/** ****************************************************************************** * @file stm3210c_eval.h * @author MCD Application Team * @version V6.1.0 * @date 14-April-2017 * @brief This file contains definitions for STM3210C_EVAL's LEDs, * push-buttons and COM ports hardware resources. ****************************************************************************** * @attention * *

© COPYRIGHT(c) 2016 STMicroelectronics

* * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /** @addtogroup BSP * @{ */ /** @addtogroup STM3210C_EVAL * @{ */ /** @addtogroup STM3210C_EVAL_COMMON * @{ */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM3210C_EVAL_H #define __STM3210C_EVAL_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f1xx_hal.h" #ifdef HAL_I2C_MODULE_ENABLED #include "stm3210c_eval_io.h" #endif /* HAL_I2C_MODULE_ENABLED */ /** @defgroup STM3210C_EVAL_Exported_Types STM3210C EVAL Exported Types * @{ */ /** * @brief LED Types Definition */ typedef enum { LED1 = 0, LED2 = 1, LED3 = 2, LED4 = 3, LED_GREEN = LED1, LED_ORANGE = LED2, LED_RED = LED3, LED_BLUE = LED4 } Led_TypeDef; /** * @brief BUTTON Types Definition */ typedef enum { BUTTON_WAKEUP = 0, BUTTON_TAMPER = 1, BUTTON_KEY = 2, } Button_TypeDef; typedef enum { BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1 } ButtonMode_TypeDef; /** * @brief JOYSTICK Types Definition */ typedef enum { JOY_SEL = 0, JOY_LEFT = 1, JOY_RIGHT = 2, JOY_DOWN = 3, JOY_UP = 4, JOY_NONE = 5 }JOYState_TypeDef; typedef enum { JOY_MODE_GPIO = 0, JOY_MODE_EXTI = 1 }JOYMode_TypeDef; /** * @brief COM Types Definition */ typedef enum { COM1 = 0, COM2 = 1 } COM_TypeDef; /** * @} */ /** @defgroup STM3210C_EVAL_Exported_Constants STM3210C EVAL Exported Constants * @{ */ /** * @brief Define for STM3210C_EVAL board */ #if !defined (USE_STM3210C_EVAL) #define USE_STM3210C_EVAL #endif /** @addtogroup STM3210C_EVAL_LED STM3210C EVAL LED * @{ */ #define LEDn 4 #define LED1_PIN GPIO_PIN_7 /* PD.07*/ #define LED1_GPIO_PORT GPIOD #define LED1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() #define LED1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() #define LED2_PIN GPIO_PIN_13 /* PD.13*/ #define LED2_GPIO_PORT GPIOD #define LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() #define LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() #define LED3_PIN GPIO_PIN_3 /* PD.03*/ #define LED3_GPIO_PORT GPIOD #define LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() #define LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() #define LED4_PIN GPIO_PIN_4 /* PD.04*/ #define LED4_GPIO_PORT GPIOD #define LED4_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() #define LED4_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() #define LEDx_GPIO_CLK_ENABLE(__LED__) do { if ((__LED__) == LED1) LED1_GPIO_CLK_ENABLE(); else \ if ((__LED__) == LED2) LED2_GPIO_CLK_ENABLE(); else \ if ((__LED__) == LED3) LED3_GPIO_CLK_ENABLE(); else \ if ((__LED__) == LED4) LED4_GPIO_CLK_ENABLE();} while(0) #define LEDx_GPIO_CLK_DISABLE(__LED__) (((__LED__) == LED1) ? LED1_GPIO_CLK_DISABLE() :\ ((__LED__) == LED2) ? LED2_GPIO_CLK_DISABLE() :\ ((__LED__) == LED3) ? LED3_GPIO_CLK_DISABLE() :\ ((__LED__) == LED4) ? LED4_GPIO_CLK_DISABLE() : 0 ) /** * @} */ /** @addtogroup STM3210C_EVAL_BUTTON STM3210C EVAL BUTTON * @{ */ #define BUTTONn 3 /** * @brief Tamper push-button */ #define TAMPER_BUTTON_PIN GPIO_PIN_13 /* PC.13*/ #define TAMPER_BUTTON_GPIO_PORT GPIOC #define TAMPER_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() #define TAMPER_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() #define TAMPER_BUTTON_EXTI_IRQn EXTI15_10_IRQn /** * @brief Key push-button */ #define KEY_BUTTON_PIN GPIO_PIN_9 /* PB.09*/ #define KEY_BUTTON_GPIO_PORT GPIOB #define KEY_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() #define KEY_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() #define KEY_BUTTON_EXTI_IRQn EXTI9_5_IRQn /** * @brief Wake-up push-button */ #define WAKEUP_BUTTON_PIN GPIO_PIN_0 /* PA.00*/ #define WAKEUP_BUTTON_GPIO_PORT GPIOA #define WAKEUP_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() #define WAKEUP_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() #define WAKEUP_BUTTON_EXTI_IRQn EXTI0_IRQn #define BUTTONx_GPIO_CLK_ENABLE(__BUTTON__) do { if ((__BUTTON__) == BUTTON_TAMPER) TAMPER_BUTTON_GPIO_CLK_ENABLE() ; else \ if ((__BUTTON__) == BUTTON_KEY) KEY_BUTTON_GPIO_CLK_ENABLE() ; else \ if ((__BUTTON__) == BUTTON_WAKEUP) WAKEUP_BUTTON_GPIO_CLK_ENABLE();} while(0) #define BUTTONx_GPIO_CLK_DISABLE(__BUTTON__) (((__BUTTON__) == BUTTON_TAMPER) TAMPER_BUTTON_GPIO_CLK_DISABLE() :\ ((__BUTTON__) == BUTTON_KEY) KEY_BUTTON_GPIO_CLK_DISABLE() :\ ((__BUTTON__) == BUTTON_WAKEUP) WAKEUP_BUTTON_GPIO_CLK_DISABLE() : 0 ) /** * @brief IO Pins definition */ /* Joystick */ #define JOY_SEL_PIN (IO2_PIN_7) /* IO_Expander_2 */ #define JOY_DOWN_PIN (IO2_PIN_6) /* IO_Expander_2 */ #define JOY_LEFT_PIN (IO2_PIN_5) /* IO_Expander_2 */ #define JOY_RIGHT_PIN (IO2_PIN_4) /* IO_Expander_2 */ #define JOY_UP_PIN (IO2_PIN_3) /* IO_Expander_2 */ #define JOY_NONE_PIN JOY_ALL_PINS #define JOY_ALL_PINS (JOY_SEL_PIN | JOY_DOWN_PIN | JOY_LEFT_PIN | JOY_RIGHT_PIN | JOY_UP_PIN) /* MEMS */ #define MEMS_INT1_PIN (IO1_PIN_3) /* IO_Expander_1 */ /* Input */ #define MEMS_INT2_PIN (IO1_PIN_2) /* IO_Expander_1 */ /* Input */ #define MEMS_ALL_PINS (MEMS_INT1_PIN | MEMS_INT2_PIN) #define AUDIO_RESET_PIN (IO2_PIN_2) /* IO_Expander_2 */ /* Output */ #define MII_INT_PIN (IO2_PIN_0) /* IO_Expander_2 */ /* Output */ #define VBAT_DIV_PIN (IO1_PIN_0) /* IO_Expander_1 */ /* Output */ /** * @} */ /** @addtogroup STM3210C_EVAL_COM STM3210C EVAL COM * @{ */ #define COMn 1 /** * @brief Definition for COM port1, connected to USART2 */ #define EVAL_COM1 USART2 #define EVAL_COM1_CLK_ENABLE() __HAL_RCC_USART2_CLK_ENABLE() #define EVAL_COM1_CLK_DISABLE() __HAL_RCC_USART2_CLK_DISABLE() #define AFIOCOM1_CLK_ENABLE() __HAL_RCC_AFIO_CLK_ENABLE() #define AFIOCOM1_CLK_DISABLE() __HAL_RCC_AFIO_CLK_DISABLE() #define EVAL_COM1_TX_PIN GPIO_PIN_5 /* PD.05*/ #define EVAL_COM1_TX_GPIO_PORT GPIOD #define EVAL_COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() #define EVAL_COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() #define EVAL_COM1_RX_PIN GPIO_PIN_6 /* PD.06*/ #define EVAL_COM1_RX_GPIO_PORT GPIOD #define EVAL_COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() #define EVAL_COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() #define EVAL_COM1_IRQn USART2_IRQn #define COMx_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) EVAL_COM1_CLK_ENABLE();} while(0) #define COMx_CLK_DISABLE(__INDEX__) (((__INDEX__) == COM1) ? EVAL_COM1_CLK_DISABLE() : 0) #define AFIOCOMx_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) AFIOCOM1_CLK_ENABLE();} while(0) #define AFIOCOMx_CLK_DISABLE(__INDEX__) (((__INDEX__) == COM1) ? AFIOCOM1_CLK_DISABLE() : 0) #define AFIOCOMx_REMAP(__INDEX__) (((__INDEX__) == COM1) ? (AFIO->MAPR |= (AFIO_MAPR_USART2_REMAP)) : 0) #define COMx_TX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) EVAL_COM1_TX_GPIO_CLK_ENABLE();} while(0) #define COMx_TX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == COM1) ? EVAL_COM1_TX_GPIO_CLK_DISABLE() : 0) #define COMx_RX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) EVAL_COM1_RX_GPIO_CLK_ENABLE();} while(0) #define COMx_RX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == COM1) ? EVAL_COM1_RX_GPIO_CLK_DISABLE() : 0) /** * @} */ /** @addtogroup STM3210C_EVAL_BUS STM3210C EVAL BUS * @{ */ /** * @brief IO Expander Interrupt line on EXTI */ #define IOE_IT_PIN GPIO_PIN_14 #define IOE_IT_GPIO_PORT GPIOB #define IOE_IT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() #define IOE_IT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() #define IOE_IT_EXTI_IRQn EXTI15_10_IRQn #define IOE_IT_EXTI_IRQHANDLER EXTI15_10_IRQHandler /* Exported constant IO ------------------------------------------------------*/ #define IO1_I2C_ADDRESS 0x82 #define IO2_I2C_ADDRESS 0x88 #define TS_I2C_ADDRESS 0x82 /*The Slave ADdress (SAD) associated to the LIS302DL is 001110xb. SDO pad can be used to modify less significant bit of the device address. If SDO pad is connected to voltage supply LSb is ‘1’ (address 0011101b) else if SDO pad is connected to ground LSb value is ‘0’ (address 0011100b).*/ #define L1S302DL_I2C_ADDRESS 0x38 /*##################### ACCELEROMETER ##########################*/ /* Read/Write command */ #define READWRITE_CMD ((uint8_t)0x80) /* Multiple byte read/write command */ #define MULTIPLEBYTE_CMD ((uint8_t)0x40) /*##################### I2Cx ###################################*/ /* User can use this section to tailor I2Cx instance used and associated resources */ /* Definition for I2Cx Pins */ #define EVAL_I2Cx_SCL_PIN GPIO_PIN_6 /* PB.06*/ #define EVAL_I2Cx_SCL_GPIO_PORT GPIOB #define EVAL_I2Cx_SDA_PIN GPIO_PIN_7 /* PB.07*/ #define EVAL_I2Cx_SDA_GPIO_PORT GPIOB /* Definition for I2Cx clock resources */ #define EVAL_I2Cx I2C1 #define EVAL_I2Cx_CLK_ENABLE() __HAL_RCC_I2C1_CLK_ENABLE() #define EVAL_I2Cx_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() #define EVAL_I2Cx_SCL_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() #define EVAL_I2Cx_FORCE_RESET() __HAL_RCC_I2C1_FORCE_RESET() #define EVAL_I2Cx_RELEASE_RESET() __HAL_RCC_I2C1_RELEASE_RESET() /* Definition for I2Cx's NVIC */ #define EVAL_I2Cx_EV_IRQn I2C1_EV_IRQn #define EVAL_I2Cx_EV_IRQHandler I2C1_EV_IRQHandler #define EVAL_I2Cx_ER_IRQn I2C1_ER_IRQn #define EVAL_I2Cx_ER_IRQHandler I2C1_ER_IRQHandler /* I2C clock speed configuration (in Hz) */ #ifndef BSP_I2C_SPEED #define BSP_I2C_SPEED 400000 #endif /* I2C_SPEED */ /* Maximum Timeout values for flags waiting loops. These timeouts are not based on accurate values, they just guarantee that the application will not remain stuck if the I2C communication is corrupted. You may modify these timeout values depending on CPU frequency and application conditions (interrupts routines ...). */ #define EVAL_I2Cx_TIMEOUT_MAX 3000 /*##################### SPI3 ###################################*/ #define EVAL_SPIx SPI3 #define EVAL_SPIx_CLK_ENABLE() __HAL_RCC_SPI3_CLK_ENABLE() #define EVAL_SPIx_SCK_GPIO_PORT GPIOC /* PC.10*/ #define EVAL_SPIx_SCK_PIN GPIO_PIN_10 #define EVAL_SPIx_SCK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() #define EVAL_SPIx_SCK_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() #define EVAL_SPIx_MISO_MOSI_GPIO_PORT GPIOC #define EVAL_SPIx_MISO_MOSI_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() #define EVAL_SPIx_MISO_MOSI_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() #define EVAL_SPIx_MISO_PIN GPIO_PIN_11 /* PC.11*/ #define EVAL_SPIx_MOSI_PIN GPIO_PIN_12 /* PC.12*/ /* Maximum Timeout values for flags waiting loops. These timeouts are not based on accurate values, they just guarantee that the application will not remain stuck if the SPI communication is corrupted. You may modify these timeout values depending on CPU frequency and application conditions (interrupts routines ...). */ #define EVAL_SPIx_TIMEOUT_MAX 1000 /** * @} */ /** @addtogroup STM3210C_EVAL_COMPONENT STM3210C EVAL COMPONENT * @{ */ /*##################### LCD ###################################*/ /* Chip Select macro definition */ #define LCD_CS_LOW() HAL_GPIO_WritePin(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, GPIO_PIN_RESET) #define LCD_CS_HIGH() HAL_GPIO_WritePin(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, GPIO_PIN_SET) /** * @brief LCD Control Interface pins */ #define LCD_NCS_PIN GPIO_PIN_2 /* PB.02*/ #define LCD_NCS_GPIO_PORT GPIOB #define LCD_NCS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() #define LCD_NCS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() /*##################### SD ###################################*/ /* Chip Select macro definition */ #define SD_CS_LOW() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_RESET) #define SD_CS_HIGH() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_SET) /** * @brief SD Control Interface pins */ #define SD_CS_PIN GPIO_PIN_4 /* PA.04*/ #define SD_CS_GPIO_PORT GPIOA #define SD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() #define SD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() /** * @brief SD Detect Interface pins */ #define SD_DETECT_PIN GPIO_PIN_0 #define SD_DETECT_GPIO_PORT GPIOE #define SD_DETECT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE() #define SD_DETECT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE() #define SD_DETECT_EXTI_IRQn EXTI0_IRQn /*##################### AUDIO ##########################*/ /** * @brief AUDIO I2C Interface pins */ #define AUDIO_I2C_ADDRESS 0x94 /** * @} */ /** * @} */ /** @addtogroup STM3210C_EVAL_Exported_Functions * @{ */ uint32_t BSP_GetVersion(void); void BSP_LED_Init(Led_TypeDef Led); void BSP_LED_On(Led_TypeDef Led); void BSP_LED_Off(Led_TypeDef Led); void BSP_LED_Toggle(Led_TypeDef Led); void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode); uint32_t BSP_PB_GetState(Button_TypeDef Button); #ifdef HAL_UART_MODULE_ENABLED void BSP_COM_Init(COM_TypeDef COM, UART_HandleTypeDef* huart); #endif /* HAL_UART_MODULE_ENABLED */ #ifdef HAL_I2C_MODULE_ENABLED uint8_t BSP_JOY_Init(JOYMode_TypeDef Joy_Mode); JOYState_TypeDef BSP_JOY_GetState(void); #endif /* HAL_I2C_MODULE_ENABLED */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM3210C_EVAL_H */ /** * @} */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/