.Speed = GPIO_SPEED_FREQ_HIGH;
    gpioinitstruct.Mode  = GPIO_MODE_IT_FALLING;
    HAL_GPIO_Init(IOE_IT_GPIO_PORT, &gpioinitstruct);
    
    /* Set priority and Enable GPIO EXTI Interrupt */
    HAL_NVIC_SetPriority((IRQn_Type)(IOE_IT_EXTI_IRQn), 0xE, 0);
    HAL_NVIC_EnableIRQ((IRQn_Type)(IOE_IT_EXTI_IRQn));
  }
}

/**
  * @brief  Reads multiple data.
  * @param  Addr: I2C address
  * @param  Reg: Reg address 
  * @param  MemAddress: Internal memory address
  * @param  Buffer: Pointer to data buffer
  * @param  Length: Length of the data
  * @retval Number of read data
  */
static HAL_StatusTypeDef I2Cx_ReadMultiple(uint8_t Addr, uint16_t Reg, uint16_t MemAddress, uint8_t *Buffer, uint16_t Length)
{
  HAL_StatusTypeDef status = HAL_OK;
  
  status = HAL_I2C_Mem_Read(&heval_I2c, Addr, (uint16_t)Reg, MemAddress, Buffer, Length, I2cxTimeout);
  
  /* Check the communication status */
  if(status != HAL_OK)
  {
    /* I2C error occured */
    I2Cx_Error(Addr);
  }
  return status;    
}

/**
  * @brief  Write a value in a register of the device through BUS.
  * @param  Addr: Device address on BUS Bus.  
  * @param  Reg: The target register address to write
  * @param  Value: The target register value to be written 
  */
static void I2Cx_WriteData(uint16_t Addr, uint8_t Reg, uint8_t Value)
{
  HAL_StatusTypeDef status = HAL_OK;
  
  status = HAL_I2C_Mem_Write(&heval_I2c, Addr, (uint16_t)Reg, I2C_MEMADD_SIZE_8BIT, &Value, 1, I2cxTimeout);
  
  /* Check the communication status */
  if(status != HAL_OK)
  {
    /* Execute user timeout callback */
    I2Cx_Error(Addr);
  }
}

/**
  * @brief  Write a value in a register of the device through BUS.
  * @param  Addr: Device address on BUS Bus.  
  * @param  Reg: The target register address to write
  * @param  RegSize: The target register size (can be 8BIT or 16BIT)
  * @param  pBuffer: The target register value to be written 
  * @param  Length: buffer size to be written
  */
static HAL_StatusTypeDef I2Cx_WriteBuffer(uint16_t Addr, uint8_t Reg, uint16_t RegSize, uint8_t *pBuffer, uint16_t Length)
{
  HAL_StatusTypeDef status = HAL_OK;
  
  status = HAL_I2C_Mem_Write(&heval_I2c, Addr, (uint16_t)Reg, RegSize, pBuffer, Length, I2cxTimeout); 

/* Check the communication status */
  if(status != HAL_OK)
  {
    /* Re-Initiaize the BUS */
    I2Cx_Error(Addr);
  }        
  return status;
}

/**
  * @brief  Read a value in a register of the device through BUS.
  * @param  Addr: Device address on BUS Bus.  
  * @param  Reg: The target register address to write
  * @retval Data read at register @
  */
static uint8_t I2Cx_ReadData(uint16_t Addr, uint8_t Reg)
{
  HAL_StatusTypeDef status = HAL_OK;
  uint8_t value = 0;
  
  status = HAL_I2C_Mem_Read(&heval_I2c, Addr, Reg, I2C_MEMADD_SIZE_8BIT, &value, 1, I2cxTimeout);
 
  /* Check the communication status */
  if(status != HAL_OK)
  {
    /* Execute user timeout callback */
    I2Cx_Error(Addr);
  
  }
  return value;
}

/**
  * @brief  Reads multiple data on the BUS.
  * @param  Addr: I2C Address
  * @param  Reg: Reg Address 
  * @param  RegSize : The target register size (can be 8BIT or 16BIT)
  * @param  pBuffer: pointer to read data buffer
  * @param  Length: length of the data
  * @retval 0 if no problems to read multiple data
  */
static HAL_StatusTypeDef I2Cx_ReadBuffer(uint16_t Addr, uint8_t Reg, uint16_t RegSize, uint8_t *pBuffer, uint16_t Length)
{
  HAL_StatusTypeDef status = HAL_OK;

  status = HAL_I2C_Mem_Read(&heval_I2c, Addr, (uint16_t)Reg, RegSize, pBuffer, Length, I2cxTimeout);
  
  /* Check the communication status */
  if(status != HAL_OK)
  {
    /* Re-Initiaize the BUS */
    I2Cx_Error(Addr);
  }        
  return status;
}

/**
* @brief  Checks if target device is ready for communication. 
* @note   This function is used with Memory devices
* @param  DevAddress: Target device address
* @param  Trials: Number of trials
* @retval HAL status
*/
static HAL_StatusTypeDef I2Cx_IsDeviceReady(uint16_t DevAddress, uint32_t Trials)
{ 
  return (HAL_I2C_IsDeviceReady(&heval_I2c, DevAddress, Trials, I2cxTimeout));
}

/**
  * @brief  Manages error callback by re-initializing I2C.
  * @param  Addr: I2C Address
  */
static void I2Cx_Error(uint8_t Addr)
{
  /* De-initialize the IOE comunication BUS */
  HAL_I2C_DeInit(&heval_I2c);
  
  /* Re-Initiaize the IOE comunication BUS */
  I2Cx_Init();  
}

#endif /* HAL_I2C_MODULE_ENABLED */

/******************************* SPI Routines**********************************/
#ifdef HAL_SPI_MODULE_ENABLED
/**
  * @brief  Initializes SPI MSP.
  */
static void SPIx_MspInit(void)
{
  GPIO_InitTypeDef  gpioinitstruct = {0};
  
  /*** Configure the GPIOs ***/  
  /* Enable GPIO clock */
  EVAL_SPIx_SCK_GPIO_CLK_ENABLE();
  EVAL_SPIx_MISO_MOSI_GPIO_CLK_ENABLE();
  __HAL_RCC_AFIO_CLK_ENABLE();
  __HAL_AFIO_REMAP_SPI3_ENABLE();
  
  /* configure SPI SCK */
  gpioinitstruct.Pin        = EVAL_SPIx_SCK_PIN;
  gpioinitstruct.Mode       = GPIO_MODE_AF_PP;
  gpioinitstruct.Pull       = GPIO_NOPULL;
  gpioinitstruct.Speed      = GPIO_SPEED_FREQ_HIGH;
  HAL_GPIO_Init(EVAL_SPIx_SCK_GPIO_PORT, &gpioinitstruct);

  /* configure SPI MISO and MOSI */
  gpioinitstruct.Pin        = (EVAL_SPIx_MISO_PIN | EVAL_SPIx_MOSI_PIN);
  gpioinitstruct.Mode       = GPIO_MODE_AF_PP;
  gpioinitstruct.Pull       = GPIO_NOPULL;
  gpioinitstruct.Speed      = GPIO_SPEED_FREQ_HIGH;
  HAL_GPIO_Init(EVAL_SPIx_MISO_MOSI_GPIO_PORT, &gpioinitstruct);

  /*** Configure the SPI peripheral ***/ 
  /* Enable SPI clock */
  EVAL_SPIx_CLK_ENABLE();
}

/**
  * @brief  Initializes SPI HAL.
  */
static void SPIx_Init(void)
{
  /* DeInitializes the SPI peripheral */
  heval_Spi.Instance = EVAL_SPIx;
  HAL_SPI_DeInit(&heval_Spi);

  /* SPI Config */
  /* SPI baudrate is set to 9 MHz (PCLK2/SPI_BaudRatePrescaler = 72/8 = 9 MHz) */
  heval_Spi.Init.BaudRatePrescaler  = SPI_BAUDRATEPRESCALER_8;
  heval_Spi.Init.Direction          = SPI_DIRECTION_2LINES;
  heval_Spi.Init.CLKPhase           = SPI_PHASE_2EDGE;
  heval_Spi.Init.CLKPolarity        = SPI_POLARITY_HIGH;
  heval_Spi.Init.CRCCalculation     = SPI_CRCCALCULATION_DISABLE;
  heval_Spi.Init.CRCPolynomial      = 7;
  heval_Spi.Init.DataSize           = SPI_DATASIZE_8BIT;
  heval_Spi.Init.FirstBit           = SPI_FIRSTBIT_MSB;
  heval_Spi.Init.NSS                = SPI_NSS_SOFT;
  heval_Spi.Init.TIMode             = SPI_TIMODE_DISABLE;
  heval_Spi.Init.Mode               = SPI_MODE_MASTER;
  
  SPIx_MspInit();
  if (HAL_SPI_Init(&heval_Spi) != HAL_OK)
  {
    /* Should not occur */
    while(1) {};
  }
}

/**
  * @brief SPI Read 4 bytes from device
  * @retval Read data
*/
static uint32_t SPIx_Read(void)
{
  HAL_StatusTypeDef status = HAL_OK;
  uint32_t          readvalue = 0;
  uint32_t          writevalue = 0xFFFFFFFF;
  
  status = HAL_SPI_TransmitReceive(&heval_Spi, (uint8_t*) &writevalue, (uint8_t*) &readvalue, 1, SpixTimeout);
  
  /* Check the communication status */
  if(status != HAL_OK)
  {
    /* Execute user timeout callback */
    SPIx_Error();
  }

  return readvalue;
}

/**
  * @brief  SPI Write a byte to device
  * @param  DataIn: value to be written
  * @param  DataOut: value to be read
  * @param  DataLength: length of data
  */
static void SPIx_WriteReadData(const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLength)
{
  HAL_StatusTypeDef status = HAL_OK;

  status = HAL_SPI_TransmitReceive(&heval_Spi, (uint8_t*) DataIn, DataOut, DataLength, SpixTimeout);

  /* Check the communication status */
  if(status != HAL_OK)
  {
    /* Execute user timeout callback */
    SPIx_Error();
  }
}

/**
  * @brief  SPI Write Data to device
  * @param  Data: value to be written
  * @param  DataLength: length of data
  */
static void SPIx_WriteData(const uint8_t *Data, uint16_t DataLength)
{
  HAL_StatusTypeDef status = HAL_OK;

  status = HAL_SPI_Transmit(&heval_Spi, (uint8_t*) Data, DataLength, SpixTimeout);

  /* Check the communication status */
  if(status != HAL_OK)
  {
    /* Execute user timeout callback */
    SPIx_Error();
  }
}

/**
  * @brief  SPI Read Data from device
  * @param  Data: value to be read
  * @param  DataLength: length of data
  */
static void SPIx_ReadData(const uint8_t *Data, uint16_t DataLength)
{
  HAL_StatusTypeDef status = HAL_OK;

  status = HAL_SPI_Receive(&heval_Spi, (uint8_t*) Data, DataLength, SpixTimeout);

  /* Check the communication status */
  if(status != HAL_OK)
  {
    /* Execute user timeout callback */
    SPIx_Error();
  }
}

/**
  * @brief  SPI Write a byte to device.
  * @param  Value: value to be written
  */
static void SPIx_Write(uint8_t Value)
{
  HAL_StatusTypeDef status = HAL_OK;
  uint8_t data;

  status = HAL_SPI_TransmitReceive(&heval_Spi, (uint8_t*) &Value, &data, 1, SpixTimeout);
    
  /* Check the communication status */
  if(status != HAL_OK)
  {
    /* Execute user timeout callback */
    SPIx_Error();
  }
}

/**
  * @brief  SPI error treatment function
  * @retval None
  */
static void SPIx_Error (void)
{
  /* De-initialize the SPI communication BUS */
  HAL_SPI_DeInit(&heval_Spi);

  /* Re-Initiaize the SPI communication BUS */
  SPIx_Init();
}
#endif /* HAL_SPI_MODULE_ENABLED */

/**
  * @}
  */ 

/** @defgroup STM3210C_EVAL_LinkOperations_Functions STM3210C EVAL LinkOperations Functions
  * @{
  */ 

/*******************************************************************************
                            LINK OPERATIONS
*******************************************************************************/

#ifdef HAL_I2C_MODULE_ENABLED
/***************************** LINK IOE ***************************************/

/**
  * @brief  Initializes IOE low level.
  */
void IOE_Init(void) 
{
  I2Cx_Init();
}

/**
  * @brief  Configures IOE low level Interrupt.
  */
void IOE_ITConfig(void)
{
  I2Cx_ITConfig();
}

/**
  * @brief  IOE writes single data.
  * @param  Addr: I2C address
  * @param  Reg: Reg address 
  * @param  Value: Data to be written
  */
void IOE_Write(uint8_t Addr, uint8_t Reg, uint8_t Value)
{
  I2Cx_WriteData(Addr, Reg, Value);
}

/**
  * @brief  IOE reads single data.
  * @param  Addr: I2C address
  * @param  Reg: Reg address 
  * @retval Read data
  */
uint8_t IOE_Read(uint8_t Addr, uint8_t Reg)
{
  return I2Cx_ReadData(Addr, Reg);
}

/**
  * @brief  IOE reads multiple data.
  * @param  Addr: I2C address
  * @param  Reg: Reg address 
  * @param  Buffer: Pointer to data buffer
  * @param  Length: Length of the data
  * @retval Number of read data
  */
uint16_t IOE_ReadMultiple(uint8_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length)
{
 return I2Cx_ReadMultiple(Addr, Reg, I2C_MEMADD_SIZE_8BIT, Buffer, Length);
}

/**
  * @brief  IOE delay. 
  * @param  Delay: Delay in ms
  */
void IOE_Delay(uint32_t Delay)
{
  HAL_Delay(Delay);
}

#endif /* HAL_I2C_MODULE_ENABLED */

#ifdef HAL_SPI_MODULE_ENABLED
/********************************* LINK LCD ***********************************/

/**
  * @brief  Configures the LCD_SPI interface.
  */
void LCD_IO_Init(void)
{
  GPIO_InitTypeDef gpioinitstruct;

  /* Configure the LCD Control pins ------------------------------------------*/
  LCD_NCS_GPIO_CLK_ENABLE();
    
  /* Configure NCS in Output Push-Pull mode */
  gpioinitstruct.Pin     = LCD_NCS_PIN;
  gpioinitstruct.Mode    = GPIO_MODE_OUTPUT_PP;
  gpioinitstruct.Pull    = GPIO_NOPULL;
  gpioinitstruct.Speed   = GPIO_SPEED_FREQ_HIGH;
  HAL_GPIO_Init(LCD_NCS_GPIO_PORT, &gpioinitstruct);
    
  /* Set or Reset the control line */
  LCD_CS_LOW();
  LCD_CS_HIGH();

  SPIx_Init();
}

/**
  * @brief  Write register value.
  * @param  pData Pointer on the register value
  * @param  Size Size of byte to transmit to the register
  */
void LCD_IO_WriteMultipleData(uint8_t *pData, uint32_t Size)
{
  uint32_t counter = 0;

  /* Reset LCD control line(/CS) and Send data */  
  LCD_CS_LOW();

  /* Send Start Byte */
  SPIx_Write(START_BYTE | LCD_WRITE_REG);

  for (counter = Size; counter != 0; counter--)
  {
    while(((heval_Spi.Instance->SR) & SPI_FLAG_TXE) != SPI_FLAG_TXE)
    {
    }  
    /* Need to invert bytes for LCD*/
    *((__IO uint8_t*)&heval_Spi.Instance->DR) = *(pData+1);
  
    while(((heval_Spi.Instance->SR) & SPI_FLAG_TXE) != SPI_FLAG_TXE)
    {
    }  
    *((__IO uint8_t*)&heval_Spi.Instance->DR) = *pData;
    counter--;
    pData += 2;
  }

  /* Wait until the bus is ready before releasing Chip select */ 
  while(((heval_Spi.Instance->SR) & SPI_FLAG_BSY) != RESET)
  {
  }  

  /* Reset LCD control line(/CS) and Send data */  
  LCD_CS_HIGH();
}

/**
  * @brief  register address.
  * @param  Reg
  */
void LCD_IO_WriteReg(uint8_t Reg) 
{
  /* Reset LCD control line(/CS) and Send command */
  LCD_CS_LOW();
  
  /* Send Start Byte */
  SPIx_Write(START_BYTE | SET_INDEX);
  
  /* Write 16-bit Reg Index (High Byte is 0) */
  SPIx_Write(0x00);
  SPIx_Write(Reg);
  
  /* Deselect : Chip Select high */
 LCD_CS_HIGH();
}

/**
  * @brief  Read register value.
  * @param  Reg
  */
uint16_t LCD_IO_ReadData(uint16_t Reg) 
{
  uint32_t readvalue = 0;

  /* Send Reg value to Read */
  LCD_IO_WriteReg(Reg);

  /* Reset LCD control line(/CS) and Send command */
  LCD_CS_LOW();
  
  /* Send Start Byte */
  SPIx_Write(START_BYTE | LCD_READ_REG);
  /* Read Upper Byte */
  SPIx_Write(0xFF);
  readvalue = SPIx_Read();
  readvalue = readvalue << 8;
  readvalue |= SPIx_Read();
  
  HAL_Delay(10);

  /* Deselect : Chip Select high */
  LCD_CS_HIGH();
  return readvalue;
}

/**
  * @brief  Wait for loop in ms.
  * @param  Delay in ms.
  * @retval None
  */
void LCD_Delay (uint32_t Delay)
{
  HAL_Delay(Delay);
}

/******************************** LINK SD Card ********************************/

/**
  * @brief  Initializes the SD Card and put it into StandBy State (Ready for 
  *         data transfer).
  */
void SD_IO_Init(void)
{
  GPIO_InitTypeDef  gpioinitstruct;
  uint8_t counter;

  /* SD_CS_GPIO and SD_DETECT_GPIO Periph clock enable */
  SD_CS_GPIO_CLK_ENABLE();
  SD_DETECT_GPIO_CLK_ENABLE();

  /* Configure SD_CS_PIN pin: SD Card CS pin */
  gpioinitstruct.Pin    = SD_CS_PIN;
  gpioinitstruct.Mode   = GPIO_MODE_OUTPUT_PP;
  gpioinitstruct.Pull   = GPIO_PULLUP;
  gpioinitstruct.Speed  = GPIO_SPEED_FREQ_HIGH;
  HAL_GPIO_Init(SD_CS_GPIO_PORT, &gpioinitstruct);

  /* Configure SD_DETECT_PIN pin: SD Card detect pin */
  gpioinitstruct.Pin    = SD_DETECT_PIN;
  gpioinitstruct.Mode   = GPIO_MODE_IT_RISING_FALLING;
  gpioinitstruct.Pull   = GPIO_PULLUP;
  HAL_GPIO_Init(SD_DETECT_GPIO_PORT, &gpioinitstruct);

  /*------------Put SD in SPI mode--------------*/
  /* SD SPI Config */
  SPIx_Init();
  
  /* SD chip select high */
  SD_CS_HIGH();
  
  /* Send dummy byte 0xFF, 10 times with CS high */
  /* Rise CS and MOSI for 80 clocks cycles */
  for (counter = 0; counter <= 9; counter++)
  {
    /* Send dummy byte 0xFF */
    SD_IO_WriteByte(SD_DUMMY_BYTE);
  }
}

/**
  * @brief  Set the SD_CS pin.
  * @param  pin value.
  * @retval None
  */
void SD_IO_CSState(uint8_t val)
{
  if(val == 1) 
  {
    SD_CS_HIGH();
}
  else
  {
    SD_CS_LOW();
  }
}

/**
  * @brief Write a byte on the SD.
  * @param  DataIn: value to be written
  * @param  DataOut: value to be read
  * @param  DataLength: length of data
  */
void SD_IO_WriteReadData(const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLength)
{
  /* Send the byte */
  SPIx_WriteReadData(DataIn, DataOut, DataLength);
}

/**
  * @brief  Write a byte on the SD.
  * @param  Data: value to be written
  * @param  DataLength: length of data
  */
void SD_IO_WriteData(const uint8_t *Data, uint16_t DataLength)
{
  /* Send the byte */
  SPIx_WriteData(Data, DataLength);
}

/**
  * @brief  Read a byte from the SD.
  * @param  Data: value to be read
  * @param  DataLength: length of data
  */
void SD_IO_ReadData(const uint8_t *Data, uint16_t DataLength)
{
  /* Send the byte */
  SPIx_ReadData(Data, DataLength);
}

/**
  * @brief  Writes a byte on the SD.
  * @param  Data: byte to send.
  */
uint8_t SD_IO_WriteByte(uint8_t Data)
{
  uint8_t tmp;
  /* Send the byte */
  SPIx_WriteReadData(&Data,&tmp,1);
  return tmp;
}

#endif /* HAL_SPI_MODULE_ENABLED */

#ifdef HAL_I2C_MODULE_ENABLED
/********************************* LINK I2C EEPROM *****************************/
/**
  * @brief  Initializes peripherals used by the I2C EEPROM driver.
  */
void EEPROM_I2C_IO_Init(void)
{
  I2Cx_Init();
}

/**
  * @brief  Write data to I2C EEPROM driver
  * @param  DevAddress: Target device address
  * @param  MemAddress: Internal memory address
  * @param  pBuffer: Pointer to data buffer
  * @param  BufferSize: Amount of data to be sent
  * @retval HAL status
  */
HAL_StatusTypeDef EEPROM_I2C_IO_WriteData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize)
{
  return (I2Cx_WriteBuffer(DevAddress, MemAddress, I2C_MEMADD_SIZE_16BIT, pBuffer, BufferSize));
}

/**
  * @brief  Read data from I2C EEPROM driver
  * @param  DevAddress: Target device address
  * @param  MemAddress: Internal memory address
  * @param  pBuffer: Pointer to data buffer
  * @param  BufferSize: Amount of data to be read
  * @retval HAL status
  */
HAL_StatusTypeDef EEPROM_I2C_IO_ReadData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize)
{
  return (I2Cx_ReadBuffer(DevAddress, MemAddress, I2C_MEMADD_SIZE_16BIT, pBuffer, BufferSize));
}

/**
* @brief  Checks if target device is ready for communication. 
* @note   This function is used with Memory devices
* @param  DevAddress: Target device address
* @param  Trials: Number of trials
* @retval HAL status
*/
HAL_StatusTypeDef EEPROM_I2C_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials)
{ 
  return (I2Cx_IsDeviceReady(DevAddress, Trials));
}

/********************************* LINK I2C TEMPERATURE SENSOR *****************************/
/**
  * @brief  Initializes peripherals used by the I2C Temperature Sensor driver.
  * @retval None
  */
void TSENSOR_IO_Init(void)
{
  I2Cx_Init();
}

/**
  * @brief  Writes one byte to the TSENSOR.
  * @param  DevAddress: Target device address
  * @param  pBuffer: Pointer to data buffer
  * @param  WriteAddr: TSENSOR's internal address to write to.
  * @param  Length: Number of data to write
  */
void TSENSOR_IO_Write(uint16_t DevAddress, uint8_t* pBuffer, uint8_t WriteAddr, uint16_t Length)
{
  I2Cx_WriteBuffer(DevAddress, WriteAddr, I2C_MEMADD_SIZE_8BIT, pBuffer, Length);
}

/**
  * @brief  Reads one byte from the TSENSOR.
  * @param  DevAddress: Target device address
  * @param  pBuffer : pointer to the buffer that receives the data read from the TSENSOR.
  * @param  ReadAddr : TSENSOR's internal address to read from.
  * @param  Length: Number of data to read
  */
void TSENSOR_IO_Read(uint16_t DevAddress, uint8_t* pBuffer, uint8_t ReadAddr, uint16_t Length)
{
  I2Cx_ReadBuffer(DevAddress, ReadAddr, I2C_MEMADD_SIZE_8BIT, pBuffer, Length);
}

/**
* @brief  Checks if Temperature Sensor is ready for communication. 
  * @param  DevAddress: Target device address
  * @param  Trials: Number of trials
* @retval HAL status
*/
uint16_t TSENSOR_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials)
{ 
  return (I2Cx_IsDeviceReady(DevAddress, Trials));
}

/***************************** LINK ACCELERO *****************************/
/**
  * @brief  Configures ACCELEROMETER SPI interface.
  */
void ACCELERO_IO_Init(void)
{
  /* Initialize the IO functionalities */
  BSP_IO_Init();
}


/**
  * @brief     Configures ACCELERO INT2 config.
                   EXTI0 is already used by user button so INT1 is configured here
  */
void ACCELERO_IO_ITConfig(void)
{
  BSP_IO_ConfigPin(MEMS_ALL_PINS, IO_MODE_IT_FALLING_EDGE);
}

/**
  * @brief  Writes one byte to the ACCELEROMETER.
  * @param  pBuffer : pointer to the buffer  containing the data to be written to the ACCELEROMETER.
  * @param  WriteAddr : ACCELEROMETER's internal address to write to.
  * @param  NumByteToWrite: Number of bytes to write.
  */
void ACCELERO_IO_Write(uint8_t* pBuffer, uint8_t WriteAddr, uint16_t NumByteToWrite)
{
  I2Cx_WriteBuffer(L1S302DL_I2C_ADDRESS, WriteAddr, I2C_MEMADD_SIZE_8BIT, pBuffer, NumByteToWrite);
}

/**
  * @brief  Reads a block of data from the ACCELEROMETER.
  * @param  pBuffer : pointer to the buffer that receives the data read from the ACCELEROMETER.
  * @param  ReadAddr : ACCELEROMETER's internal address to read from.
  * @param  NumByteToRead : number of bytes to read from the ACCELEROMETER.
  */
void ACCELERO_IO_Read(uint8_t* pBuffer, uint8_t ReadAddr, uint16_t NumByteToRead)
{  
  I2Cx_ReadBuffer(L1S302DL_I2C_ADDRESS, ReadAddr, I2C_MEMADD_SIZE_8BIT, pBuffer, NumByteToRead);
}

/********************************* LINK AUDIO ***********************************/

/**
  * @brief  Initializes Audio low level.
  */
void AUDIO_IO_Init(void) 
{
  /* Initialize the IO functionalities */
  BSP_IO_Init();
  
  BSP_IO_ConfigPin(AUDIO_RESET_PIN, IO_MODE_OUTPUT);
  
  /* Power Down the codec */
  BSP_IO_WritePin(AUDIO_RESET_PIN, GPIO_PIN_RESET);
  
  /* wait for a delay to insure registers erasing */
  HAL_Delay(5); 

  /* Power on the codec */
  BSP_IO_WritePin(AUDIO_RESET_PIN, GPIO_PIN_SET);
  
  /* wait for a delay to insure registers erasing */
  HAL_Delay(5);
}

/**
  * @brief  DeInitializes Audio low level.
  * @note   This function is intentionally kept empty, user should define it.
  */
void AUDIO_IO_DeInit(void)
{
  
}

/**
  * @brief  Writes a single data.
  * @param  Addr: I2C address
  * @param  Reg: Reg address 
  * @param  Value: Data to be written
  */
void AUDIO_IO_Write (uint8_t Addr, uint8_t Reg, uint8_t Value)
{
  I2Cx_WriteData(Addr, Reg, Value);
}

/**
  * @brief  Reads a single data.
  * @param  Addr: I2C address
  * @param  Reg: Reg address 
  * @retval Data to be read
  */
uint8_t AUDIO_IO_Read (uint8_t Addr, uint8_t Reg)
{
  return I2Cx_ReadData(Addr, Reg);
}

#endif /* HAL_I2C_MODULE_ENABLED */

/**
  * @}
  */ 

/**
  * @}
  */

/**
  * @}
  */    
  
/**
  * @}
  */    
  
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/