diff --git a/CONTRIBUTING.md b/CONTRIBUTING.md index bd30d09..8668d97 100644 --- a/CONTRIBUTING.md +++ b/CONTRIBUTING.md @@ -1,33 +1,40 @@ -## Contributing guide -This document serves as a checklist before contributing to this repository. -It includes links to read up on if topics are unclear to you. +# Contributing guide -This guide mainly focuses on the proper use of Git. +This guide serves as a checklist before contributing to this repository. It mainly focuses on the steps to follow to submit an issue or a pull-request. -### 1. Before opening an issue -To report a bug/request please file an issue in the right repository (example for [STM32CubeF1](https://github.com/STMicroelectronics/STM32CubeF1/issues/new/choose)). +## 1. Issues -Please check the following boxes before posting an issue: -- [ ] `Make sure you are using the latest commit (major releases are Tagged, but corrections are available as new commits).` -- [ ] `Make sure your issue is a question/feedback/suggestions RELATED TO the software provided in this repository.` Otherwise, it should be discussed on the [ST Community/STM32 MCUs forum](https://community.st.com/s/group/0F90X000000AXsASAW/stm32-mcus). -- [ ] `Make sure your issue is not already reported/fixed on GitHub or discussed on a previous issue.` Please refer to this [dashboard](https://github.com/orgs/STMicroelectronics/projects/2) for the list of issues and pull-requests. Do not forget to browse into the **closed** issues. +### 1.1 Before opening an issue -### 2. Posting the issue -When you have checked the previous boxes. You will find two templates (Bug Report or Other Issue) available in the **Issues** tab of the repository. +Please check the following points before posting an issue: +* Make sure you are using the latest commit (major releases are tagged, but corrections are available as new commits). +* Make sure your issue is a question/feedback/suggestions **related to** the software provided in this repository. Otherwise, please refer to section [3](CONTRIBUTING.md#3-support-requests-and-questions) below. +* Make sure your issue is not already reported/fixed on GitHub or discussed on a previous issue. Do not forget to browse into the **closed** issues. + +### 1.2 Posting the issue + +When you have checked the previous points, create a new report from the **Issues** tab of this repository. A template is available [here](../../issues/new/choose) to help you report the issue you are facing or the enhancement you would like to propose. + +## 2. Pull Requests + +### 2.1 Before opening a pull-request -### 3. Pull Requests STMicrolectronics is happy to receive contributions from the community, based on an initial Contributor License Agreement (CLA) procedure. -* If you are an individual writing original source code and you are sure **you own the intellectual property**, then you need to sign an Individual CLA (https://cla.st.com). -* If you work for a company that wants also to allow you to contribute with your work, your company needs to provide a Corporate CLA (https://cla.st.com) mentioning your GitHub account name. -* If you are not sure that a CLA (Individual or Corporate) has been signed for your GitHub account you can check here (https://cla.st.com). +* If you are an individual writing original source code and you are sure **you own the intellectual property**, then you need to sign an Individual [CLA](https://cla.st.com). +* If you work for a company that wants also to allow you to contribute with your work, your company needs to provide a Corporate [CLA](https://cla.st.com) mentioning your GitHub account name. +* If you are not sure that a CLA (Individual or Corporate) has been signed for your GitHub account you can check the [CLA](https://cla.st.com) dedicated page. Please note that: * The Corporate CLA will always take precedence over the Individual CLA. * One CLA submission is sufficient, for any project proposed by STMicroelectronics. -#### How to proceed +### 2.2 How to proceed -* We recommend to engage first a communication thru an issue, in order to present your proposal. Just to confirm that it corresponds to STMicroelectronics domain or scope. +* We recommend to engage first a communication thru an issue, in order to present your proposal, just to confirm that it corresponds to STMicroelectronics' domain or scope. * Then fork the project to your GitHub account to further develop your contribution. Please use the latest commit version. -* Please, submit one Pull Request for one new feature or proposal. This will ease the analysis and the final merge if accepted. +* Please, submit one pull-request per new feature or proposal. This will ease the analysis and the final merge if accepted. + +## 3. Support requests and questions + +For support requests or any other question related to the product, the tools, the environment, you can submit a post to the **ST Community** on the appropriate topic [page](https://community.st.com/s/topiccatalog). diff --git a/Middlewares/ST/STemWin/README.md b/Middlewares/ST/STemWin/README.md new file mode 100644 index 0000000..cf75c3a --- /dev/null +++ b/Middlewares/ST/STemWin/README.md @@ -0,0 +1,3 @@ +# This middleware library is unavailable in this repository + +In this repository, this middleware library **along with** the projects (demos, applications, and examples) using it, are **not available**. Please refer to the [README.md](../../../README.md#some-middleware-libraries-are-unavailable-in-this-repository) file at the root of this repository for further details. diff --git a/Middlewares/ST/STemWin/readme.txt b/Middlewares/ST/STemWin/readme.txt deleted file mode 100644 index 1809b69..0000000 --- a/Middlewares/ST/STemWin/readme.txt +++ /dev/null @@ -1,34 +0,0 @@ -/** - ****************************************************************************** - * @file readme.txt - * @author MCD Application Team - * @brief Licensed module readme file. - ****************************************************************************** - */ - -This module is not directly available on GitHub as it is subject to a restrictive license (ST Ultimate Liberty). - -CAUTION: Some steps described below (e.g. license display, download start) may - take a few to several seconds depending on the browser used. - -Please follow the steps below in order to obtain it: -1. Click on the link below to be redirected to the MW web page on ST servers. - https://www.st.com/en/licensed-software/stemwin-mw.html?softwareProduct=STemWIN-MW&softwareVersion=5.44.30 -2. The terms of the license shall be displayed on your screen (this may take a few seconds). - Once you have read them carefully and accepted them click on the "ACCEPT" button. -3. You will be then prompted to login/register or to provide your name and e-mail. - Note 1: This step is necessary only in case you logged out from "st.com" - website for more than 24 hours. - Otherwise this step will be automatically skipped. - Note 2: In case you have no "st.com" account and decide to register you will - be prompted for a full registration. - The next times however you can login simply by providing your e-mail - address and password. - Note 3: The other alternative as mentioned above is to provide your name and - e-mail and click on the "Download" button (on bottom of the displayed - dialog box). In this case, you will receive an e-mail asking you for - confirmation. -4. Your download shall start automatically (this may take a few seconds) or an - "Open/Save" dialog box will be opened depending on the browser used. - The module will be downloaded in the form of a compressed file. - Extract its content and place it under the same folder as this readme.txt file. diff --git a/Projects/README.md b/Projects/README.md new file mode 100644 index 0000000..9d3a369 --- /dev/null +++ b/Projects/README.md @@ -0,0 +1,3 @@ +# Some projects are unavailable in this repository + +In this repository, some middleware libraries **along with** the projects (demos, applications, and examples) using them, are **not available**. Please refer to the [README.md](../README.md#some-middleware-libraries-are-unavailable-in-this-repository) file at the root of this repository for further details. diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.ewd b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.ewd deleted file mode 100644 index 72cf859..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.ewd +++ /dev/null @@ -1,1419 +0,0 @@ - - - 3 - - STM3210C_EVAL - - ARM - - 1 - - C-SPY - 2 - - 29 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ARMSIM_ID - 2 - - 1 - 1 - 1 - - - - - - - - CADI_ID - 2 - - 0 - 1 - 1 - - - - - - - - - CMSISDAP_ID - 2 - - 4 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GDBSERVER_ID - 2 - - 0 - 1 - 1 - - - - - - - - - - - IJET_ID - 2 - - 8 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - JLINK_ID - 2 - - 16 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - LMIFTDI_ID - 2 - - 2 - 1 - 1 - - - - - - - - - - PEMICRO_ID - 2 - - 3 - 1 - 1 - - - - - - - - STLINK_ID - 2 - - 4 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - THIRDPARTY_ID - 2 - - 0 - 1 - 1 - - - - - - - - TIFET_ID - 2 - - 1 - 1 - 1 - - - - - - - - - - - - - - - - - - - XDS100_ID - 2 - - 6 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin - 0 - - - $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin - 1 - - - $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin - 0 - - - $EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin - 0 - - - $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin - 0 - - - - diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.ewp b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.ewp deleted file mode 100644 index f9999d8..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.ewp +++ /dev/null @@ -1,1144 +0,0 @@ - - - 3 - - STM3210C_EVAL - - ARM - - 1 - - General - 3 - - 30 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ICCARM - 2 - - 34 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AARM - 2 - - 10 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - OBJCOPY - 0 - - 1 - 1 - 1 - - - - - - - - - CUSTOM - 3 - - - - 0 - - - - BICOMP - 0 - - - - BUILDACTION - 1 - - - - - - - ILINK - 0 - - 20 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IARCHIVE - 0 - - 0 - 1 - 1 - - - - - - - BILINK - 0 - - - - - Application - - EWARM - - $PROJ_DIR$\startup_stm32f107xc.s - - - - User - - $PROJ_DIR$\..\Src\BASIC_HelloWorld.c - - - $PROJ_DIR$\..\Src\main.c - - - $PROJ_DIR$\..\Src\stm32f1xx_it.c - - - - - Doc - - $PROJ_DIR$\..\readme.txt - - - - Drivers - - BSP - - Components - - ili9320 - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\BSP\Components\ili9320\ili9320.c - - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\BSP\Components\ili9325\ili9325.c - - - - - STM3210C_EVAL - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\BSP\STM3210C_EVAL\stm3210c_eval.c - - - - - CMSIS - - $PROJ_DIR$\..\Src\system_stm32f1xx.c - - - - STM32F1xx_HAL_Driver - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.c - - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cortex.c - - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_dma.c - - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio.c - - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc.c - - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc_ex.c - - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_spi.c - - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_sram.c - - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_fsmc.c - - - - - Middlewares - - STemWin - - Config - - $PROJ_DIR$\..\Src\GUIConf_stm3210c_eval.c - - - $PROJ_DIR$\..\Src\LCDConf_stm32l10c_eval.c - - - - Lib - - $PROJ_DIR$\..\..\..\..\..\..\Middlewares\ST\STemWin\Lib\STemWin_CM3_wc32.a - - - - OS - - $PROJ_DIR$\..\..\..\..\..\..\Middlewares\ST\STemWin\OS\GUI_X.c - - - - - diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.eww b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.eww deleted file mode 100644 index e0fd14b..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.eww +++ /dev/null @@ -1,10 +0,0 @@ - - - - - $WS_DIR$\Project.ewp - - - - - diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/startup_stm32f107xc.s b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/startup_stm32f107xc.s deleted file mode 100644 index 6602b13..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/startup_stm32f107xc.s +++ /dev/null @@ -1,509 +0,0 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************* -;* File Name : startup_stm32f107xc.s -;* Author : MCD Application Team -;* Description : STM32F107xC Connectivity line devices vector table for -;* EWARM toolchain. -;* This module performs: -;* - Set the initial SP -;* - Configure the clock system -;* - Set the initial PC == __iar_program_start, -;* - Set the vector table entries with the exceptions ISR -;* address. -;* After Reset the Cortex-M3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;****************************************************************************** -;* @attention -;* -;*

© Copyright (c) 2016 STMicroelectronics. -;* All rights reserved.

-;* -;* This software component is licensed by ST under BSD 3-Clause license, -;* the "License"; You may not use this file except in compliance with the -;* License. You may obtain a copy of the License at: -;* opensource.org/licenses/BSD-3-Clause -;* -;****************************************************************************** -; -; -; The modules in this file are included in the libraries, and may be replaced -; by any user-defined modules that define the PUBLIC symbol _program_start or -; a user defined start symbol. -; To override the cstartup defined in the library, simply add your modified -; version to the workbench project. -; -; The vector table is normally located at address 0. -; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. -; The name "__vector_table" has special meaning for C-SPY: -; it is where the SP start value is found, and the NVIC vector -; table register (VTOR) is initialized to this address if != 0. -; -; Cortex-M version -; - - MODULE ?cstartup - - ;; Forward declaration of sections. - SECTION CSTACK:DATA:NOROOT(3) - - SECTION .intvec:CODE:NOROOT(2) - - EXTERN __iar_program_start - EXTERN SystemInit - PUBLIC __vector_table - - DATA -__vector_table - DCD sfe(CSTACK) - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 and ADC2 - DCD CAN1_TX_IRQHandler ; CAN1 TX - DCD CAN1_RX0_IRQHandler ; CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_IRQHandler ; TIM1 Break - DCD TIM1_UP_IRQHandler ; TIM1 Update - DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C1 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTC_Alarm_IRQHandler ; RTC alarm through EXTI line - DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD TIM5_IRQHandler ; TIM5 - DCD SPI3_IRQHandler ; SPI3 - DCD UART4_IRQHandler ; UART4 - DCD UART5_IRQHandler ; UART5 - DCD TIM6_IRQHandler ; TIM6 - DCD TIM7_IRQHandler ; TIM7 - DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 - DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 - DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 - DCD DMA2_Channel4_IRQHandler ; DMA2 Channel4 - DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5 - DCD ETH_IRQHandler ; Ethernet - DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line - DCD CAN2_TX_IRQHandler ; CAN2 TX - DCD CAN2_RX0_IRQHandler ; CAN2 RX0 - DCD CAN2_RX1_IRQHandler ; CAN2 RX1 - DCD CAN2_SCE_IRQHandler ; CAN2 SCE - DCD OTG_FS_IRQHandler ; USB OTG FS - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;; Default interrupt handlers. -;; - THUMB - - PUBWEAK Reset_Handler - SECTION .text:CODE:REORDER:NOROOT(2) -Reset_Handler - LDR R0, =SystemInit - BLX R0 - LDR R0, =__iar_program_start - BX R0 - - PUBWEAK NMI_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -NMI_Handler - B NMI_Handler - - PUBWEAK HardFault_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -HardFault_Handler - B HardFault_Handler - - PUBWEAK MemManage_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -MemManage_Handler - B MemManage_Handler - - PUBWEAK BusFault_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -BusFault_Handler - B BusFault_Handler - - PUBWEAK UsageFault_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -UsageFault_Handler - B UsageFault_Handler - - PUBWEAK SVC_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -SVC_Handler - B SVC_Handler - - PUBWEAK DebugMon_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -DebugMon_Handler - B DebugMon_Handler - - PUBWEAK PendSV_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -PendSV_Handler - B PendSV_Handler - - PUBWEAK SysTick_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -SysTick_Handler - B SysTick_Handler - - PUBWEAK WWDG_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -WWDG_IRQHandler - B WWDG_IRQHandler - - PUBWEAK PVD_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -PVD_IRQHandler - B PVD_IRQHandler - - PUBWEAK TAMPER_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TAMPER_IRQHandler - B TAMPER_IRQHandler - - PUBWEAK RTC_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -RTC_IRQHandler - B RTC_IRQHandler - - PUBWEAK FLASH_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -FLASH_IRQHandler - B FLASH_IRQHandler - - PUBWEAK RCC_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -RCC_IRQHandler - B RCC_IRQHandler - - PUBWEAK EXTI0_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -EXTI0_IRQHandler - B EXTI0_IRQHandler - - PUBWEAK EXTI1_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -EXTI1_IRQHandler - B EXTI1_IRQHandler - - PUBWEAK EXTI2_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -EXTI2_IRQHandler - B EXTI2_IRQHandler - - PUBWEAK EXTI3_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -EXTI3_IRQHandler - B EXTI3_IRQHandler - - - PUBWEAK EXTI4_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -EXTI4_IRQHandler - B EXTI4_IRQHandler - - PUBWEAK DMA1_Channel1_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA1_Channel1_IRQHandler - B DMA1_Channel1_IRQHandler - - PUBWEAK DMA1_Channel2_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA1_Channel2_IRQHandler - B DMA1_Channel2_IRQHandler - - PUBWEAK DMA1_Channel3_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA1_Channel3_IRQHandler - B DMA1_Channel3_IRQHandler - - PUBWEAK DMA1_Channel4_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA1_Channel4_IRQHandler - B DMA1_Channel4_IRQHandler - - PUBWEAK DMA1_Channel5_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA1_Channel5_IRQHandler - B DMA1_Channel5_IRQHandler - - PUBWEAK DMA1_Channel6_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA1_Channel6_IRQHandler - B DMA1_Channel6_IRQHandler - - PUBWEAK DMA1_Channel7_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA1_Channel7_IRQHandler - B DMA1_Channel7_IRQHandler - - PUBWEAK ADC1_2_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -ADC1_2_IRQHandler - B ADC1_2_IRQHandler - - PUBWEAK CAN1_TX_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -CAN1_TX_IRQHandler - B CAN1_TX_IRQHandler - - PUBWEAK CAN1_RX0_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -CAN1_RX0_IRQHandler - B CAN1_RX0_IRQHandler - - PUBWEAK CAN1_RX1_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -CAN1_RX1_IRQHandler - B CAN1_RX1_IRQHandler - - PUBWEAK CAN1_SCE_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -CAN1_SCE_IRQHandler - B CAN1_SCE_IRQHandler - - PUBWEAK EXTI9_5_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -EXTI9_5_IRQHandler - B EXTI9_5_IRQHandler - - PUBWEAK TIM1_BRK_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM1_BRK_IRQHandler - B TIM1_BRK_IRQHandler - - PUBWEAK TIM1_UP_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM1_UP_IRQHandler - B TIM1_UP_IRQHandler - - PUBWEAK TIM1_TRG_COM_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM1_TRG_COM_IRQHandler - B TIM1_TRG_COM_IRQHandler - - PUBWEAK TIM1_CC_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM1_CC_IRQHandler - B TIM1_CC_IRQHandler - - PUBWEAK TIM2_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM2_IRQHandler - B TIM2_IRQHandler - - PUBWEAK TIM3_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM3_IRQHandler - B TIM3_IRQHandler - - PUBWEAK TIM4_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM4_IRQHandler - B TIM4_IRQHandler - - PUBWEAK I2C1_EV_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -I2C1_EV_IRQHandler - B I2C1_EV_IRQHandler - - PUBWEAK I2C1_ER_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -I2C1_ER_IRQHandler - B I2C1_ER_IRQHandler - - PUBWEAK I2C2_EV_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -I2C2_EV_IRQHandler - B I2C2_EV_IRQHandler - - PUBWEAK I2C2_ER_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -I2C2_ER_IRQHandler - B I2C2_ER_IRQHandler - - PUBWEAK SPI1_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -SPI1_IRQHandler - B SPI1_IRQHandler - - PUBWEAK SPI2_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -SPI2_IRQHandler - B SPI2_IRQHandler - - PUBWEAK USART1_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -USART1_IRQHandler - B USART1_IRQHandler - - PUBWEAK USART2_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -USART2_IRQHandler - B USART2_IRQHandler - - PUBWEAK USART3_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -USART3_IRQHandler - B USART3_IRQHandler - - PUBWEAK EXTI15_10_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -EXTI15_10_IRQHandler - B EXTI15_10_IRQHandler - - PUBWEAK RTC_Alarm_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -RTC_Alarm_IRQHandler - B RTC_Alarm_IRQHandler - - PUBWEAK OTG_FS_WKUP_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -OTG_FS_WKUP_IRQHandler - B OTG_FS_WKUP_IRQHandler - - PUBWEAK TIM5_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM5_IRQHandler - B TIM5_IRQHandler - - PUBWEAK SPI3_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -SPI3_IRQHandler - B SPI3_IRQHandler - - PUBWEAK UART4_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -UART4_IRQHandler - B UART4_IRQHandler - - PUBWEAK UART5_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -UART5_IRQHandler - B UART5_IRQHandler - - PUBWEAK TIM6_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM6_IRQHandler - B TIM6_IRQHandler - - PUBWEAK TIM7_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM7_IRQHandler - B TIM7_IRQHandler - - PUBWEAK DMA2_Channel1_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA2_Channel1_IRQHandler - B DMA2_Channel1_IRQHandler - - PUBWEAK DMA2_Channel2_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA2_Channel2_IRQHandler - B DMA2_Channel2_IRQHandler - - PUBWEAK DMA2_Channel3_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA2_Channel3_IRQHandler - B DMA2_Channel3_IRQHandler - - PUBWEAK DMA2_Channel4_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA2_Channel4_IRQHandler - B DMA2_Channel4_IRQHandler - - PUBWEAK DMA2_Channel5_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA2_Channel5_IRQHandler - B DMA2_Channel5_IRQHandler - - PUBWEAK ETH_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -ETH_IRQHandler - B ETH_IRQHandler - - PUBWEAK ETH_WKUP_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -ETH_WKUP_IRQHandler - B ETH_WKUP_IRQHandler - - PUBWEAK CAN2_TX_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -CAN2_TX_IRQHandler - B CAN2_TX_IRQHandler - - PUBWEAK CAN2_RX0_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -CAN2_RX0_IRQHandler - B CAN2_RX0_IRQHandler - - PUBWEAK CAN2_RX1_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -CAN2_RX1_IRQHandler - B CAN2_RX1_IRQHandler - - PUBWEAK CAN2_SCE_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -CAN2_SCE_IRQHandler - B CAN2_SCE_IRQHandler - - PUBWEAK OTG_FS_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -OTG_FS_IRQHandler - B OTG_FS_IRQHandler - - END -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/stm32f107xc_flash.icf b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/stm32f107xc_flash.icf deleted file mode 100644 index 471d4d4..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/stm32f107xc_flash.icf +++ /dev/null @@ -1,31 +0,0 @@ -/*###ICF### Section handled by ICF editor, don't touch! ****/ -/*-Editor annotation file-*/ -/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ -/*-Specials-*/ -define symbol __ICFEDIT_intvec_start__ = 0x08000000; -/*-Memory Regions-*/ -define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ; -define symbol __ICFEDIT_region_ROM_end__ = 0x0803FFFF; -define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; -define symbol __ICFEDIT_region_RAM_end__ = 0x2000FFFF; -/*-Sizes-*/ -define symbol __ICFEDIT_size_cstack__ = 0x400; -define symbol __ICFEDIT_size_heap__ = 0x200; -/**** End of ICF editor section. ###ICF###*/ - - -define memory mem with size = 4G; -define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; -define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; - -define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; -define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; - -initialize by copy { readwrite }; -do not initialize { section .noinit }; - -place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; - -place in ROM_region { readonly }; -place in RAM_region { readwrite, - block CSTACK, block HEAP }; diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/GUIConf.h b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/GUIConf.h deleted file mode 100644 index 06f3bf3..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/GUIConf.h +++ /dev/null @@ -1,91 +0,0 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH & Co. KG * -* Solutions for real time microcontroller applications * -********************************************************************** -* * -* (c) 1996 - 2017 SEGGER Microcontroller GmbH & Co. KG * -* * -* Internet: www.segger.com Support: support@segger.com * -* * -********************************************************************** - -** emWin V5.44 - Graphical user interface for embedded applications ** -All Intellectual Property rights in the Software belongs to SEGGER. -emWin is protected by international copyright laws. Knowledge of the -source code may not be used to write a similar product. This file may -only be used in accordance with the following terms: - -The software has been licensed to STMicroelectronics International -N.V. a Dutch company with a Swiss branch and its headquarters in Plan- -les-Ouates, Geneva, 39 Chemin du Champ des Filles, Switzerland for the -purposes of creating libraries for ARM Cortex-M-based 32-bit microcon_ -troller products commercialized by Licensee only, sublicensed and dis_ -tributed under the terms and conditions of the End User License Agree_ -ment supplied by STMicroelectronics International N.V. -Full source code is available at: www.segger.com - -We appreciate your understanding and fairness. ----------------------------------------------------------------------- -File : GUIConf.h -Purpose : Configures emWins abilities, fonts etc. ----------------------------------------------------------------------- -*/ - -/** - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2018 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license SLA0044, - * the "License"; You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * http://www.st.com/SLA0044 - * - ****************************************************************************** - */ - -#ifndef GUICONF_H -#define GUICONF_H - -/********************************************************************* -* -* Multi layer/display support -*/ -#define GUI_NUM_LAYERS 2 // Maximum number of available layers - -/********************************************************************* -* -* Multi tasking support -*/ -#ifdef OS_SUPPORT - #define GUI_OS (1) // Compile with multitasking support -#else - #define GUI_OS (0) -#endif - -/********************************************************************* -* -* Configuration of touch support -*/ -#ifndef GUI_SUPPORT_TOUCH - #define GUI_SUPPORT_TOUCH (1) // Support touchscreen -#endif - -/********************************************************************* -* -* Default font -*/ -#define GUI_DEFAULT_FONT &GUI_Font6x8 - -/********************************************************************* -* -* Configuration of available packages -*/ -#define GUI_SUPPORT_MOUSE (1) /* Support a mouse */ -#define GUI_WINSUPPORT (1) /* Use window manager */ -#define GUI_SUPPORT_MEMDEV (1) /* Memory device package available */ -#define GUI_SUPPORT_DEVICES (1) /* Enable use of device pointers */ - -#endif /* Avoid multiple inclusion */ diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/LCDConf_stm3210c_eval.h b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/LCDConf_stm3210c_eval.h deleted file mode 100644 index 2fd71de..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/LCDConf_stm3210c_eval.h +++ /dev/null @@ -1,59 +0,0 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH & Co. KG * -* Solutions for real time microcontroller applications * -********************************************************************** -* * -* (c) 1996 - 2017 SEGGER Microcontroller GmbH & Co. KG * -* * -* Internet: www.segger.com Support: support@segger.com * -* * -********************************************************************** - -** emWin V5.44 - Graphical user interface for embedded applications ** -All Intellectual Property rights in the Software belongs to SEGGER. -emWin is protected by international copyright laws. Knowledge of the -source code may not be used to write a similar product. This file may -only be used in accordance with the following terms: - -The software has been licensed to STMicroelectronics International -N.V. a Dutch company with a Swiss branch and its headquarters in Plan- -les-Ouates, Geneva, 39 Chemin du Champ des Filles, Switzerland for the -purposes of creating libraries for ARM Cortex-M-based 32-bit microcon_ -troller products commercialized by Licensee only, sublicensed and dis_ -tributed under the terms and conditions of the End User License Agree_ -ment supplied by STMicroelectronics International N.V. -Full source code is available at: www.segger.com - -We appreciate your understanding and fairness. ----------------------------------------------------------------------- -File : LCDConf.h -Purpose : Display driver configuration file ----------------------------END-OF-HEADER------------------------------ -*/ - -/** - ****************************************************************************** - * @file LCDConf_stm3210c_eval.h - * @author MCD Application Team - * @brief Display driver configuration file -/** - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2018 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license SLA0044, - * the "License"; You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * http://www.st.com/SLA0044 - * - ****************************************************************************** - */ - -#ifndef LCDCONF_H -#define LCDCONF_H - -#endif /* LCDCONF_H */ - -/*************************** End of file ****************************/ diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/main.h b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/main.h deleted file mode 100644 index 3983c0b..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/main.h +++ /dev/null @@ -1,35 +0,0 @@ -/** - ****************************************************************************** - * @file main.h - * @author MCD Application Team - * @brief Header for main.c module - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __MAIN_H -#define __MAIN_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" -#include "GUI.h" - -/* EVAL includes component */ -#include "stm3210c_eval.h" -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -#endif /* __MAIN_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/stm32f1xx_hal_conf.h b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/stm32f1xx_hal_conf.h deleted file mode 100644 index c4f1d76..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/stm32f1xx_hal_conf.h +++ /dev/null @@ -1,397 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_CONF_H -#define __STM32F1xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_ETH_MODULE_ENABLED */ -/* #define HAL_EXTI_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -#define HAL_NOR_MODULE_ENABLED -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_PCD_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -#define HAL_SPI_MODULE_ENABLED -#define HAL_SRAM_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -/* #define HAL_UART_MODULE_ENABLED */ -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ - -/* ########################## Oscillator Values adaptation ####################*/ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) -#if defined(USE_STM3210C_EVAL) - #define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */ -#else - #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ -#endif -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz */ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ - -/** - * @brief External Low Speed oscillator (LSE) value. - * This value is used by the UART, RTC HAL module to compute the system frequency - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE 3300U /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ - -#define ETH_RXBUFNB 8U /* 8 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848 PHY Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ -#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ -#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - -#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ -#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ - -#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ -#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ - -#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ -#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver - * Activated: CRC code is present inside driver - * Deactivated: CRC code cleaned from driver - */ - -#define USE_SPI_CRC 1U - - - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f1xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f1xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f1xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f1xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f1xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f1xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "Legacy/stm32f1xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f1xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f1xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f1xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f1xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f1xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f1xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f1xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f1xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f1xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f1xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f1xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f1xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f1xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f1xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f1xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f1xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f1xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f1xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f1xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f1xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f1xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f1xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f1xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f1xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f1xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/stm32f1xx_it.h b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/stm32f1xx_it.h deleted file mode 100644 index f8fff48..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/stm32f1xx_it.h +++ /dev/null @@ -1,50 +0,0 @@ -/** - ****************************************************************************** - * @file STemWin\STemWin_HelloWorld\Inc\stm32f1xx_it.h - * @author MCD Application Team - * @brief This file contains the headers of the interrupt handlers. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_IT_H -#define __STM32F1xx_IT_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMI_Handler(void); -void HardFault_Handler(void); -void MemManage_Handler(void); -void BusFault_Handler(void); -void UsageFault_Handler(void); -void SVC_Handler(void); -void DebugMon_Handler(void); -void PendSV_Handler(void); -void SysTick_Handler(void); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_IT_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/Project.uvoptx b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/Project.uvoptx deleted file mode 100644 index 1953f15..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/Project.uvoptx +++ /dev/null @@ -1,523 +0,0 @@ - - - - 1.0 - -
### uVision Project, (C) Keil Software
- - - *.c - *.s*;*.src - *.obj; *.o - *.lib;*.a* - *.txt; *.h; *.inc - *.plm - *.cpp - 0 - - - - 0 - 0 - - - - STM3210C_EVAL - 0x4 - ARM-ADS - - 8000000 - - 1 - 1 - 0 - 1 - 0 - - - 1 - 65535 - 0 - 0 - 0 - - - 79 - 66 - 8 - - - - 1 - 1 - 1 - 0 - 1 - 1 - 0 - 1 - 0 - 0 - 0 - 0 - - - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - - - 1 - 0 - 1 - - 0 - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - 1 - 5 - - - - - - - - - - - STLink\ST-LINKIII-KEIL_SWO.dll - - - - 0 - UL2CM3 - UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_CL -FS08000000 -FL080000 -FP0($$Device:STM32F107VC$Flash\STM32F10x_CL.FLM)) - - - 0 - ST-LINKIII-KEIL_SWO - -U-O142 -O2254 -S0 -C0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_CL -FS08000000 -FL040000 -FP0($$Device:STM32F107VC$Flash\STM32F10x_CL.FLM) - - - - - 0 - - - 0 - 1 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - - - - 0 - 0 - 0 - - - - - - - - - Middlewares/STemWin/Config - 0 - 0 - 0 - 0 - - 1 - 1 - 1 - 0 - 0 - 0 - ../Src/GUIConf_stm3210c_eval.c - GUIConf_stm3210c_eval.c - 0 - 0 - - - 1 - 2 - 1 - 0 - 0 - 0 - ../Src/LCDConf_stm32l10c_eval.c - LCDConf_stm32l10c_eval.c - 0 - 0 - - - - - Drivers/BSP/Components/ili9320 - 0 - 0 - 0 - 0 - - 2 - 3 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/BSP/Components/ili9320/ili9320.c - ili9320.c - 0 - 0 - - - 2 - 4 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/BSP/Components/ili9325/ili9325.c - ili9325.c - 0 - 0 - - - - - Drivers/STM32F1xx_HAL_Driver - 0 - 0 - 0 - 0 - - 3 - 5 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c - stm32f1xx_hal_rcc.c - 0 - 0 - - - 3 - 6 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c - stm32f1xx_hal_cortex.c - 0 - 0 - - - 3 - 7 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_fsmc.c - stm32f1xx_ll_fsmc.c - 0 - 0 - - - 3 - 8 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c - stm32f1xx_hal_gpio.c - 0 - 0 - - - 3 - 9 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c - stm32f1xx_hal_rcc_ex.c - 0 - 0 - - - 3 - 10 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sram.c - stm32f1xx_hal_sram.c - 0 - 0 - - - 3 - 11 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c - stm32f1xx_hal_spi.c - 0 - 0 - - - 3 - 12 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c - stm32f1xx_hal.c - 0 - 0 - - - 3 - 13 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c - stm32f1xx_hal_dma.c - 0 - 0 - - - - - Drivers/CMSIS - 0 - 0 - 0 - 0 - - 4 - 14 - 1 - 0 - 0 - 0 - ../Src/system_stm32f1xx.c - system_stm32f1xx.c - 0 - 0 - - - - - Drivers/BSP/STM3210C_EVAL - 0 - 0 - 0 - 0 - - 5 - 15 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/BSP/STM3210C_EVAL/stm3210c_eval.c - stm3210c_eval.c - 0 - 0 - - - - - Middlewares/STemWin/OS - 0 - 0 - 0 - 0 - - 6 - 16 - 1 - 0 - 0 - 0 - ../../../../../../Middlewares/ST/STemWin/OS/GUI_X.c - GUI_X.c - 0 - 0 - - - - - Application/User - 1 - 0 - 0 - 0 - - 7 - 17 - 1 - 0 - 0 - 0 - ../Src/main.c - main.c - 0 - 0 - - - 7 - 18 - 1 - 0 - 0 - 0 - ../Src/BASIC_HelloWorld.c - BASIC_HelloWorld.c - 0 - 0 - - - 7 - 19 - 1 - 0 - 0 - 0 - ../Src/stm32f1xx_it.c - stm32f1xx_it.c - 0 - 0 - - - - - Doc - 1 - 0 - 0 - 0 - - 8 - 20 - 5 - 0 - 0 - 0 - ../readme.txt - readme.txt - 0 - 0 - - - - - Application/MDK-ARM - 0 - 0 - 0 - 0 - - 9 - 21 - 2 - 0 - 0 - 0 - startup_stm32f107xc.s - startup_stm32f107xc.s - 0 - 0 - - - - - Middlewares/STemWin/Lib - 1 - 0 - 0 - 0 - - 10 - 22 - 2 - 0 - 0 - 0 - ..\..\..\..\..\..\Middlewares\ST\STemWin\Lib\STemWin_CM3_wc16.a - STemWin_CM3_wc16.a - 0 - 0 - - - - - ::CMSIS - 0 - 0 - 0 - 1 - - - diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/Project.uvprojx b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/Project.uvprojx deleted file mode 100644 index 9004749..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/Project.uvprojx +++ /dev/null @@ -1,559 +0,0 @@ - - - - 2.1 - -
### uVision Project, (C) Keil Software
- - - - STM3210C_EVAL - 0x4 - ARM-ADS - 5060422::V5.06 update 4 (build 422)::ARMCC - - - STM32F107VC - STMicroelectronics - Keil.STM32F1xx_DFP.2.0.0 - http://www.keil.com/pack/ - IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x803FFFF) CLOCK(25000000) CPUTYPE("Cortex-M3") - - - - - - - - - - - - - - - $$Device:STM32F107VC$SVD\STM32F107xx.svd - 0 - 0 - - - - - - - 0 - 0 - 0 - 0 - 1 - - STM3210C_EVAL\ - STM3210C_EVAL - 1 - 0 - 0 - 1 - 1 - - 1 - 0 - 0 - - 0 - 0 - - - 0 - 0 - 0 - 0 - - - 0 - 0 - - - 0 - 0 - 0 - 0 - - - 0 - 0 - - - 0 - 0 - 0 - 0 - - 0 - - - - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 3 - - - 0 - - - SARMCM3.DLL - -REMAP - DCM.DLL - -pCM3 - SARMCM3.DLL - - TCM.DLL - -pCM3 - - - - 1 - 0 - 0 - 0 - 16 - - - - - 1 - 0 - 0 - 1 - 1 - 4107 - - 1 - STLink\ST-LINKIII-KEIL_SWO.dll - - - - - - 0 - - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 1 - 0 - 1 - 1 - 0 - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - "Cortex-M3" - - 0 - 0 - 0 - 1 - 1 - 0 - 0 - 0 - 0 - 0 - 8 - 1 - 0 - 0 - 0 - 3 - 3 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 1 - 0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x10000 - - - 1 - 0x8000000 - 0x40000 - - - 0 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x8000000 - 0x40000 - - - 1 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x10000 - - - 0 - 0x0 - 0x0 - - - - - - 1 - 4 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 0 - 2 - 0 - 0 - 0 - 0 - 1 - 1 - 1 - 1 - 0 - 0 - 0 - - --C99 - USE_HAL_DRIVER,STM32F107xC,USE_STM3210C_EVAL - - ../Inc;../../../../../../Drivers/CMSIS/Device/ST/STM32F1xx/Include;../../../../../../Drivers/STM32F1xx_HAL_Driver/Inc;../../../../../../Drivers/BSP/STM3210C_EVAL;../../../../../../Drivers/BSP/Components;../../../../../../Drivers/BSP/Components/Common;../../../../../../Middlewares/ST/STemWin/inc - - - - 1 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - - - - - - - - - 1 - 0 - 0 - 0 - 1 - 0 - 0x08000000 - 0x20000000 - - - - - - - - - - - - - Middlewares/STemWin/Config - - - GUIConf_stm3210c_eval.c - 1 - ../Src/GUIConf_stm3210c_eval.c - - - LCDConf_stm32l10c_eval.c - 1 - ../Src/LCDConf_stm32l10c_eval.c - - - - - Drivers/BSP/Components/ili9320 - - - ili9320.c - 1 - ../../../../../../Drivers/BSP/Components/ili9320/ili9320.c - - - ili9325.c - 1 - ../../../../../../Drivers/BSP/Components/ili9325/ili9325.c - - - - - Drivers/STM32F1xx_HAL_Driver - - - stm32f1xx_hal_rcc.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c - - - stm32f1xx_hal_cortex.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c - - - stm32f1xx_ll_fsmc.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_fsmc.c - - - stm32f1xx_hal_gpio.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c - - - stm32f1xx_hal_rcc_ex.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c - - - stm32f1xx_hal_sram.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sram.c - - - stm32f1xx_hal_spi.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c - - - stm32f1xx_hal.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c - - - stm32f1xx_hal_dma.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c - - - - - Drivers/CMSIS - - - system_stm32f1xx.c - 1 - ../Src/system_stm32f1xx.c - - - - - Drivers/BSP/STM3210C_EVAL - - - stm3210c_eval.c - 1 - ../../../../../../Drivers/BSP/STM3210C_EVAL/stm3210c_eval.c - - - - - Middlewares/STemWin/OS - - - GUI_X.c - 1 - ../../../../../../Middlewares/ST/STemWin/OS/GUI_X.c - - - - - Application/User - - - main.c - 1 - ../Src/main.c - - - BASIC_HelloWorld.c - 1 - ../Src/BASIC_HelloWorld.c - - - stm32f1xx_it.c - 1 - ../Src/stm32f1xx_it.c - - - - - Doc - - - readme.txt - 5 - ../readme.txt - - - - - Application/MDK-ARM - - - startup_stm32f107xc.s - 2 - startup_stm32f107xc.s - - - - - Middlewares/STemWin/Lib - - - STemWin_CM3_wc16.a - 4 - ..\..\..\..\..\..\Middlewares\ST\STemWin\Lib\STemWin_CM3_wc16.a - - - - - ::CMSIS - - - - - - - - - - - - - - - - - - - diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/startup_stm32f107xc.s b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/startup_stm32f107xc.s deleted file mode 100644 index d4411d1..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/startup_stm32f107xc.s +++ /dev/null @@ -1,368 +0,0 @@ -;******************** (C) COPYRIGHT 2017 STMicroelectronics ******************** -;* File Name : startup_stm32f107xc.s -;* Author : MCD Application Team -;* Description : STM32F107xC Devices vector table for MDK-ARM toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == Reset_Handler -;* - Set the vector table entries with the exceptions ISR address -;* - Configure the clock system -;* - Branches to __main in the C library (which eventually -;* calls main()). -;* After Reset the Cortex-M3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;****************************************************************************** -;* @attention -;* -;* Copyright (c) 2017 STMicroelectronics. -;* All rights reserved. -;* -;* This software component is licensed by ST under BSD 3-Clause license, -;* the "License"; You may not use this file except in compliance with the -;* License. You may obtain a copy of the License at: -;* opensource.org/licenses/BSD-3-Clause -;* -;****************************************************************************** - -; Amount of memory (in bytes) allocated for Stack -; Tailor this value to your application needs -; Stack Configuration -; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> -; - -Stack_Size EQU 0x400 - - AREA STACK, NOINIT, READWRITE, ALIGN=3 -Stack_Mem SPACE Stack_Size -__initial_sp - - -; Heap Configuration -; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -; - -Heap_Size EQU 0x200 - - AREA HEAP, NOINIT, READWRITE, ALIGN=3 -__heap_base -Heap_Mem SPACE Heap_Size -__heap_limit - - PRESERVE8 - THUMB - - -; Vector Table Mapped to Address 0 at Reset - AREA RESET, DATA, READONLY - EXPORT __Vectors - EXPORT __Vectors_End - EXPORT __Vectors_Size - -__Vectors DCD __initial_sp ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 and ADC2 - DCD CAN1_TX_IRQHandler ; CAN1 TX - DCD CAN1_RX0_IRQHandler ; CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_IRQHandler ; TIM1 Break - DCD TIM1_UP_IRQHandler ; TIM1 Update - DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C1 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTC_Alarm_IRQHandler ; RTC alarm through EXTI line - DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD TIM5_IRQHandler ; TIM5 - DCD SPI3_IRQHandler ; SPI3 - DCD UART4_IRQHandler ; UART4 - DCD UART5_IRQHandler ; UART5 - DCD TIM6_IRQHandler ; TIM6 - DCD TIM7_IRQHandler ; TIM7 - DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 - DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 - DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 - DCD DMA2_Channel4_IRQHandler ; DMA2 Channel4 - DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5 - DCD ETH_IRQHandler ; Ethernet - DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line - DCD CAN2_TX_IRQHandler ; CAN2 TX - DCD CAN2_RX0_IRQHandler ; CAN2 RX0 - DCD CAN2_RX1_IRQHandler ; CAN2 RX1 - DCD CAN2_SCE_IRQHandler ; CAN2 SCE - DCD OTG_FS_IRQHandler ; USB OTG FS -__Vectors_End - -__Vectors_Size EQU __Vectors_End - __Vectors - - AREA |.text|, CODE, READONLY - -; Reset handler -Reset_Handler PROC - EXPORT Reset_Handler [WEAK] - IMPORT SystemInit - IMPORT __main - LDR R0, =SystemInit - BLX R0 - LDR R0, =__main - BX R0 - ENDP - -; Dummy Exception Handlers (infinite loops which can be modified) - -NMI_Handler PROC - EXPORT NMI_Handler [WEAK] - B . - ENDP -HardFault_Handler\ - PROC - EXPORT HardFault_Handler [WEAK] - B . - ENDP -MemManage_Handler\ - PROC - EXPORT MemManage_Handler [WEAK] - B . - ENDP -BusFault_Handler\ - PROC - EXPORT BusFault_Handler [WEAK] - B . - ENDP -UsageFault_Handler\ - PROC - EXPORT UsageFault_Handler [WEAK] - B . - ENDP -SVC_Handler PROC - EXPORT SVC_Handler [WEAK] - B . - ENDP -DebugMon_Handler\ - PROC - EXPORT DebugMon_Handler [WEAK] - B . - ENDP -PendSV_Handler PROC - EXPORT PendSV_Handler [WEAK] - B . - ENDP -SysTick_Handler PROC - EXPORT SysTick_Handler [WEAK] - B . - ENDP - -Default_Handler PROC - - EXPORT WWDG_IRQHandler [WEAK] - EXPORT PVD_IRQHandler [WEAK] - EXPORT TAMPER_IRQHandler [WEAK] - EXPORT RTC_IRQHandler [WEAK] - EXPORT FLASH_IRQHandler [WEAK] - EXPORT RCC_IRQHandler [WEAK] - EXPORT EXTI0_IRQHandler [WEAK] - EXPORT EXTI1_IRQHandler [WEAK] - EXPORT EXTI2_IRQHandler [WEAK] - EXPORT EXTI3_IRQHandler [WEAK] - EXPORT EXTI4_IRQHandler [WEAK] - EXPORT DMA1_Channel1_IRQHandler [WEAK] - EXPORT DMA1_Channel2_IRQHandler [WEAK] - EXPORT DMA1_Channel3_IRQHandler [WEAK] - EXPORT DMA1_Channel4_IRQHandler [WEAK] - EXPORT DMA1_Channel5_IRQHandler [WEAK] - EXPORT DMA1_Channel6_IRQHandler [WEAK] - EXPORT DMA1_Channel7_IRQHandler [WEAK] - EXPORT ADC1_2_IRQHandler [WEAK] - EXPORT CAN1_TX_IRQHandler [WEAK] - EXPORT CAN1_RX0_IRQHandler [WEAK] - EXPORT CAN1_RX1_IRQHandler [WEAK] - EXPORT CAN1_SCE_IRQHandler [WEAK] - EXPORT EXTI9_5_IRQHandler [WEAK] - EXPORT TIM1_BRK_IRQHandler [WEAK] - EXPORT TIM1_UP_IRQHandler [WEAK] - EXPORT TIM1_TRG_COM_IRQHandler [WEAK] - EXPORT TIM1_CC_IRQHandler [WEAK] - EXPORT TIM2_IRQHandler [WEAK] - EXPORT TIM3_IRQHandler [WEAK] - EXPORT TIM4_IRQHandler [WEAK] - EXPORT I2C1_EV_IRQHandler [WEAK] - EXPORT I2C1_ER_IRQHandler [WEAK] - EXPORT I2C2_EV_IRQHandler [WEAK] - EXPORT I2C2_ER_IRQHandler [WEAK] - EXPORT SPI1_IRQHandler [WEAK] - EXPORT SPI2_IRQHandler [WEAK] - EXPORT USART1_IRQHandler [WEAK] - EXPORT USART2_IRQHandler [WEAK] - EXPORT USART3_IRQHandler [WEAK] - EXPORT EXTI15_10_IRQHandler [WEAK] - EXPORT RTC_Alarm_IRQHandler [WEAK] - EXPORT OTG_FS_WKUP_IRQHandler [WEAK] - EXPORT TIM5_IRQHandler [WEAK] - EXPORT SPI3_IRQHandler [WEAK] - EXPORT UART4_IRQHandler [WEAK] - EXPORT UART5_IRQHandler [WEAK] - EXPORT TIM6_IRQHandler [WEAK] - EXPORT TIM7_IRQHandler [WEAK] - EXPORT DMA2_Channel1_IRQHandler [WEAK] - EXPORT DMA2_Channel2_IRQHandler [WEAK] - EXPORT DMA2_Channel3_IRQHandler [WEAK] - EXPORT DMA2_Channel4_IRQHandler [WEAK] - EXPORT DMA2_Channel5_IRQHandler [WEAK] - EXPORT ETH_IRQHandler [WEAK] - EXPORT ETH_WKUP_IRQHandler [WEAK] - EXPORT CAN2_TX_IRQHandler [WEAK] - EXPORT CAN2_RX0_IRQHandler [WEAK] - EXPORT CAN2_RX1_IRQHandler [WEAK] - EXPORT CAN2_SCE_IRQHandler [WEAK] - EXPORT OTG_FS_IRQHandler [WEAK] - -WWDG_IRQHandler -PVD_IRQHandler -TAMPER_IRQHandler -RTC_IRQHandler -FLASH_IRQHandler -RCC_IRQHandler -EXTI0_IRQHandler -EXTI1_IRQHandler -EXTI2_IRQHandler -EXTI3_IRQHandler -EXTI4_IRQHandler -DMA1_Channel1_IRQHandler -DMA1_Channel2_IRQHandler -DMA1_Channel3_IRQHandler -DMA1_Channel4_IRQHandler -DMA1_Channel5_IRQHandler -DMA1_Channel6_IRQHandler -DMA1_Channel7_IRQHandler -ADC1_2_IRQHandler -CAN1_TX_IRQHandler -CAN1_RX0_IRQHandler -CAN1_RX1_IRQHandler -CAN1_SCE_IRQHandler -EXTI9_5_IRQHandler -TIM1_BRK_IRQHandler -TIM1_UP_IRQHandler -TIM1_TRG_COM_IRQHandler -TIM1_CC_IRQHandler -TIM2_IRQHandler -TIM3_IRQHandler -TIM4_IRQHandler -I2C1_EV_IRQHandler -I2C1_ER_IRQHandler -I2C2_EV_IRQHandler -I2C2_ER_IRQHandler -SPI1_IRQHandler -SPI2_IRQHandler -USART1_IRQHandler -USART2_IRQHandler -USART3_IRQHandler -EXTI15_10_IRQHandler -RTC_Alarm_IRQHandler -OTG_FS_WKUP_IRQHandler -TIM5_IRQHandler -SPI3_IRQHandler -UART4_IRQHandler -UART5_IRQHandler -TIM6_IRQHandler -TIM7_IRQHandler -DMA2_Channel1_IRQHandler -DMA2_Channel2_IRQHandler -DMA2_Channel3_IRQHandler -DMA2_Channel4_IRQHandler -DMA2_Channel5_IRQHandler -ETH_IRQHandler -ETH_WKUP_IRQHandler -CAN2_TX_IRQHandler -CAN2_RX0_IRQHandler -CAN2_RX1_IRQHandler -CAN2_SCE_IRQHandler -OTG_FS_IRQHandler - - B . - - ENDP - - ALIGN - -;******************************************************************************* -; User Stack and Heap initialization -;******************************************************************************* - IF :DEF:__MICROLIB - - EXPORT __initial_sp - EXPORT __heap_base - EXPORT __heap_limit - - ELSE - - IMPORT __use_two_region_memory - EXPORT __user_initial_stackheap - -__user_initial_stackheap - - LDR R0, = Heap_Mem - LDR R1, =(Stack_Mem + Stack_Size) - LDR R2, = (Heap_Mem + Heap_Size) - LDR R3, = Stack_Mem - BX LR - - ALIGN - - ENDIF - - END - -;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210C_EVAL/.cproject b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210C_EVAL/.cproject deleted file mode 100644 index 943bb37..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210C_EVAL/.cproject +++ /dev/null @@ -1,142 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210C_EVAL/.project b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210C_EVAL/.project deleted file mode 100644 index f101fe5..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210C_EVAL/.project +++ /dev/null @@ -1,134 +0,0 @@ - - - STM3210C_EVAL - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - fr.ac6.mcu.ide.core.MCUProjectNature - - - - Doc/readme.txt - 1 - PARENT-2-PROJECT_LOC/readme.txt - - - Application/SW4STM32/startup_stm32f107xc.s - 1 - PARENT-1-PROJECT_LOC/startup_stm32f107xc.s - - - Application/User/BASIC_HelloWorld.c - 1 - PARENT-2-PROJECT_LOC/Src/BASIC_HelloWorld.c - - - Application/User/main.c - 1 - PARENT-2-PROJECT_LOC/Src/main.c - - - Application/User/stm32f1xx_it.c - 1 - PARENT-2-PROJECT_LOC/Src/stm32f1xx_it.c - - - Drivers/CMSIS/system_stm32f1xx.c - 1 - PARENT-2-PROJECT_LOC/Src/system_stm32f1xx.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_hal.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_hal_cortex.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_hal_dma.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_hal_gpio.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_hal_rcc.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_hal_rcc_ex.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_hal_spi.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_hal_sram.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sram.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_ll_fsmc.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_fsmc.c - - - Drivers/BSP/STM3210C_EVAL/stm3210c_eval.c - 1 - PARENT-7-PROJECT_LOC/Drivers/BSP/STM3210C_EVAL/stm3210c_eval.c - - - Middlewares/STemWin/Config/GUIConf_stm3210c_eval.c - 1 - PARENT-2-PROJECT_LOC/Src/GUIConf_stm3210c_eval.c - - - Middlewares/STemWin/Config/LCDConf_stm32l10c_eval.c - 1 - PARENT-2-PROJECT_LOC/Src/LCDConf_stm32l10c_eval.c - - - Middlewares/STemWin/OS/GUI_X.c - 1 - PARENT-7-PROJECT_LOC/Middlewares/ST/STemWin/OS/GUI_X.c - - - Drivers/BSP/Components/ili9320/ili9320.c - 1 - PARENT-7-PROJECT_LOC/Drivers/BSP/Components/ili9320/ili9320.c - - - Drivers/BSP/Components/ili9320/ili9325.c - 1 - PARENT-7-PROJECT_LOC/Drivers/BSP/Components/ili9325/ili9325.c - - - diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210C_EVAL/STM32F107VCTx_FLASH.ld b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210C_EVAL/STM32F107VCTx_FLASH.ld deleted file mode 100644 index 8af4a55..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210C_EVAL/STM32F107VCTx_FLASH.ld +++ /dev/null @@ -1,169 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F107VCTx Device with -** 256KByte FLASH, 64KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20010000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/startup_stm32f107xc.s b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/startup_stm32f107xc.s deleted file mode 100644 index f2f314a..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/startup_stm32f107xc.s +++ /dev/null @@ -1,469 +0,0 @@ -/** - *************** (C) COPYRIGHT 2017 STMicroelectronics ************************ - * @file startup_stm32f107xc.s - * @author MCD Application Team - * @brief STM32F107xC Devices vector table for Atollic toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Configure the clock system - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF1E0F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss - -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler - -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_2_IRQHandler - .word CAN1_TX_IRQHandler - .word CAN1_RX0_IRQHandler - .word CAN1_RX1_IRQHandler - .word CAN1_SCE_IRQHandler - .word EXTI9_5_IRQHandler - .word TIM1_BRK_IRQHandler - .word TIM1_UP_IRQHandler - .word TIM1_TRG_COM_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word TIM4_IRQHandler - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word I2C2_EV_IRQHandler - .word I2C2_ER_IRQHandler - .word SPI1_IRQHandler - .word SPI2_IRQHandler - .word USART1_IRQHandler - .word USART2_IRQHandler - .word USART3_IRQHandler - .word EXTI15_10_IRQHandler - .word RTC_Alarm_IRQHandler - .word OTG_FS_WKUP_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word TIM5_IRQHandler - .word SPI3_IRQHandler - .word UART4_IRQHandler - .word UART5_IRQHandler - .word TIM6_IRQHandler - .word TIM7_IRQHandler - .word DMA2_Channel1_IRQHandler - .word DMA2_Channel2_IRQHandler - .word DMA2_Channel3_IRQHandler - .word DMA2_Channel4_IRQHandler - .word DMA2_Channel5_IRQHandler - .word ETH_IRQHandler - .word ETH_WKUP_IRQHandler - .word CAN2_TX_IRQHandler - .word CAN2_RX0_IRQHandler - .word CAN2_RX1_IRQHandler - .word CAN2_SCE_IRQHandler - .word OTG_FS_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x1E0. This is for boot in RAM mode for - STM32F10x Connectivity line Devices. */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_2_IRQHandler - .thumb_set ADC1_2_IRQHandler,Default_Handler - - .weak CAN1_TX_IRQHandler - .thumb_set CAN1_TX_IRQHandler,Default_Handler - - .weak CAN1_RX0_IRQHandler - .thumb_set CAN1_RX0_IRQHandler,Default_Handler - - .weak CAN1_RX1_IRQHandler - .thumb_set CAN1_RX1_IRQHandler,Default_Handler - - .weak CAN1_SCE_IRQHandler - .thumb_set CAN1_SCE_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_IRQHandler - .thumb_set TIM1_BRK_IRQHandler,Default_Handler - - .weak TIM1_UP_IRQHandler - .thumb_set TIM1_UP_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_IRQHandler - .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTC_Alarm_IRQHandler - .thumb_set RTC_Alarm_IRQHandler,Default_Handler - - .weak OTG_FS_WKUP_IRQHandler - .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler - - .weak TIM5_IRQHandler - .thumb_set TIM5_IRQHandler,Default_Handler - - .weak SPI3_IRQHandler - .thumb_set SPI3_IRQHandler,Default_Handler - - .weak UART4_IRQHandler - .thumb_set UART4_IRQHandler,Default_Handler - - .weak UART5_IRQHandler - .thumb_set UART5_IRQHandler,Default_Handler - - .weak TIM6_IRQHandler - .thumb_set TIM6_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak DMA2_Channel1_IRQHandler - .thumb_set DMA2_Channel1_IRQHandler,Default_Handler - - .weak DMA2_Channel2_IRQHandler - .thumb_set DMA2_Channel2_IRQHandler,Default_Handler - - .weak DMA2_Channel3_IRQHandler - .thumb_set DMA2_Channel3_IRQHandler,Default_Handler - - .weak DMA2_Channel4_IRQHandler - .thumb_set DMA2_Channel4_IRQHandler,Default_Handler - - .weak DMA2_Channel5_IRQHandler - .thumb_set DMA2_Channel5_IRQHandler,Default_Handler - - .weak ETH_IRQHandler - .thumb_set ETH_IRQHandler,Default_Handler - - .weak ETH_WKUP_IRQHandler - .thumb_set ETH_WKUP_IRQHandler,Default_Handler - - .weak CAN2_TX_IRQHandler - .thumb_set CAN2_TX_IRQHandler,Default_Handler - - .weak CAN2_RX0_IRQHandler - .thumb_set CAN2_RX0_IRQHandler,Default_Handler - - .weak CAN2_RX1_IRQHandler - .thumb_set CAN2_RX1_IRQHandler,Default_Handler - - .weak CAN2_SCE_IRQHandler - .thumb_set CAN2_SCE_IRQHandler,Default_Handler - - .weak OTG_FS_IRQHandler - .thumb_set OTG_FS_IRQHandler ,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/BASIC_HelloWorld.c b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/BASIC_HelloWorld.c deleted file mode 100644 index 1b21e8a..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/BASIC_HelloWorld.c +++ /dev/null @@ -1,42 +0,0 @@ -/********************************************************************* -* SEGGER MICROCONTROLLER SYSTEME GmbH * -* Solutions for real time microcontroller applications * -********************************************************************** -* * -* (c) 1996 - 2004 SEGGER Microcontroller Systeme GmbH * -* * -* Internet: www.segger.com Support: support@segger.com * -* * -********************************************************************** - -***** emWin - Graphical user interface for embedded applications ***** -emWin is protected by international copyright laws. Knowledge of the -source code may not be used to write a similar product. This file may -only be used in accordance with a license and should not be re- -distributed in any way. We appreciate your understanding and fairness. ----------------------------------------------------------------------- -File : BASIC_HelloWorld.c -Purpose : Simple demo drawing "Hello world" ----------------------------------------------------------------------- -*/ - -#include "GUI.h" - -/********************************************************************* -* -* Public code -* -********************************************************************** -*/ -/********************************************************************* -* -* MainTask -*/ -void MainTask(void) { - GUI_Clear(); - GUI_SetFont(&GUI_Font20_1); - GUI_DispStringAt("Hello world!", (LCD_GetXSize()-100)/2, (LCD_GetYSize()-20)/2); - while(1); -} - -/*************************** End of file ****************************/ diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/GUIConf_stm3210c_eval.c b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/GUIConf_stm3210c_eval.c deleted file mode 100644 index c15d40d..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/GUIConf_stm3210c_eval.c +++ /dev/null @@ -1,96 +0,0 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH & Co. KG * -* Solutions for real time microcontroller applications * -********************************************************************** -* * -* (c) 1996 - 2017 SEGGER Microcontroller GmbH & Co. KG * -* * -* Internet: www.segger.com Support: support@segger.com * -* * -********************************************************************** - -** emWin V5.44 - Graphical user interface for embedded applications ** -All Intellectual Property rights in the Software belongs to SEGGER. -emWin is protected by international copyright laws. Knowledge of the -source code may not be used to write a similar product. This file may -only be used in accordance with the following terms: - -The software has been licensed to STMicroelectronics International -N.V. a Dutch company with a Swiss branch and its headquarters in Plan- -les-Ouates, Geneva, 39 Chemin du Champ des Filles, Switzerland for the -purposes of creating libraries for ARM Cortex-M-based 32-bit microcon_ -troller products commercialized by Licensee only, sublicensed and dis_ -tributed under the terms and conditions of the End User License Agree_ -ment supplied by STMicroelectronics International N.V. -Full source code is available at: www.segger.com - -We appreciate your understanding and fairness. ----------------------------------------------------------------------- -File : GUIConf.c -Purpose : Display controller initialization ----------------------------END-OF-HEADER------------------------------ -*/ - -/** - ****************************************************************************** - * @file GUIConf_stm3210c_eval.c - * @author MCD Application Team - * @brief Display controller initialization - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2018 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license SLA0044, - * the "License"; You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * http://www.st.com/SLA0044 - * - ****************************************************************************** - */ -#include "GUI.h" -/********************************************************************* -* -* Defines, configurable -* -********************************************************************** -*/ - -/* - * Define the available number of bytes available for the GUI - */ -#define GUI_NUMBYTES (1024) * 5 /*!< x KByte */ - -/********************************************************************* -* -* Static data -* -********************************************************************** -*/ - -/* 32 bit aligned memory area */ -static U32 extMem[GUI_NUMBYTES / 4]; - -/********************************************************************* -* -* Public code -* -********************************************************************** -*/ -/********************************************************************* -* -* GUI_X_Config -* -* Purpose: -* Called during the initialization process in order to set up the -* available memory for the GUI. -*/ -void GUI_X_Config(void) -{ - - GUI_ALLOC_AssignMemory(extMem, GUI_NUMBYTES); - -} - -/*************************** End of file ****************************/ diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/LCDConf_stm32l10c_eval.c b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/LCDConf_stm32l10c_eval.c deleted file mode 100644 index bb6c1fd..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/LCDConf_stm32l10c_eval.c +++ /dev/null @@ -1,298 +0,0 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH & Co. KG * -* Solutions for real time microcontroller applications * -********************************************************************** -* * -* (c) 1996 - 2017 SEGGER Microcontroller GmbH & Co. KG * -* * -* Internet: www.segger.com Support: support@segger.com * -* * -********************************************************************** - -** emWin V5.44 - Graphical user interface for embedded applications ** -All Intellectual Property rights in the Software belongs to SEGGER. -emWin is protected by international copyright laws. Knowledge of the -source code may not be used to write a similar product. This file may -only be used in accordance with the following terms: - -The software has been licensed to STMicroelectronics International -N.V. a Dutch company with a Swiss branch and its headquarters in Plan- -les-Ouates, Geneva, 39 Chemin du Champ des Filles, Switzerland for the -purposes of creating libraries for ARM Cortex-M-based 32-bit microcon_ -troller products commercialized by Licensee only, sublicensed and dis_ -tributed under the terms and conditions of the End User License Agree_ -ment supplied by STMicroelectronics International N.V. -Full source code is available at: www.segger.com - -We appreciate your understanding and fairness. ----------------------------------------------------------------------- -File : LCDConf.c -Purpose : Display driver configuration file ----------------------------END-OF-HEADER------------------------------ -*/ - -/** - ****************************************************************************** - * @file LCDConf_stm3210c_eval.c - * @author MCD Application Team - * @brief Driver for STM3210C-EVAL RevC board LCD - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2018 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license SLA0044, - * the "License"; You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * http://www.st.com/SLA0044 - * - ****************************************************************************** - */ - -#include "GUI.h" -#include "GUIDRV_FlexColor.h" -#include "main.h" -#include "ili9320/ili9320.h" -#include "ili9325/ili9325.h" - -/********************************************************************* -* -* Layer configuration (to be modified) -* -********************************************************************** -*/ - -// -// Physical display size -// -#define XSIZE_PHYS 240 -#define YSIZE_PHYS 320 - -/********************************************************************* -* -* Configuration checking -* -********************************************************************** -*/ -#ifndef VXSIZE_PHYS -#define VXSIZE_PHYS XSIZE_PHYS -#endif -#ifndef VYSIZE_PHYS -#define VYSIZE_PHYS YSIZE_PHYS -#endif -#ifndef XSIZE_PHYS -#error Physical X size of display is not defined! -#endif -#ifndef YSIZE_PHYS -#error Physical Y size of display is not defined! -#endif -#ifndef GUICC_565 -#error Color conversion not defined! -#endif -#ifndef GUIDRV_FLEXCOLOR -#error No display driver defined! -#endif - -/********************************************************************* -* -* Defines, sfrs -* -********************************************************************** -*/ -// -// COG interface register addr. -// - -typedef struct -{ - __IO uint16_t REG; - __IO uint16_t RAM; - -} LCD_CONTROLLER_TypeDef; - -/********************************************************************* -* -* Local functions -* -********************************************************************** -*/ -static void LCD_LL_Init(void); - - -/******************************************************************** -* -* LcdWriteReg -* -* Function description: -* Sets display register -*/ -static void LcdWriteReg(U16 Data) -{ - LCD_IO_WriteReg((uint8_t)Data); -} - -/******************************************************************** -* -* LcdWriteData -* -* Function description: -* Writes a value to a display register -*/ -static void LcdWriteData(U16 Data) -{ - LCD_IO_WriteMultipleData((uint8_t*)&Data, 2); -} - -/******************************************************************** -* -* LcdWriteDataMultiple -* -* Function description: -* Writes multiple values to a display register. -*/ -static void LcdWriteDataMultiple(U16 *pData, int NumItems) -{ - LCD_IO_WriteMultipleData((uint8_t *) pData, 2 * NumItems); -} - -/******************************************************************** -* -* LcdReadDataMultiple -* -* Function description: -* Reads multiple values from a display register. -*/ -static void LcdReadDataMultiple(U16 *pData, int NumItems) -{ - while (NumItems--) - { - //*pData++ = LCD_IO_ReadData(); - while (1); - } -} - -/********************************************************************* -* -* Public functions -* -********************************************************************** -*/ - -/** - * @brief Initializes the LCD. - * @param None - * @retval LCD state - */ -static void LCD_LL_Init(void) -{ - if (ili9320_drv.ReadID() == ILI9320_ID) - { - ili9320_Init(); - } - else - { - ili9325_Init(); - } -} - -/********************************************************************* -* -* LCD_X_Config -* -* Function description: -* Called during the initialization process in order to set up the -* display driver configuration. -* -*/ -void LCD_X_Config(void) -{ - GUI_DEVICE *pDevice; - CONFIG_FLEXCOLOR Config = {0}; - GUI_PORT_API PortAPI = {0}; - // - // Set display driver and color conversion - // - pDevice = GUI_DEVICE_CreateAndLink(GUIDRV_FLEXCOLOR, GUICC_565, 0, 0); - // - // Display driver configuration, required for Lin-driver - // - LCD_SetSizeEx(0, XSIZE_PHYS , YSIZE_PHYS); - LCD_SetVSizeEx(0, VXSIZE_PHYS, VYSIZE_PHYS); - // - // Orientation - // - if (ili9320_drv.ReadID() == ILI9320_ID) - { - Config.Orientation = GUI_SWAP_XY | GUI_MIRROR_Y; - } - else - { - Config.Orientation = GUI_SWAP_XY | GUI_MIRROR_Y; - } - - GUIDRV_FlexColor_Config(pDevice, &Config); - // - // Set controller and operation mode - // - PortAPI.pfWrite16_A0 = LcdWriteReg; - PortAPI.pfWrite16_A1 = LcdWriteData; - PortAPI.pfWriteM16_A1 = LcdWriteDataMultiple; - PortAPI.pfReadM16_A1 = LcdReadDataMultiple; - - // Find the current LCD and initialize GUIDRV - if (ili9320_drv.ReadID() == ILI9320_ID) - { - GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66708, GUIDRV_FLEXCOLOR_M16C0B16); - } - else - { - GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66708, GUIDRV_FLEXCOLOR_M16C0B16); - } -} - -/********************************************************************* -* -* LCD_X_DisplayDriver -* -* Function description: -* This function is called by the display driver for several purposes. -* To support the according task the routine needs to be adapted to -* the display controller. Please note that the commands marked with -* 'optional' are not cogently required and should only be adapted if -* the display controller supports these features. -* -* Parameter: -* LayerIndex - Index of layer to be configured -* Cmd - Please refer to the details in the switch statement below -* pData - Pointer to a LCD_X_DATA structure -* -* Return Value: -* < -1 - Error -* -1 - Command not handled -* 0 - Ok -*/ -int LCD_X_DisplayDriver(unsigned LayerIndex, unsigned Cmd, void *pData) -{ - int r; - (void) LayerIndex; - (void) pData; - - switch (Cmd) - { - case LCD_X_INITCONTROLLER: - { - - LCD_LL_Init(); - - return 0; - } - default: - r = -1; - } - return r; -} - - -/*************************** End of file ****************************/ - diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/main.c b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/main.c deleted file mode 100644 index 38c50c6..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/main.c +++ /dev/null @@ -1,193 +0,0 @@ -/** - ****************************************************************************** - * @file main.c - * @author MCD Application Team - * @brief This file provides main program functions - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" -#include "WM.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ - -/* Private function prototypes -----------------------------------------------*/ -static void BSP_Config(void); -void SystemClock_Config(void); -void BSP_Background(void); - -extern void MainTask(void); - -/* Private functions ---------------------------------------------------------*/ - -/** - * @brief Main program. - * @param None - * @retval None - */ -int main(void) -{ - /* STM32F107xC HAL library initialization: - - Configure the Flash prefetch - - Systick timer is configured by default as source of time base, but user - can eventually implement his proper time base source (a general purpose - timer for example or other time source), keeping in mind that Time base - duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and - handled in milliseconds basis. - - Set NVIC Group Priority to 4 - - Low Level Initialization - */ - HAL_Init(); - - /* Configure the system clock to 72 MHz */ - SystemClock_Config(); - - /* Initialize LEDs */ - BSP_Config(); - - /* Init the STemWin GUI Library */ - GUI_Init(); - /* Activate the use of memory device feature */ - WM_SetCreateFlags(WM_CF_MEMDEV); - - MainTask(); - - /* Infinite loop */ - for(;;); -} - -/** - * @brief Initializes the STM3210C-EVAL RevC's LCD and LEDs resources. - * @param None - * @retval None - */ -static void BSP_Config(void) -{ - /* Initialize STM3210C-EVAL RevC's LEDs */ - BSP_LED_Init(LED1); - BSP_LED_Init(LED2); - BSP_LED_Init(LED3); - BSP_LED_Init(LED4); - - /* Enable the CRC Module */ - __HAL_RCC_CRC_CLK_ENABLE(); -} - -/** -* @brief BSP_Background. -* @param None -* @retval None -*/ -void BSP_Background(void) -{ - static uint32_t LED_ticks = 0; - - if ( LED_ticks++ > 100 ) - { - LED_ticks = 0; - - /* toggle LED1..4 each 100ms */ - BSP_LED_Toggle(LED1); - BSP_LED_Toggle(LED2); - BSP_LED_Toggle(LED3); - BSP_LED_Toggle(LED4); - } - -} - - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (HSE) - * SYSCLK(Hz) = 72000000 - * HCLK(Hz) = 72000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 2 - * APB2 Prescaler = 1 - * HSE Frequency(Hz) = 25000000 - * HSE PREDIV1 = 5 - * HSE PREDIV2 = 5 - * PLL2MUL = 8 - * Flash Latency(WS) = 2 - * @param None - * @retval None - */ -void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef clkinitstruct = {0}; - RCC_OscInitTypeDef oscinitstruct = {0}; - - /* Configure PLLs ------------------------------------------------------*/ - /* PLL2 configuration: PLL2CLK = (HSE / HSEPrediv2Value) * PLL2MUL = (25 / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2CLK / HSEPredivValue = 40 / 5 = 8 MHz */ - /* PLL configuration: PLLCLK = PREDIV1CLK * PLLMUL = 8 * 9 = 72 MHz */ - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - oscinitstruct.HSEState = RCC_HSE_ON; - oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV5; - oscinitstruct.Prediv1Source = RCC_PREDIV1_SOURCE_PLL2; - oscinitstruct.PLL.PLLState = RCC_PLL_ON; - oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL9; - oscinitstruct.PLL2.PLL2State = RCC_PLL2_ON; - oscinitstruct.PLL2.PLL2MUL = RCC_PLL2_MUL8; - oscinitstruct.PLL2.HSEPrediv2Value = RCC_HSE_PREDIV2_DIV5; - if (HAL_RCC_OscConfig(&oscinitstruct)!= HAL_OK) - { - /* Initialization Error */ - while(1); - } - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1; - clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2; - if (HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2)!= HAL_OK) - { - /* Initialization Error */ - while(1); - } -} - - -#ifdef USE_FULL_ASSERT -/** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ -void assert_failed(uint8_t* file, uint32_t line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} -#endif - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/stm32f1xx_it.c b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/stm32f1xx_it.c deleted file mode 100644 index 0940c80..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/stm32f1xx_it.c +++ /dev/null @@ -1,160 +0,0 @@ -/** - ****************************************************************************** - * @file STemWin\STemWin_HelloWorld\Src\stm32f1xx_it.c - * @author MCD Application Team - * @brief Main Interrupt Service Routines. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" -#include "stm32f1xx_it.h" - -#include "GUI.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -extern volatile GUI_TIMER_TIME OS_TimeMS; -extern void BSP_Background(void); - -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************/ -/* Cortex-M3 Processor Exceptions Handlers */ -/******************************************************************************/ - -/** - * @brief This function handles NMI exception. - * @param None - * @retval None - */ -void NMI_Handler(void) -{ -} - -/** - * @brief This function handles Hard Fault exception. - * @param None - * @retval None - */ -void HardFault_Handler(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Memory Manage exception. - * @param None - * @retval None - */ -void MemManage_Handler(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Bus Fault exception. - * @param None - * @retval None - */ -void BusFault_Handler(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Usage Fault exception. - * @param None - * @retval None - */ -void UsageFault_Handler(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles SVCall exception. - * @param None - * @retval None - */ -void SVC_Handler(void) -{ -} - -/** - * @brief This function handles Debug Monitor exception. - * @param None - * @retval None - */ -void DebugMon_Handler(void) -{ -} - -/** - * @brief This function handles PendSVC exception. - * @param None - * @retval None - */ -void PendSV_Handler(void) -{ -} - -/** - * @brief This function handles SysTick Handler. - * @param None - * @retval None - */ -void SysTick_Handler(void) -{ - /* Update the LocalTime by adding 1 ms each SysTick interrupt */ - HAL_IncTick(); - - OS_TimeMS++; - - BSP_Background(); -} - -/******************************************************************************/ -/* STM32F1xx Peripherals Interrupt Handlers */ -/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ -/* available peripheral interrupt handler's name please refer to the startup */ -/* file (startup_stm32f1xx.s). */ -/******************************************************************************/ - -/** - * @brief This function handles PPP interrupt request. - * @param None - * @retval None - */ -/*void PPP_IRQHandler(void) -{ -}*/ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/system_stm32f1xx.c b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/system_stm32f1xx.c deleted file mode 100644 index 4f107c8..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/system_stm32f1xx.c +++ /dev/null @@ -1,428 +0,0 @@ -/** - ****************************************************************************** - * @file system_stm32f1xx.c - * @author MCD Application Team - * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. - * - * 1. This file provides two functions and one global variable to be called from - * user application: - * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier - * factors, AHB/APBx prescalers and Flash settings). - * This function is called at startup just after reset and - * before branch to main program. This call is made inside - * the "startup_stm32f1xx_xx.s" file. - * - * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used - * by the user application to setup the SysTick - * timer or configure other parameters. - * - * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must - * be called whenever the core clock is changed - * during program execution. - * - * 2. After each device reset the HSI (8 MHz) is used as system clock source. - * Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to - * configure the system clock before to branch to main program. - * - * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on - * the product used), refer to "HSE_VALUE". - * When HSE is used as system clock source, directly or through PLL, and you - * are using different crystal you have to adapt the HSE value to your own - * configuration. - * - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f1xx_system - * @{ - */ - -/** @addtogroup STM32F1xx_System_Private_Includes - * @{ - */ - -#include "stm32f1xx.h" - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_Defines - * @{ - */ - -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz. - This value can be provided and adapted by the user application. */ -#endif /* HSE_VALUE */ - -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz. - This value can be provided and adapted by the user application. */ -#endif /* HSI_VALUE */ - -/*!< Uncomment the following line if you need to use external SRAM */ -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) -/* #define DATA_IN_ExtSRAM */ -#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ - -/*!< Uncomment the following line if you need to relocate your vector Table in - Internal SRAM. */ -/* #define VECT_TAB_SRAM */ -#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. - This value must be a multiple of 0x200. */ - - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_Variables - * @{ - */ - /* This variable is updated in three ways: - 1) by calling CMSIS function SystemCoreClockUpdate() - 2) by calling HAL API function HAL_RCC_GetHCLKFreq() - 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency - Note: If you use this function to configure the system clock; then there - is no need to call the 2 first functions listed above, since SystemCoreClock - variable is updated automatically. - */ -uint32_t SystemCoreClock = 16000000; -const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; -const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4}; -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes - * @{ - */ - -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) -#ifdef DATA_IN_ExtSRAM - static void SystemInit_ExtMemCtl(void); -#endif /* DATA_IN_ExtSRAM */ -#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_Functions - * @{ - */ - -/** - * @brief Setup the microcontroller system - * Initialize the Embedded Flash Interface, the PLL and update the - * SystemCoreClock variable. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -void SystemInit (void) -{ - /* Reset the RCC clock configuration to the default reset state(for debug purpose) */ - /* Set HSION bit */ - RCC->CR |= (uint32_t)0x00000001; - - /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ -#if !defined(STM32F105xC) && !defined(STM32F107xC) - RCC->CFGR &= (uint32_t)0xF8FF0000; -#else - RCC->CFGR &= (uint32_t)0xF0FF0000; -#endif /* STM32F105xC */ - - /* Reset HSEON, CSSON and PLLON bits */ - RCC->CR &= (uint32_t)0xFEF6FFFF; - - /* Reset HSEBYP bit */ - RCC->CR &= (uint32_t)0xFFFBFFFF; - - /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ - RCC->CFGR &= (uint32_t)0xFF80FFFF; - -#if defined(STM32F105xC) || defined(STM32F107xC) - /* Reset PLL2ON and PLL3ON bits */ - RCC->CR &= (uint32_t)0xEBFFFFFF; - - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x00FF0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#elif defined(STM32F100xB) || defined(STM32F100xE) - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#else - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; -#endif /* STM32F105xC */ - -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) - #ifdef DATA_IN_ExtSRAM - SystemInit_ExtMemCtl(); - #endif /* DATA_IN_ExtSRAM */ -#endif - -#ifdef VECT_TAB_SRAM - SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ -#else - SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ -#endif -} - -/** - * @brief Update SystemCoreClock variable according to Clock Register Values. - * The SystemCoreClock variable contains the core clock (HCLK), it can - * be used by the user application to setup the SysTick timer or configure - * other parameters. - * - * @note Each time the core clock (HCLK) changes, this function must be called - * to update SystemCoreClock variable value. Otherwise, any configuration - * based on this variable will be incorrect. - * - * @note - The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * - * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) - * - * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) - * - * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) - * or HSI_VALUE(*) multiplied by the PLL factors. - * - * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value - * 8 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * - * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value - * 8 MHz or 25 MHz, depending on the product used), user has to ensure - * that HSE_VALUE is same as the real frequency of the crystal used. - * Otherwise, this function may have wrong result. - * - * - The result of this function could be not correct when using fractional - * value for HSE crystal. - * @param None - * @retval None - */ -void SystemCoreClockUpdate (void) -{ - uint32_t tmp = 0, pllmull = 0, pllsource = 0; - -#if defined(STM32F105xC) || defined(STM32F107xC) - uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; -#endif /* STM32F105xC */ - -#if defined(STM32F100xB) || defined(STM32F100xE) - uint32_t prediv1factor = 0; -#endif /* STM32F100xB or STM32F100xE */ - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & RCC_CFGR_SWS; - - switch (tmp) - { - case 0x00: /* HSI used as system clock */ - SystemCoreClock = HSI_VALUE; - break; - case 0x04: /* HSE used as system clock */ - SystemCoreClock = HSE_VALUE; - break; - case 0x08: /* PLL used as system clock */ - - /* Get PLL clock source and multiplication factor ----------------------*/ - pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; - pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; - -#if !defined(STM32F105xC) && !defined(STM32F107xC) - pllmull = ( pllmull >> 18) + 2; - - if (pllsource == 0x00) - { - /* HSI oscillator clock divided by 2 selected as PLL clock entry */ - SystemCoreClock = (HSI_VALUE >> 1) * pllmull; - } - else - { - #if defined(STM32F100xB) || defined(STM32F100xE) - prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; - /* HSE oscillator clock selected as PREDIV1 clock entry */ - SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; - #else - /* HSE selected as PLL clock entry */ - if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET) - {/* HSE oscillator clock divided by 2 */ - SystemCoreClock = (HSE_VALUE >> 1) * pllmull; - } - else - { - SystemCoreClock = HSE_VALUE * pllmull; - } - #endif - } -#else - pllmull = pllmull >> 18; - - if (pllmull != 0x0D) - { - pllmull += 2; - } - else - { /* PLL multiplication factor = PLL input clock * 6.5 */ - pllmull = 13 / 2; - } - - if (pllsource == 0x00) - { - /* HSI oscillator clock divided by 2 selected as PLL clock entry */ - SystemCoreClock = (HSI_VALUE >> 1) * pllmull; - } - else - {/* PREDIV1 selected as PLL clock entry */ - - /* Get PREDIV1 clock source and division factor */ - prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC; - prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; - - if (prediv1source == 0) - { - /* HSE oscillator clock selected as PREDIV1 clock entry */ - SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; - } - else - {/* PLL2 clock selected as PREDIV1 clock entry */ - - /* Get PREDIV2 division factor and PLL2 multiplication factor */ - prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1; - pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; - SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; - } - } -#endif /* STM32F105xC */ - break; - - default: - SystemCoreClock = HSI_VALUE; - break; - } - - /* Compute HCLK clock frequency ----------------*/ - /* Get HCLK prescaler */ - tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; - /* HCLK clock frequency */ - SystemCoreClock >>= tmp; -} - -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) -/** - * @brief Setup the external memory controller. Called in startup_stm32f1xx.s - * before jump to __main - * @param None - * @retval None - */ -#ifdef DATA_IN_ExtSRAM -/** - * @brief Setup the external memory controller. - * Called in startup_stm32f1xx_xx.s/.c before jump to main. - * This function configures the external SRAM mounted on STM3210E-EVAL - * board (STM32 High density devices). This SRAM will be used as program - * data memory (including heap and stack). - * @param None - * @retval None - */ -void SystemInit_ExtMemCtl(void) -{ - __IO uint32_t tmpreg; - /*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is - required, then adjust the Register Addresses */ - - /* Enable FSMC clock */ - RCC->AHBENR = 0x00000114; - - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN); - - /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */ - RCC->APB2ENR = 0x000001E0; - - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN); - - (void)(tmpreg); - -/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/ -/*---------------- SRAM Address lines configuration -------------------------*/ -/*---------------- NOE and NWE configuration --------------------------------*/ -/*---------------- NE3 configuration ----------------------------------------*/ -/*---------------- NBL0, NBL1 configuration ---------------------------------*/ - - GPIOD->CRL = 0x44BB44BB; - GPIOD->CRH = 0xBBBBBBBB; - - GPIOE->CRL = 0xB44444BB; - GPIOE->CRH = 0xBBBBBBBB; - - GPIOF->CRL = 0x44BBBBBB; - GPIOF->CRH = 0xBBBB4444; - - GPIOG->CRL = 0x44BBBBBB; - GPIOG->CRH = 0x44444B44; - -/*---------------- FSMC Configuration ---------------------------------------*/ -/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/ - - FSMC_Bank1->BTCR[4] = 0x00001091; - FSMC_Bank1->BTCR[5] = 0x00110212; -} -#endif /* DATA_IN_ExtSRAM */ -#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/readme.txt b/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/readme.txt deleted file mode 100644 index 23afda3..0000000 --- a/Projects/STM3210C_EVAL/Applications/STemWin/STemWin_HelloWorld/readme.txt +++ /dev/null @@ -1,79 +0,0 @@ -/** - @page STemWin_HelloWorld Readme file - - @verbatim - ******************** (C) COPYRIGHT 2016 STMicroelectronics ******************* - * @file STemWin_HelloWorld/readme.txt - * @author MCD Application Team - * @brief - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 - * - ****************************************************************************** - @endverbatim - - -@par Description - -Simple "Hello World" example based on STemWin. - -The example allows also to run the different Segger samples that can be -downloaded from here: -http://www.segger.com/emwin-samples.html -To do this, user has only to replace the file "Basic_HelloWorld.c" into the -project workspace by the downloaded one. - -Note that the following user files may need to be updated: - LCDConf_stm3210c_eval.c - GUIConf_stm3210c_eval.c -(if for example more GUI allocated memory is needed) - -@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds) - based on variable incremented in SysTick ISR. This implies that if HAL_Delay() is called from - a peripheral ISR process, then the SysTick interrupt must have higher priority (numerically lower) - than the peripheral interrupt. Otherwise the caller ISR process will be blocked. - To change the SysTick interrupt priority you have to use HAL_NVIC_SetPriority() function. - -@note The application need to ensure that the SysTick time base is always set to 1 millisecond - to have correct HAL operation. - -@par Directory contents - - - STemWin/STemWin_HelloWorld/Inc/GUIConf.h Header for GUIConf_stm3210c_eval.c - - STemWin/STemWin_HelloWorld/Inc/LCDConf_stm3210c_eval.h Header for LCDConf_stm3210c_eval.c - - STemWin/STemWin_HelloWorld/Inc/stm32f1xx_hal_conf.h HAL configuration file - - STemWin/STemWin_HelloWorld/Inc/stm32f1xx_it.h Interrupt handlers header file - - STemWin/STemWin_HelloWorld/Inc/main.h Header for main.c module - - STemWin/STemWin_HelloWorld/Src/stm32f1xx_it.c Interrupt handlers - - STemWin/STemWin_HelloWorld/Src/BASIC_HelloWorld.c Simple demo drawing "Hello world" - - STemWin/STemWin_HelloWorld/Src/GUIConf_stm3210c_eval.c Display controller initialization - - STemWin/STemWin_HelloWorld/Src/LCDConf_stm3210c_eval.c Configuration file for the GUI library - - STemWin/STemWin_HelloWorld/Src/main.c Main program - - STemWin/STemWin_HelloWorld/Src/system_stm32f1xx.c STM32F1xx system source file - - -@par Hardware and Software environment - - - This example runs on STM32F107xC devices. - - - This example has been tested with STM3210C-EVAL RevC board and can be - easily tailored to any other supported device and development board. - - -@par How to use it ? - -In order to make the program work, you must do the following : - - Open your preferred toolchain - - Rebuild all files and load your image into target memory - - Run the example - - *

© COPYRIGHT STMicroelectronics

- */ diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.ewd b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.ewd deleted file mode 100644 index cb9590a..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.ewd +++ /dev/null @@ -1,1419 +0,0 @@ - - - 3 - - STM3210E_EVAL - - ARM - - 1 - - C-SPY - 2 - - 29 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ARMSIM_ID - 2 - - 1 - 1 - 1 - - - - - - - - CADI_ID - 2 - - 0 - 1 - 1 - - - - - - - - - CMSISDAP_ID - 2 - - 4 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GDBSERVER_ID - 2 - - 0 - 1 - 1 - - - - - - - - - - - IJET_ID - 2 - - 8 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - JLINK_ID - 2 - - 16 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - LMIFTDI_ID - 2 - - 2 - 1 - 1 - - - - - - - - - - PEMICRO_ID - 2 - - 3 - 1 - 1 - - - - - - - - STLINK_ID - 2 - - 4 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - THIRDPARTY_ID - 2 - - 0 - 1 - 1 - - - - - - - - TIFET_ID - 2 - - 1 - 1 - 1 - - - - - - - - - - - - - - - - - - - XDS100_ID - 2 - - 6 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin - 0 - - - $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin - 1 - - - $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin - 0 - - - $EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin - 0 - - - $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin - 0 - - - - diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.ewp b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.ewp deleted file mode 100644 index 035eeb5..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.ewp +++ /dev/null @@ -1,1153 +0,0 @@ - - - 3 - - STM3210E_EVAL - - ARM - - 1 - - General - 3 - - 30 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ICCARM - 2 - - 34 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AARM - 2 - - 10 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - OBJCOPY - 0 - - 1 - 1 - 1 - - - - - - - - - CUSTOM - 3 - - - - 0 - - - - BICOMP - 0 - - - - BUILDACTION - 1 - - - - - - - ILINK - 0 - - 20 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IARCHIVE - 0 - - 0 - 1 - 1 - - - - - - - BILINK - 0 - - - - - Application - - EWARM - - $PROJ_DIR$\startup_stm32f103xg.s - - - - User - - $PROJ_DIR$\..\Src\BASIC_HelloWorld.c - - - $PROJ_DIR$\..\Src\main.c - - - $PROJ_DIR$\..\Src\stm32f1xx_it.c - - - - - Doc - - $PROJ_DIR$\..\readme.txt - - - - Drivers - - BSP - - Components - - hx8347d - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\BSP\Components\hx8347d\hx8347d.c - - - - ili9320 - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\BSP\Components\ili9320\ili9320.c - - - - spfd5408 - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\BSP\Components\spfd5408\spfd5408.c - - - - - STM3210E_EVAL - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\BSP\STM3210E_EVAL\stm3210e_eval.c - - - - - CMSIS - - $PROJ_DIR$\..\Src\system_stm32f1xx.c - - - - STM32F1xx_HAL_Driver - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.c - - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cortex.c - - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_dma.c - - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio.c - - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc.c - - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc_ex.c - - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_spi.c - - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_sram.c - - - $PROJ_DIR$\..\..\..\..\..\..\Drivers\STM32F1xx_HAL_Driver\Src\stm32f1xx_ll_fsmc.c - - - - - Middlewares - - STemWin - - Config - - $PROJ_DIR$\..\Src\GUIConf_stm3210e_eval.c - - - $PROJ_DIR$\..\Src\LCDConf_stm32l10e_eval.c - - - - Lib - - $PROJ_DIR$\..\..\..\..\..\..\Middlewares\ST\STemWin\Lib\STemWin_CM3_wc32.a - - - - OS - - $PROJ_DIR$\..\..\..\..\..\..\Middlewares\ST\STemWin\OS\GUI_X.c - - - - - diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.eww b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.eww deleted file mode 100644 index e0fd14b..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/Project.eww +++ /dev/null @@ -1,10 +0,0 @@ - - - - - $WS_DIR$\Project.ewp - - - - - diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/startup_stm32f103xg.s b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/startup_stm32f103xg.s deleted file mode 100644 index 20820fb..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/startup_stm32f103xg.s +++ /dev/null @@ -1,495 +0,0 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** -;* File Name : startup_stm32f103xg.s -;* Author : MCD Application Team -;* Description : STM32F103xG Performances Line Devices vector table for EWARM -;* toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == __iar_program_start, -;* - Set the vector table entries with the exceptions ISR address, -;* After Reset the Cortex-M3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;****************************************************************************** -;* @attention -;* -;*

© Copyright (c) 2016 STMicroelectronics. -;* All rights reserved.

-;* -;* This software component is licensed by ST under BSD 3-Clause license, -;* the "License"; You may not use this file except in compliance with the -;* License. You may obtain a copy of the License at: -;* opensource.org/licenses/BSD-3-Clause -;* -;****************************************************************************** -; -; -; The modules in this file are included in the libraries, and may be replaced -; by any user-defined modules that define the PUBLIC symbol _program_start or -; a user defined start symbol. -; To override the cstartup defined in the library, simply add your modified -; version to the workbench project. -; -; The vector table is normally located at address 0. -; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. -; The name "__vector_table" has special meaning for C-SPY: -; it is where the SP start value is found, and the NVIC vector -; table register (VTOR) is initialized to this address if != 0. -; -; Cortex-M version -; - - MODULE ?cstartup - - ;; Forward declaration of sections. - SECTION CSTACK:DATA:NOROOT(3) - - SECTION .intvec:CODE:NOROOT(2) - - EXTERN __iar_program_start - EXTERN SystemInit - PUBLIC __vector_table - - DATA - -__vector_table - DCD sfe(CSTACK) - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 & ADC2 - DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX - DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 - DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10 - DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C2 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line - DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend - DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12 - DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13 - DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14 - DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare - DCD ADC3_IRQHandler ; ADC3 - DCD FSMC_IRQHandler ; FSMC - DCD SDIO_IRQHandler ; SDIO - DCD TIM5_IRQHandler ; TIM5 - DCD SPI3_IRQHandler ; SPI3 - DCD UART4_IRQHandler ; UART4 - DCD UART5_IRQHandler ; UART5 - DCD TIM6_IRQHandler ; TIM6 - DCD TIM7_IRQHandler ; TIM7 - DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 - DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 - DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 - DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;; Default interrupt handlers. -;; - THUMB - - PUBWEAK Reset_Handler - SECTION .text:CODE:REORDER:NOROOT(2) -Reset_Handler - LDR R0, =SystemInit - BLX R0 - LDR R0, =__iar_program_start - BX R0 - - PUBWEAK NMI_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -NMI_Handler - B NMI_Handler - - PUBWEAK HardFault_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -HardFault_Handler - B HardFault_Handler - - PUBWEAK MemManage_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -MemManage_Handler - B MemManage_Handler - - PUBWEAK BusFault_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -BusFault_Handler - B BusFault_Handler - - PUBWEAK UsageFault_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -UsageFault_Handler - B UsageFault_Handler - - PUBWEAK SVC_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -SVC_Handler - B SVC_Handler - - PUBWEAK DebugMon_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -DebugMon_Handler - B DebugMon_Handler - - PUBWEAK PendSV_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -PendSV_Handler - B PendSV_Handler - - PUBWEAK SysTick_Handler - SECTION .text:CODE:REORDER:NOROOT(1) -SysTick_Handler - B SysTick_Handler - - PUBWEAK WWDG_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -WWDG_IRQHandler - B WWDG_IRQHandler - - PUBWEAK PVD_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -PVD_IRQHandler - B PVD_IRQHandler - - PUBWEAK TAMPER_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TAMPER_IRQHandler - B TAMPER_IRQHandler - - PUBWEAK RTC_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -RTC_IRQHandler - B RTC_IRQHandler - - PUBWEAK FLASH_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -FLASH_IRQHandler - B FLASH_IRQHandler - - PUBWEAK RCC_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -RCC_IRQHandler - B RCC_IRQHandler - - PUBWEAK EXTI0_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -EXTI0_IRQHandler - B EXTI0_IRQHandler - - PUBWEAK EXTI1_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -EXTI1_IRQHandler - B EXTI1_IRQHandler - - PUBWEAK EXTI2_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -EXTI2_IRQHandler - B EXTI2_IRQHandler - - PUBWEAK EXTI3_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -EXTI3_IRQHandler - B EXTI3_IRQHandler - - PUBWEAK EXTI4_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -EXTI4_IRQHandler - B EXTI4_IRQHandler - - PUBWEAK DMA1_Channel1_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA1_Channel1_IRQHandler - B DMA1_Channel1_IRQHandler - - PUBWEAK DMA1_Channel2_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA1_Channel2_IRQHandler - B DMA1_Channel2_IRQHandler - - PUBWEAK DMA1_Channel3_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA1_Channel3_IRQHandler - B DMA1_Channel3_IRQHandler - - PUBWEAK DMA1_Channel4_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA1_Channel4_IRQHandler - B DMA1_Channel4_IRQHandler - - PUBWEAK DMA1_Channel5_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA1_Channel5_IRQHandler - B DMA1_Channel5_IRQHandler - - PUBWEAK DMA1_Channel6_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA1_Channel6_IRQHandler - B DMA1_Channel6_IRQHandler - - PUBWEAK DMA1_Channel7_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA1_Channel7_IRQHandler - B DMA1_Channel7_IRQHandler - - PUBWEAK ADC1_2_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -ADC1_2_IRQHandler - B ADC1_2_IRQHandler - - PUBWEAK USB_HP_CAN1_TX_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -USB_HP_CAN1_TX_IRQHandler - B USB_HP_CAN1_TX_IRQHandler - - PUBWEAK USB_LP_CAN1_RX0_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -USB_LP_CAN1_RX0_IRQHandler - B USB_LP_CAN1_RX0_IRQHandler - - PUBWEAK CAN1_RX1_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -CAN1_RX1_IRQHandler - B CAN1_RX1_IRQHandler - - PUBWEAK CAN1_SCE_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -CAN1_SCE_IRQHandler - B CAN1_SCE_IRQHandler - - PUBWEAK EXTI9_5_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -EXTI9_5_IRQHandler - B EXTI9_5_IRQHandler - - PUBWEAK TIM1_BRK_TIM9_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM1_BRK_TIM9_IRQHandler - B TIM1_BRK_TIM9_IRQHandler - - PUBWEAK TIM1_UP_TIM10_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM1_UP_TIM10_IRQHandler - B TIM1_UP_TIM10_IRQHandler - - PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM1_TRG_COM_TIM11_IRQHandler - B TIM1_TRG_COM_TIM11_IRQHandler - - PUBWEAK TIM1_CC_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM1_CC_IRQHandler - B TIM1_CC_IRQHandler - - PUBWEAK TIM2_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM2_IRQHandler - B TIM2_IRQHandler - - PUBWEAK TIM3_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM3_IRQHandler - B TIM3_IRQHandler - - PUBWEAK TIM4_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM4_IRQHandler - B TIM4_IRQHandler - - PUBWEAK I2C1_EV_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -I2C1_EV_IRQHandler - B I2C1_EV_IRQHandler - - PUBWEAK I2C1_ER_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -I2C1_ER_IRQHandler - B I2C1_ER_IRQHandler - - PUBWEAK I2C2_EV_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -I2C2_EV_IRQHandler - B I2C2_EV_IRQHandler - - PUBWEAK I2C2_ER_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -I2C2_ER_IRQHandler - B I2C2_ER_IRQHandler - - PUBWEAK SPI1_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -SPI1_IRQHandler - B SPI1_IRQHandler - - PUBWEAK SPI2_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -SPI2_IRQHandler - B SPI2_IRQHandler - - PUBWEAK USART1_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -USART1_IRQHandler - B USART1_IRQHandler - - PUBWEAK USART2_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -USART2_IRQHandler - B USART2_IRQHandler - - PUBWEAK USART3_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -USART3_IRQHandler - B USART3_IRQHandler - - PUBWEAK EXTI15_10_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -EXTI15_10_IRQHandler - B EXTI15_10_IRQHandler - - PUBWEAK RTC_Alarm_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -RTC_Alarm_IRQHandler - B RTC_Alarm_IRQHandler - - PUBWEAK USBWakeUp_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -USBWakeUp_IRQHandler - B USBWakeUp_IRQHandler - - PUBWEAK TIM8_BRK_TIM12_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM8_BRK_TIM12_IRQHandler - B TIM8_BRK_TIM12_IRQHandler - - PUBWEAK TIM8_UP_TIM13_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM8_UP_TIM13_IRQHandler - B TIM8_UP_TIM13_IRQHandler - - PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM8_TRG_COM_TIM14_IRQHandler - B TIM8_TRG_COM_TIM14_IRQHandler - - PUBWEAK TIM8_CC_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM8_CC_IRQHandler - B TIM8_CC_IRQHandler - - PUBWEAK ADC3_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -ADC3_IRQHandler - B ADC3_IRQHandler - - PUBWEAK FSMC_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -FSMC_IRQHandler - B FSMC_IRQHandler - - PUBWEAK SDIO_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -SDIO_IRQHandler - B SDIO_IRQHandler - - PUBWEAK TIM5_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM5_IRQHandler - B TIM5_IRQHandler - - PUBWEAK SPI3_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -SPI3_IRQHandler - B SPI3_IRQHandler - - PUBWEAK UART4_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -UART4_IRQHandler - B UART4_IRQHandler - - PUBWEAK UART5_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -UART5_IRQHandler - B UART5_IRQHandler - - PUBWEAK TIM6_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM6_IRQHandler - B TIM6_IRQHandler - - PUBWEAK TIM7_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -TIM7_IRQHandler - B TIM7_IRQHandler - - PUBWEAK DMA2_Channel1_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA2_Channel1_IRQHandler - B DMA2_Channel1_IRQHandler - - PUBWEAK DMA2_Channel2_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA2_Channel2_IRQHandler - B DMA2_Channel2_IRQHandler - - PUBWEAK DMA2_Channel3_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA2_Channel3_IRQHandler - B DMA2_Channel3_IRQHandler - - PUBWEAK DMA2_Channel4_5_IRQHandler - SECTION .text:CODE:REORDER:NOROOT(1) -DMA2_Channel4_5_IRQHandler - B DMA2_Channel4_5_IRQHandler - - - END - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/stm32f103xg_flash.icf b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/stm32f103xg_flash.icf deleted file mode 100644 index acb6651..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/EWARM/stm32f103xg_flash.icf +++ /dev/null @@ -1,31 +0,0 @@ -/*###ICF### Section handled by ICF editor, don't touch! ****/ -/*-Editor annotation file-*/ -/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ -/*-Specials-*/ -define symbol __ICFEDIT_intvec_start__ = 0x08000000; -/*-Memory Regions-*/ -define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ; -define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF; -define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; -define symbol __ICFEDIT_region_RAM_end__ = 0x20017FFF; -/*-Sizes-*/ -define symbol __ICFEDIT_size_cstack__ = 0x400; -define symbol __ICFEDIT_size_heap__ = 0x200; -/**** End of ICF editor section. ###ICF###*/ - - -define memory mem with size = 4G; -define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; -define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; - -define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; -define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; - -initialize by copy { readwrite }; -do not initialize { section .noinit }; - -place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; - -place in ROM_region { readonly }; -place in RAM_region { readwrite, - block CSTACK, block HEAP }; diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/GUIConf.h b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/GUIConf.h deleted file mode 100644 index 06f3bf3..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/GUIConf.h +++ /dev/null @@ -1,91 +0,0 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH & Co. KG * -* Solutions for real time microcontroller applications * -********************************************************************** -* * -* (c) 1996 - 2017 SEGGER Microcontroller GmbH & Co. KG * -* * -* Internet: www.segger.com Support: support@segger.com * -* * -********************************************************************** - -** emWin V5.44 - Graphical user interface for embedded applications ** -All Intellectual Property rights in the Software belongs to SEGGER. -emWin is protected by international copyright laws. Knowledge of the -source code may not be used to write a similar product. This file may -only be used in accordance with the following terms: - -The software has been licensed to STMicroelectronics International -N.V. a Dutch company with a Swiss branch and its headquarters in Plan- -les-Ouates, Geneva, 39 Chemin du Champ des Filles, Switzerland for the -purposes of creating libraries for ARM Cortex-M-based 32-bit microcon_ -troller products commercialized by Licensee only, sublicensed and dis_ -tributed under the terms and conditions of the End User License Agree_ -ment supplied by STMicroelectronics International N.V. -Full source code is available at: www.segger.com - -We appreciate your understanding and fairness. ----------------------------------------------------------------------- -File : GUIConf.h -Purpose : Configures emWins abilities, fonts etc. ----------------------------------------------------------------------- -*/ - -/** - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2018 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license SLA0044, - * the "License"; You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * http://www.st.com/SLA0044 - * - ****************************************************************************** - */ - -#ifndef GUICONF_H -#define GUICONF_H - -/********************************************************************* -* -* Multi layer/display support -*/ -#define GUI_NUM_LAYERS 2 // Maximum number of available layers - -/********************************************************************* -* -* Multi tasking support -*/ -#ifdef OS_SUPPORT - #define GUI_OS (1) // Compile with multitasking support -#else - #define GUI_OS (0) -#endif - -/********************************************************************* -* -* Configuration of touch support -*/ -#ifndef GUI_SUPPORT_TOUCH - #define GUI_SUPPORT_TOUCH (1) // Support touchscreen -#endif - -/********************************************************************* -* -* Default font -*/ -#define GUI_DEFAULT_FONT &GUI_Font6x8 - -/********************************************************************* -* -* Configuration of available packages -*/ -#define GUI_SUPPORT_MOUSE (1) /* Support a mouse */ -#define GUI_WINSUPPORT (1) /* Use window manager */ -#define GUI_SUPPORT_MEMDEV (1) /* Memory device package available */ -#define GUI_SUPPORT_DEVICES (1) /* Enable use of device pointers */ - -#endif /* Avoid multiple inclusion */ diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/LCDConf_stm3210e_eval.h b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/LCDConf_stm3210e_eval.h deleted file mode 100644 index 92d94b2..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/LCDConf_stm3210e_eval.h +++ /dev/null @@ -1,58 +0,0 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH & Co. KG * -* Solutions for real time microcontroller applications * -********************************************************************** -* * -* (c) 1996 - 2017 SEGGER Microcontroller GmbH & Co. KG * -* * -* Internet: www.segger.com Support: support@segger.com * -* * -********************************************************************** - -** emWin V5.44 - Graphical user interface for embedded applications ** -All Intellectual Property rights in the Software belongs to SEGGER. -emWin is protected by international copyright laws. Knowledge of the -source code may not be used to write a similar product. This file may -only be used in accordance with the following terms: - -The software has been licensed to STMicroelectronics International -N.V. a Dutch company with a Swiss branch and its headquarters in Plan- -les-Ouates, Geneva, 39 Chemin du Champ des Filles, Switzerland for the -purposes of creating libraries for ARM Cortex-M-based 32-bit microcon_ -troller products commercialized by Licensee only, sublicensed and dis_ -tributed under the terms and conditions of the End User License Agree_ -ment supplied by STMicroelectronics International N.V. -Full source code is available at: www.segger.com - -We appreciate your understanding and fairness. ----------------------------------------------------------------------- -File : LCDConf.h -Purpose : Display driver configuration file ----------------------------END-OF-HEADER------------------------------ -*/ - -/** - ****************************************************************************** - * @file LCDConf.h - * @author MCD Application Team - * @brief Display driver configuration file - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2018 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license SLA0044, - * the "License"; You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * http://www.st.com/SLA0044 - * - ****************************************************************************** - */ - -#ifndef LCDCONF_H -#define LCDCONF_H - -#endif /* LCDCONF_H */ - -/*************************** End of file ****************************/ diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/main.h b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/main.h deleted file mode 100644 index b994571..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/main.h +++ /dev/null @@ -1,35 +0,0 @@ -/** - ****************************************************************************** - * @file main.h - * @author MCD Application Team - * @brief Header for main.c module - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __MAIN_H -#define __MAIN_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" -#include "GUI.h" - -/* EVAL includes component */ -#include "stm3210e_eval.h" -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -#endif /* __MAIN_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/stm32f1xx_hal_conf.h b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/stm32f1xx_hal_conf.h deleted file mode 100644 index c8bf229..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/stm32f1xx_hal_conf.h +++ /dev/null @@ -1,401 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_CONF_H -#define __STM32F1xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_ETH_MODULE_ENABLED */ -/* #define HAL_EXTI_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -#define HAL_NOR_MODULE_ENABLED -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_PCD_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -#define HAL_SPI_MODULE_ENABLED -#define HAL_SRAM_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -/* #define HAL_UART_MODULE_ENABLED */ -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ - -/* ########################## Oscillator Values adaptation ####################*/ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) -#if defined(USE_STM3210C_EVAL) - #define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */ -#else - #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ -#endif -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz */ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ - -/** - * @brief External Low Speed oscillator (LSE) value. - * This value is used by the UART, RTC HAL module to compute the system frequency - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE 3300U /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ - -#define ETH_RXBUFNB 8U /* 8 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848 PHY Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ -#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ -#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - -#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ -#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ - -#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ -#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ - -#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ -#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver - * Activated: CRC code is present inside driver - * Deactivated: CRC code cleaned from driver - */ - -#define USE_SPI_CRC 1U - - - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f1xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f1xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f1xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f1xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f1xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f1xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "Legacy/stm32f1xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f1xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f1xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f1xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f1xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f1xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f1xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f1xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f1xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f1xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f1xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f1xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f1xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f1xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f1xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f1xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f1xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f1xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f1xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f1xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f1xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f1xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f1xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f1xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f1xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f1xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f1xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/stm32f1xx_it.h b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/stm32f1xx_it.h deleted file mode 100644 index f8fff48..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Inc/stm32f1xx_it.h +++ /dev/null @@ -1,50 +0,0 @@ -/** - ****************************************************************************** - * @file STemWin\STemWin_HelloWorld\Inc\stm32f1xx_it.h - * @author MCD Application Team - * @brief This file contains the headers of the interrupt handlers. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_IT_H -#define __STM32F1xx_IT_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMI_Handler(void); -void HardFault_Handler(void); -void MemManage_Handler(void); -void BusFault_Handler(void); -void UsageFault_Handler(void); -void SVC_Handler(void); -void DebugMon_Handler(void); -void PendSV_Handler(void); -void SysTick_Handler(void); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_IT_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/Project.uvoptx b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/Project.uvoptx deleted file mode 100644 index b374ad0..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/Project.uvoptx +++ /dev/null @@ -1,551 +0,0 @@ - - - - 1.0 - -
### uVision Project, (C) Keil Software
- - - *.c - *.s*;*.src - *.obj; *.o - *.lib;*.a* - *.txt; *.h; *.inc - *.plm - *.cpp - 0 - - - - 0 - 0 - - - - STM3210E_EVAL - 0x4 - ARM-ADS - - 8000000 - - 1 - 1 - 0 - 1 - 0 - - - 1 - 65535 - 0 - 0 - 0 - - - 79 - 66 - 8 - - - - 1 - 1 - 1 - 0 - 1 - 1 - 0 - 1 - 0 - 0 - 0 - 0 - - - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - - - 1 - 0 - 1 - - 18 - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - 1 - 5 - - - - - - - - - - - STLink\ST-LINKIII-KEIL_SWO.dll - - - - 0 - UL2CM3 - UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32F103ZG$Flash\STM32F10x_1024.FLM)) - - - 0 - ST-LINKIII-KEIL_SWO - -U50FF6A064887565349481287 -O2254 -S1 -C0 -A0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_1024.FLM -FS08000000 -FL0100000 -FP0($$Device:STM32F103ZG$Flash\STM32F10x_1024.FLM) - - - - - 0 - - - 0 - 1 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - - - - 0 - 0 - 0 - - - - - - - - - Middlewares/STemWin/Lib - 1 - 0 - 0 - 0 - - 1 - 1 - 2 - 0 - 0 - 0 - ..\..\..\..\..\..\Middlewares\ST\STemWin\Lib\STemWin_CM3_wc16.a - STemWin_CM3_wc16.a - 0 - 0 - - - - - Middlewares/STemWin/OS - 1 - 0 - 0 - 0 - - 2 - 2 - 1 - 0 - 0 - 0 - ../../../../../../Middlewares/ST/STemWin/OS/GUI_X.c - GUI_X.c - 0 - 0 - - - - - Drivers/BSP/Components/spfd5408 - 1 - 0 - 0 - 0 - - 3 - 3 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/BSP/Components/spfd5408/spfd5408.c - spfd5408.c - 0 - 0 - - - - - Application/User - 0 - 0 - 0 - 0 - - 4 - 4 - 1 - 0 - 0 - 0 - ../Src/BASIC_HelloWorld.c - BASIC_HelloWorld.c - 0 - 0 - - - 4 - 5 - 1 - 0 - 0 - 0 - ../Src/main.c - main.c - 0 - 0 - - - 4 - 6 - 1 - 0 - 0 - 0 - ../Src/stm32f1xx_it.c - stm32f1xx_it.c - 0 - 0 - - - - - Doc - 0 - 0 - 0 - 0 - - 5 - 7 - 5 - 0 - 0 - 0 - ../readme.txt - readme.txt - 0 - 0 - - - - - Drivers/STM32F1xx_HAL_Driver - 0 - 0 - 0 - 0 - - 6 - 8 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c - stm32f1xx_hal_rcc.c - 0 - 0 - - - 6 - 9 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c - stm32f1xx_hal_rcc_ex.c - 0 - 0 - - - 6 - 10 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c - stm32f1xx_hal_cortex.c - 0 - 0 - - - 6 - 11 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c - stm32f1xx_hal.c - 0 - 0 - - - 6 - 12 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c - stm32f1xx_hal_gpio.c - 0 - 0 - - - 6 - 13 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_fsmc.c - stm32f1xx_ll_fsmc.c - 0 - 0 - - - 6 - 14 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c - stm32f1xx_hal_dma.c - 0 - 0 - - - 6 - 15 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c - stm32f1xx_hal_spi.c - 0 - 0 - - - 6 - 16 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sram.c - stm32f1xx_hal_sram.c - 0 - 0 - - - - - Drivers/BSP/Components/ili9320 - 0 - 0 - 0 - 0 - - 7 - 17 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/BSP/Components/ili9320/ili9320.c - ili9320.c - 0 - 0 - - - - - Drivers/CMSIS - 0 - 0 - 0 - 0 - - 8 - 18 - 1 - 0 - 0 - 0 - ../Src/system_stm32f1xx.c - system_stm32f1xx.c - 0 - 0 - - - - - Middlewares/STemWin/Config - 0 - 0 - 0 - 0 - - 9 - 19 - 1 - 0 - 0 - 0 - ../Src/LCDConf_stm32l10e_eval.c - LCDConf_stm32l10e_eval.c - 0 - 0 - - - 9 - 20 - 1 - 0 - 0 - 0 - ../Src/GUIConf_stm3210e_eval.c - GUIConf_stm3210e_eval.c - 0 - 0 - - - - - Drivers/BSP/STM3210E_EVAL - 0 - 0 - 0 - 0 - - 10 - 21 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/BSP/STM3210E_EVAL/stm3210e_eval.c - stm3210e_eval.c - 0 - 0 - - - - - Application/MDK-ARM - 0 - 0 - 0 - 0 - - 11 - 22 - 2 - 0 - 0 - 0 - startup_stm32f103xg.s - startup_stm32f103xg.s - 0 - 0 - - - - - Drivers/BSP/Components/hx8347d - 0 - 0 - 0 - 0 - - 12 - 23 - 1 - 0 - 0 - 0 - ../../../../../../Drivers/BSP/Components/hx8347d/hx8347d.c - hx8347d.c - 0 - 0 - - - - - ::CMSIS - 0 - 0 - 0 - 1 - - - diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/Project.uvprojx b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/Project.uvprojx deleted file mode 100644 index 3f59c48..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/Project.uvprojx +++ /dev/null @@ -1,574 +0,0 @@ - - - - 2.1 - -
### uVision Project, (C) Keil Software
- - - - STM3210E_EVAL - 0x4 - ARM-ADS - 5060422::V5.06 update 4 (build 422)::ARMCC - - - STM32F103ZG - STMicroelectronics - Keil.STM32F1xx_DFP.2.0.0 - http://www.keil.com/pack/ - IRAM(0x20000000-0x20017FFF) IROM(0x8000000-0x80FFFFF) CLOCK(8000000) CPUTYPE("Cortex-M3") - - - - - - - - - - - - - - - $$Device:STM32F103ZG$SVD\STM32F103xx.svd - 0 - 0 - - - - - - - 0 - 0 - 0 - 0 - 1 - - STM3210E_EVAL\ - STM3210E_EVAL - 1 - 0 - 0 - 1 - 1 - - 1 - 0 - 0 - - 0 - 0 - - - 0 - 0 - 0 - 0 - - - 0 - 0 - - - 0 - 0 - 0 - 0 - - - 0 - 0 - - - 0 - 0 - 0 - 0 - - 0 - - - - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 3 - - - 0 - - - SARMCM3.DLL - -REMAP - DCM.DLL - -pCM3 - SARMCM3.DLL - - TCM.DLL - -pCM3 - - - - 1 - 0 - 0 - 0 - 16 - - - - - 1 - 0 - 0 - 1 - 1 - 4107 - - 1 - STLink\ST-LINKIII-KEIL_SWO.dll - - - - - - 0 - - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 1 - 0 - 1 - 1 - 0 - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - "Cortex-M3" - - 0 - 0 - 0 - 1 - 1 - 0 - 0 - 0 - 0 - 0 - 8 - 1 - 0 - 0 - 0 - 3 - 3 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 1 - 0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x18000 - - - 1 - 0x8000000 - 0x100000 - - - 0 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x8000000 - 0x100000 - - - 1 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x18000 - - - 0 - 0x0 - 0x0 - - - - - - 1 - 4 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 0 - 2 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - - --C99 - USE_HAL_DRIVER,STM32F103xG,USE_STM3210E_EVAL - - ../Inc;../../../../../../Drivers/CMSIS/Device/ST/STM32F1xx/Include;../../../../../../Drivers/STM32F1xx_HAL_Driver/Inc;../../../../../../Drivers/BSP/STM3210E_EVAL;../../../../../../Drivers/BSP/Components;../../../../../../Drivers/BSP/Components/Common;../../../../../../Middlewares/ST/STemWin/inc - - - - 1 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - - - - - - - - - 1 - 0 - 0 - 0 - 1 - 0 - 0x08000000 - 0x20000000 - - - - - --diag_suppress=L6329 - - - - - - - - Middlewares/STemWin/Lib - - - STemWin_CM3_wc16.a - 4 - ..\..\..\..\..\..\Middlewares\ST\STemWin\Lib\STemWin_CM3_wc16.a - - - - - Middlewares/STemWin/OS - - - GUI_X.c - 1 - ../../../../../../Middlewares/ST/STemWin/OS/GUI_X.c - - - - - Drivers/BSP/Components/spfd5408 - - - spfd5408.c - 1 - ../../../../../../Drivers/BSP/Components/spfd5408/spfd5408.c - - - - - Application/User - - - BASIC_HelloWorld.c - 1 - ../Src/BASIC_HelloWorld.c - - - main.c - 1 - ../Src/main.c - - - stm32f1xx_it.c - 1 - ../Src/stm32f1xx_it.c - - - - - Doc - - - readme.txt - 5 - ../readme.txt - - - - - Drivers/STM32F1xx_HAL_Driver - - - stm32f1xx_hal_rcc.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c - - - stm32f1xx_hal_rcc_ex.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c - - - stm32f1xx_hal_cortex.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c - - - stm32f1xx_hal.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c - - - stm32f1xx_hal_gpio.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c - - - stm32f1xx_ll_fsmc.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_fsmc.c - - - stm32f1xx_hal_dma.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c - - - stm32f1xx_hal_spi.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c - - - stm32f1xx_hal_sram.c - 1 - ../../../../../../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sram.c - - - - - Drivers/BSP/Components/ili9320 - - - ili9320.c - 1 - ../../../../../../Drivers/BSP/Components/ili9320/ili9320.c - - - - - Drivers/CMSIS - - - system_stm32f1xx.c - 1 - ../Src/system_stm32f1xx.c - - - - - Middlewares/STemWin/Config - - - LCDConf_stm32l10e_eval.c - 1 - ../Src/LCDConf_stm32l10e_eval.c - - - GUIConf_stm3210e_eval.c - 1 - ../Src/GUIConf_stm3210e_eval.c - - - - - Drivers/BSP/STM3210E_EVAL - - - stm3210e_eval.c - 1 - ../../../../../../Drivers/BSP/STM3210E_EVAL/stm3210e_eval.c - - - - - Application/MDK-ARM - - - startup_stm32f103xg.s - 2 - startup_stm32f103xg.s - - - - - Drivers/BSP/Components/hx8347d - - - hx8347d.c - 1 - ../../../../../../Drivers/BSP/Components/hx8347d/hx8347d.c - - - - - ::CMSIS - - - - - - - - - - - - - - - - - - - diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/startup_stm32f103xg.s b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/startup_stm32f103xg.s deleted file mode 100644 index 902b864..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/MDK-ARM/startup_stm32f103xg.s +++ /dev/null @@ -1,356 +0,0 @@ -;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** -;* File Name : startup_stm32f103xg.s -;* Author : MCD Application Team -;* Description : STM32F103xG Devices vector table for MDK-ARM toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == Reset_Handler -;* - Set the vector table entries with the exceptions ISR address -;* - Configure the clock system -;* - Branches to __main in the C library (which eventually -;* calls main()). -;* After Reset the Cortex-M3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;****************************************************************************** -;* @attention -;* -;* Copyright (c) 2016 STMicroelectronics. -;* All rights reserved. -;* -;* This software component is licensed by ST under BSD 3-Clause license, -;* the "License"; You may not use this file except in compliance with the -;* License. You may obtain a copy of the License at: -;* opensource.org/licenses/BSD-3-Clause -;* -;****************************************************************************** - -; Amount of memory (in bytes) allocated for Stack -; Tailor this value to your application needs -; Stack Configuration -; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> -; - -Stack_Size EQU 0x400 - - AREA STACK, NOINIT, READWRITE, ALIGN=3 -Stack_Mem SPACE Stack_Size -__initial_sp - -; Heap Configuration -; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -; - -Heap_Size EQU 0x200 - - AREA HEAP, NOINIT, READWRITE, ALIGN=3 -__heap_base -Heap_Mem SPACE Heap_Size -__heap_limit - - PRESERVE8 - THUMB - - -; Vector Table Mapped to Address 0 at Reset - AREA RESET, DATA, READONLY - EXPORT __Vectors - EXPORT __Vectors_End - EXPORT __Vectors_Size - -__Vectors DCD __initial_sp ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 & ADC2 - DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX - DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 - DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10 - DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C2 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line - DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend - DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12 - DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13 - DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14 - DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare - DCD ADC3_IRQHandler ; ADC3 - DCD FSMC_IRQHandler ; FSMC - DCD SDIO_IRQHandler ; SDIO - DCD TIM5_IRQHandler ; TIM5 - DCD SPI3_IRQHandler ; SPI3 - DCD UART4_IRQHandler ; UART4 - DCD UART5_IRQHandler ; UART5 - DCD TIM6_IRQHandler ; TIM6 - DCD TIM7_IRQHandler ; TIM7 - DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 - DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 - DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 - DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5 -__Vectors_End - -__Vectors_Size EQU __Vectors_End - __Vectors - - AREA |.text|, CODE, READONLY - -; Reset handler -Reset_Handler PROC - EXPORT Reset_Handler [WEAK] - IMPORT __main - IMPORT SystemInit - LDR R0, =SystemInit - BLX R0 - LDR R0, =__main - BX R0 - ENDP - -; Dummy Exception Handlers (infinite loops which can be modified) - -NMI_Handler PROC - EXPORT NMI_Handler [WEAK] - B . - ENDP -HardFault_Handler\ - PROC - EXPORT HardFault_Handler [WEAK] - B . - ENDP -MemManage_Handler\ - PROC - EXPORT MemManage_Handler [WEAK] - B . - ENDP -BusFault_Handler\ - PROC - EXPORT BusFault_Handler [WEAK] - B . - ENDP -UsageFault_Handler\ - PROC - EXPORT UsageFault_Handler [WEAK] - B . - ENDP -SVC_Handler PROC - EXPORT SVC_Handler [WEAK] - B . - ENDP -DebugMon_Handler\ - PROC - EXPORT DebugMon_Handler [WEAK] - B . - ENDP -PendSV_Handler PROC - EXPORT PendSV_Handler [WEAK] - B . - ENDP -SysTick_Handler PROC - EXPORT SysTick_Handler [WEAK] - B . - ENDP - -Default_Handler PROC - - EXPORT WWDG_IRQHandler [WEAK] - EXPORT PVD_IRQHandler [WEAK] - EXPORT TAMPER_IRQHandler [WEAK] - EXPORT RTC_IRQHandler [WEAK] - EXPORT FLASH_IRQHandler [WEAK] - EXPORT RCC_IRQHandler [WEAK] - EXPORT EXTI0_IRQHandler [WEAK] - EXPORT EXTI1_IRQHandler [WEAK] - EXPORT EXTI2_IRQHandler [WEAK] - EXPORT EXTI3_IRQHandler [WEAK] - EXPORT EXTI4_IRQHandler [WEAK] - EXPORT DMA1_Channel1_IRQHandler [WEAK] - EXPORT DMA1_Channel2_IRQHandler [WEAK] - EXPORT DMA1_Channel3_IRQHandler [WEAK] - EXPORT DMA1_Channel4_IRQHandler [WEAK] - EXPORT DMA1_Channel5_IRQHandler [WEAK] - EXPORT DMA1_Channel6_IRQHandler [WEAK] - EXPORT DMA1_Channel7_IRQHandler [WEAK] - EXPORT ADC1_2_IRQHandler [WEAK] - EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] - EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] - EXPORT CAN1_RX1_IRQHandler [WEAK] - EXPORT CAN1_SCE_IRQHandler [WEAK] - EXPORT EXTI9_5_IRQHandler [WEAK] - EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK] - EXPORT TIM1_UP_TIM10_IRQHandler [WEAK] - EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK] - EXPORT TIM1_CC_IRQHandler [WEAK] - EXPORT TIM2_IRQHandler [WEAK] - EXPORT TIM3_IRQHandler [WEAK] - EXPORT TIM4_IRQHandler [WEAK] - EXPORT I2C1_EV_IRQHandler [WEAK] - EXPORT I2C1_ER_IRQHandler [WEAK] - EXPORT I2C2_EV_IRQHandler [WEAK] - EXPORT I2C2_ER_IRQHandler [WEAK] - EXPORT SPI1_IRQHandler [WEAK] - EXPORT SPI2_IRQHandler [WEAK] - EXPORT USART1_IRQHandler [WEAK] - EXPORT USART2_IRQHandler [WEAK] - EXPORT USART3_IRQHandler [WEAK] - EXPORT EXTI15_10_IRQHandler [WEAK] - EXPORT RTC_Alarm_IRQHandler [WEAK] - EXPORT USBWakeUp_IRQHandler [WEAK] - EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK] - EXPORT TIM8_UP_TIM13_IRQHandler [WEAK] - EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK] - EXPORT TIM8_CC_IRQHandler [WEAK] - EXPORT ADC3_IRQHandler [WEAK] - EXPORT FSMC_IRQHandler [WEAK] - EXPORT SDIO_IRQHandler [WEAK] - EXPORT TIM5_IRQHandler [WEAK] - EXPORT SPI3_IRQHandler [WEAK] - EXPORT UART4_IRQHandler [WEAK] - EXPORT UART5_IRQHandler [WEAK] - EXPORT TIM6_IRQHandler [WEAK] - EXPORT TIM7_IRQHandler [WEAK] - EXPORT DMA2_Channel1_IRQHandler [WEAK] - EXPORT DMA2_Channel2_IRQHandler [WEAK] - EXPORT DMA2_Channel3_IRQHandler [WEAK] - EXPORT DMA2_Channel4_5_IRQHandler [WEAK] - -WWDG_IRQHandler -PVD_IRQHandler -TAMPER_IRQHandler -RTC_IRQHandler -FLASH_IRQHandler -RCC_IRQHandler -EXTI0_IRQHandler -EXTI1_IRQHandler -EXTI2_IRQHandler -EXTI3_IRQHandler -EXTI4_IRQHandler -DMA1_Channel1_IRQHandler -DMA1_Channel2_IRQHandler -DMA1_Channel3_IRQHandler -DMA1_Channel4_IRQHandler -DMA1_Channel5_IRQHandler -DMA1_Channel6_IRQHandler -DMA1_Channel7_IRQHandler -ADC1_2_IRQHandler -USB_HP_CAN1_TX_IRQHandler -USB_LP_CAN1_RX0_IRQHandler -CAN1_RX1_IRQHandler -CAN1_SCE_IRQHandler -EXTI9_5_IRQHandler -TIM1_BRK_TIM9_IRQHandler -TIM1_UP_TIM10_IRQHandler -TIM1_TRG_COM_TIM11_IRQHandler -TIM1_CC_IRQHandler -TIM2_IRQHandler -TIM3_IRQHandler -TIM4_IRQHandler -I2C1_EV_IRQHandler -I2C1_ER_IRQHandler -I2C2_EV_IRQHandler -I2C2_ER_IRQHandler -SPI1_IRQHandler -SPI2_IRQHandler -USART1_IRQHandler -USART2_IRQHandler -USART3_IRQHandler -EXTI15_10_IRQHandler -RTC_Alarm_IRQHandler -USBWakeUp_IRQHandler -TIM8_BRK_TIM12_IRQHandler -TIM8_UP_TIM13_IRQHandler -TIM8_TRG_COM_TIM14_IRQHandler -TIM8_CC_IRQHandler -ADC3_IRQHandler -FSMC_IRQHandler -SDIO_IRQHandler -TIM5_IRQHandler -SPI3_IRQHandler -UART4_IRQHandler -UART5_IRQHandler -TIM6_IRQHandler -TIM7_IRQHandler -DMA2_Channel1_IRQHandler -DMA2_Channel2_IRQHandler -DMA2_Channel3_IRQHandler -DMA2_Channel4_5_IRQHandler - B . - - ENDP - - ALIGN - -;******************************************************************************* -; User Stack and Heap initialization -;******************************************************************************* - IF :DEF:__MICROLIB - - EXPORT __initial_sp - EXPORT __heap_base - EXPORT __heap_limit - - ELSE - - IMPORT __use_two_region_memory - EXPORT __user_initial_stackheap - -__user_initial_stackheap - - LDR R0, = Heap_Mem - LDR R1, =(Stack_Mem + Stack_Size) - LDR R2, = (Heap_Mem + Heap_Size) - LDR R3, = Stack_Mem - BX LR - - ALIGN - - ENDIF - - END - -;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210E_EVAL/.cproject b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210E_EVAL/.cproject deleted file mode 100644 index f0707d7..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210E_EVAL/.cproject +++ /dev/null @@ -1,141 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210E_EVAL/.project b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210E_EVAL/.project deleted file mode 100644 index dbc04b2..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210E_EVAL/.project +++ /dev/null @@ -1,139 +0,0 @@ - - - STM3210E_EVAL - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - fr.ac6.mcu.ide.core.MCUProjectNature - - - - Doc/readme.txt - 1 - PARENT-2-PROJECT_LOC/readme.txt - - - Application/SW4STM32/startup_stm32f103xg.s - 1 - PARENT-1-PROJECT_LOC/startup_stm32f103xg.s - - - Application/User/BASIC_HelloWorld.c - 1 - PARENT-2-PROJECT_LOC/Src/BASIC_HelloWorld.c - - - Application/User/main.c - 1 - PARENT-2-PROJECT_LOC/Src/main.c - - - Application/User/stm32f1xx_it.c - 1 - PARENT-2-PROJECT_LOC/Src/stm32f1xx_it.c - - - Drivers/CMSIS/system_stm32f1xx.c - 1 - PARENT-2-PROJECT_LOC/Src/system_stm32f1xx.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_hal.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_hal_cortex.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_hal_dma.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_hal_gpio.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_hal_rcc.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_hal_rcc_ex.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_hal_spi.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_hal_sram.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sram.c - - - Drivers/STM32F1xx_HAL_Driver/stm32f1xx_ll_fsmc.c - 1 - PARENT-7-PROJECT_LOC/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_fsmc.c - - - Drivers/BSP/STM3210E_EVAL/stm3210e_eval.c - 1 - PARENT-7-PROJECT_LOC/Drivers/BSP/STM3210E_EVAL/stm3210e_eval.c - - - Middlewares/STemWin/Config/GUIConf_stm3210e_eval.c - 1 - PARENT-2-PROJECT_LOC/Src/GUIConf_stm3210e_eval.c - - - Middlewares/STemWin/Config/LCDConf_stm32l10e_eval.c - 1 - PARENT-2-PROJECT_LOC/Src/LCDConf_stm32l10e_eval.c - - - Middlewares/STemWin/OS/GUI_X.c - 1 - PARENT-7-PROJECT_LOC/Middlewares/ST/STemWin/OS/GUI_X.c - - - Drivers/BSP/Components/hx8347d/hx8347d.c - 1 - PARENT-7-PROJECT_LOC/Drivers/BSP/Components/hx8347d/hx8347d.c - - - Drivers/BSP/Components/ili9320/ili9320.c - 1 - PARENT-7-PROJECT_LOC/Drivers/BSP/Components/ili9320/ili9320.c - - - Drivers/BSP/Components/spfd5408/spfd5408.c - 1 - PARENT-7-PROJECT_LOC/Drivers/BSP/Components/spfd5408/spfd5408.c - - - diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210E_EVAL/STM32F103ZGHx_FLASH.ld b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210E_EVAL/STM32F103ZGHx_FLASH.ld deleted file mode 100644 index 5d62270..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/STM3210E_EVAL/STM32F103ZGHx_FLASH.ld +++ /dev/null @@ -1,169 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F103ZGHx Device with -** 1024KByte FLASH, 96KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20018000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/startup_stm32f103xg.s b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/startup_stm32f103xg.s deleted file mode 100644 index 92c1f1d..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/SW4STM32/startup_stm32f103xg.s +++ /dev/null @@ -1,464 +0,0 @@ -/** - *************** (C) COPYRIGHT 2017 STMicroelectronics ************************ - * @file startup_stm32f103xb.s - * @author MCD Application Team - * @brief STM32F103xB Devices vector table for Atollic toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Configure the clock system - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF1E0F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss - -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * @param None - * @retval None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -*******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_2_IRQHandler - .word USB_HP_CAN1_TX_IRQHandler - .word USB_LP_CAN1_RX0_IRQHandler - .word CAN1_RX1_IRQHandler - .word CAN1_SCE_IRQHandler - .word EXTI9_5_IRQHandler - .word TIM1_BRK_TIM9_IRQHandler - .word TIM1_UP_TIM10_IRQHandler - .word TIM1_TRG_COM_TIM11_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word TIM4_IRQHandler - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word I2C2_EV_IRQHandler - .word I2C2_ER_IRQHandler - .word SPI1_IRQHandler - .word SPI2_IRQHandler - .word USART1_IRQHandler - .word USART2_IRQHandler - .word USART3_IRQHandler - .word EXTI15_10_IRQHandler - .word RTC_Alarm_IRQHandler - .word USBWakeUp_IRQHandler - .word TIM8_BRK_TIM12_IRQHandler - .word TIM8_UP_TIM13_IRQHandler - .word TIM8_TRG_COM_TIM14_IRQHandler - .word TIM8_CC_IRQHandler - .word ADC3_IRQHandler - .word FSMC_IRQHandler - .word SDIO_IRQHandler - .word TIM5_IRQHandler - .word SPI3_IRQHandler - .word UART4_IRQHandler - .word UART5_IRQHandler - .word TIM6_IRQHandler - .word TIM7_IRQHandler - .word DMA2_Channel1_IRQHandler - .word DMA2_Channel2_IRQHandler - .word DMA2_Channel3_IRQHandler - .word DMA2_Channel4_5_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x1E0. This is for boot in RAM mode for - STM32F10x XL-Density devices. */ -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_2_IRQHandler - .thumb_set ADC1_2_IRQHandler,Default_Handler - - .weak USB_HP_CAN1_TX_IRQHandler - .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler - - .weak USB_LP_CAN1_RX0_IRQHandler - .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler - - .weak CAN1_RX1_IRQHandler - .thumb_set CAN1_RX1_IRQHandler,Default_Handler - - .weak CAN1_SCE_IRQHandler - .thumb_set CAN1_SCE_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_TIM9_IRQHandler - .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler - - .weak TIM1_UP_TIM10_IRQHandler - .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_TIM11_IRQHandler - .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTC_Alarm_IRQHandler - .thumb_set RTC_Alarm_IRQHandler,Default_Handler - - .weak USBWakeUp_IRQHandler - .thumb_set USBWakeUp_IRQHandler,Default_Handler - - .weak TIM8_BRK_TIM12_IRQHandler - .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler - - .weak TIM8_UP_TIM13_IRQHandler - .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler - - .weak TIM8_TRG_COM_TIM14_IRQHandler - .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler - - .weak TIM8_CC_IRQHandler - .thumb_set TIM8_CC_IRQHandler,Default_Handler - - .weak ADC3_IRQHandler - .thumb_set ADC3_IRQHandler,Default_Handler - - .weak FSMC_IRQHandler - .thumb_set FSMC_IRQHandler,Default_Handler - - .weak SDIO_IRQHandler - .thumb_set SDIO_IRQHandler,Default_Handler - - .weak TIM5_IRQHandler - .thumb_set TIM5_IRQHandler,Default_Handler - - .weak SPI3_IRQHandler - .thumb_set SPI3_IRQHandler,Default_Handler - - .weak UART4_IRQHandler - .thumb_set UART4_IRQHandler,Default_Handler - - .weak UART5_IRQHandler - .thumb_set UART5_IRQHandler,Default_Handler - - .weak TIM6_IRQHandler - .thumb_set TIM6_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak DMA2_Channel1_IRQHandler - .thumb_set DMA2_Channel1_IRQHandler,Default_Handler - - .weak DMA2_Channel2_IRQHandler - .thumb_set DMA2_Channel2_IRQHandler,Default_Handler - - .weak DMA2_Channel3_IRQHandler - .thumb_set DMA2_Channel3_IRQHandler,Default_Handler - - .weak DMA2_Channel4_5_IRQHandler - .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/BASIC_HelloWorld.c b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/BASIC_HelloWorld.c deleted file mode 100644 index 1b21e8a..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/BASIC_HelloWorld.c +++ /dev/null @@ -1,42 +0,0 @@ -/********************************************************************* -* SEGGER MICROCONTROLLER SYSTEME GmbH * -* Solutions for real time microcontroller applications * -********************************************************************** -* * -* (c) 1996 - 2004 SEGGER Microcontroller Systeme GmbH * -* * -* Internet: www.segger.com Support: support@segger.com * -* * -********************************************************************** - -***** emWin - Graphical user interface for embedded applications ***** -emWin is protected by international copyright laws. Knowledge of the -source code may not be used to write a similar product. This file may -only be used in accordance with a license and should not be re- -distributed in any way. We appreciate your understanding and fairness. ----------------------------------------------------------------------- -File : BASIC_HelloWorld.c -Purpose : Simple demo drawing "Hello world" ----------------------------------------------------------------------- -*/ - -#include "GUI.h" - -/********************************************************************* -* -* Public code -* -********************************************************************** -*/ -/********************************************************************* -* -* MainTask -*/ -void MainTask(void) { - GUI_Clear(); - GUI_SetFont(&GUI_Font20_1); - GUI_DispStringAt("Hello world!", (LCD_GetXSize()-100)/2, (LCD_GetYSize()-20)/2); - while(1); -} - -/*************************** End of file ****************************/ diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/GUIConf_stm3210e_eval.c b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/GUIConf_stm3210e_eval.c deleted file mode 100644 index 3d5d11d..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/GUIConf_stm3210e_eval.c +++ /dev/null @@ -1,96 +0,0 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH & Co. KG * -* Solutions for real time microcontroller applications * -********************************************************************** -* * -* (c) 1996 - 2017 SEGGER Microcontroller GmbH & Co. KG * -* * -* Internet: www.segger.com Support: support@segger.com * -* * -********************************************************************** - -** emWin V5.44 - Graphical user interface for embedded applications ** -All Intellectual Property rights in the Software belongs to SEGGER. -emWin is protected by international copyright laws. Knowledge of the -source code may not be used to write a similar product. This file may -only be used in accordance with the following terms: - -The software has been licensed to STMicroelectronics International -N.V. a Dutch company with a Swiss branch and its headquarters in Plan- -les-Ouates, Geneva, 39 Chemin du Champ des Filles, Switzerland for the -purposes of creating libraries for ARM Cortex-M-based 32-bit microcon_ -troller products commercialized by Licensee only, sublicensed and dis_ -tributed under the terms and conditions of the End User License Agree_ -ment supplied by STMicroelectronics International N.V. -Full source code is available at: www.segger.com - -We appreciate your understanding and fairness. ----------------------------------------------------------------------- -File : GUIConf.c -Purpose : Display controller initialization ----------------------------END-OF-HEADER------------------------------ -*/ - -/** - ****************************************************************************** - * @file GUIConf_stm3210e_eval.c - * @author MCD Application Team - * @brief Display controller initialization - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2018 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license SLA0044, - * the "License"; You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * http://www.st.com/SLA0044 - * - ****************************************************************************** - */ - -#include "GUI.h"/********************************************************************* -* -* Defines, configurable -* -********************************************************************** -*/ - -/* - * Define the available number of bytes available for the GUI - */ -#define GUI_NUMBYTES (1024) * 5 /*!< x KByte */ - -/********************************************************************* -* -* Static data -* -********************************************************************** -*/ - -/* 32 bit aligned memory area */ -static U32 extMem[GUI_NUMBYTES / 4]; - -/********************************************************************* -* -* Public code -* -********************************************************************** -*/ -/********************************************************************* -* -* GUI_X_Config -* -* Purpose: -* Called during the initialization process in order to set up the -* available memory for the GUI. -*/ -void GUI_X_Config(void) -{ - - GUI_ALLOC_AssignMemory(extMem, GUI_NUMBYTES); - -} - -/*************************** End of file ****************************/ diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/LCDConf_stm32l10e_eval.c b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/LCDConf_stm32l10e_eval.c deleted file mode 100644 index 3cc1aa4..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/LCDConf_stm32l10e_eval.c +++ /dev/null @@ -1,315 +0,0 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH & Co. KG * -* Solutions for real time microcontroller applications * -********************************************************************** -* * -* (c) 1996 - 2017 SEGGER Microcontroller GmbH & Co. KG * -* * -* Internet: www.segger.com Support: support@segger.com * -* * -********************************************************************** - -** emWin V5.44 - Graphical user interface for embedded applications ** -All Intellectual Property rights in the Software belongs to SEGGER. -emWin is protected by international copyright laws. Knowledge of the -source code may not be used to write a similar product. This file may -only be used in accordance with the following terms: - -The software has been licensed to STMicroelectronics International -N.V. a Dutch company with a Swiss branch and its headquarters in Plan- -les-Ouates, Geneva, 39 Chemin du Champ des Filles, Switzerland for the -purposes of creating libraries for ARM Cortex-M-based 32-bit microcon_ -troller products commercialized by Licensee only, sublicensed and dis_ -tributed under the terms and conditions of the End User License Agree_ -ment supplied by STMicroelectronics International N.V. -Full source code is available at: www.segger.com - -We appreciate your understanding and fairness. ----------------------------------------------------------------------- -File : LCDConf.c -Purpose : Display controller configuration ----------------------------END-OF-HEADER------------------------------ -*/ - -/** - ****************************************************************************** - * @file LCDConf_stm3210e_eval.c - * @author MCD Application Team - * @brief Driver for STM3210E-EVAL RevD board LCD - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2018 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license SLA0044, - * the "License"; You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * http://www.st.com/SLA0044 - * - ****************************************************************************** - */ - -#include "GUI.h" -#include "GUIDRV_FlexColor.h" -#include "main.h" -#include "hx8347d/hx8347d.h" -#include "spfd5408/spfd5408.h" -#include "ili9320/ili9320.h" - -/********************************************************************* -* -* Layer configuration (to be modified) -* -********************************************************************** -*/ - -// -// Physical display size -// -#define XSIZE_PHYS 240 -#define YSIZE_PHYS 320 - -/********************************************************************* -* -* Configuration checking -* -********************************************************************** -*/ -#ifndef VXSIZE_PHYS -#define VXSIZE_PHYS XSIZE_PHYS -#endif -#ifndef VYSIZE_PHYS -#define VYSIZE_PHYS YSIZE_PHYS -#endif -#ifndef XSIZE_PHYS -#error Physical X size of display is not defined! -#endif -#ifndef YSIZE_PHYS -#error Physical Y size of display is not defined! -#endif -#ifndef GUICC_565 -#error Color conversion not defined! -#endif -#ifndef GUIDRV_FLEXCOLOR -#error No display driver defined! -#endif - -/********************************************************************* -* -* Defines, sfrs -* -********************************************************************** -*/ -// -// COG interface register addr. -// - -typedef struct -{ - __IO uint16_t REG; - __IO uint16_t RAM; - -} LCD_CONTROLLER_TypeDef; - -/********************************************************************* -* -* Local functions -* -********************************************************************** -*/ -static void LCD_LL_Init(void); - - -/******************************************************************** -* -* LcdWriteReg -* -* Function description: -* Sets display register -*/ -static void LcdWriteReg(U16 Data) -{ - LCD_IO_WriteReg((uint8_t)Data); -} - -/******************************************************************** -* -* LcdWriteData -* -* Function description: -* Writes a value to a display register -*/ -static void LcdWriteData(U16 Data) -{ - LCD_IO_WriteMultipleData((uint8_t*)&Data, 2); -} - -/******************************************************************** -* -* LcdWriteDataMultiple -* -* Function description: -* Writes multiple values to a display register. -*/ -static void LcdWriteDataMultiple(U16 *pData, int NumItems) -{ - LCD_IO_WriteMultipleData((uint8_t *) pData, 2 * NumItems); -} - -/******************************************************************** -* -* LcdReadDataMultiple -* -* Function description: -* Reads multiple values from a display register. -*/ -static void LcdReadDataMultiple(U16 *pData, int NumItems) -{ - while (NumItems--) - { - //*pData++ = LCD_IO_ReadData(); - while (1); - } -} - -/********************************************************************* -* -* Public functions -* -********************************************************************** -*/ - -/** - * @brief Initializes the LCD. - * @param None - * @retval LCD state - */ -static void LCD_LL_Init(void) -{ - if (hx8347d_drv.ReadID() == HX8347D_ID) - { - hx8347d_Init(); - } - else if (spfd5408_drv.ReadID() == SPFD5408_ID) - { - spfd5408_Init(); - } - else if (ili9320_drv.ReadID() == ILI9320_ID) - { - ili9320_Init(); - } - else - { - hx8347d_Init(); - } -} - -/********************************************************************* -* -* LCD_X_Config -* -* Function description: -* Called during the initialization process in order to set up the -* display driver configuration. -* -*/ -void LCD_X_Config(void) -{ - GUI_DEVICE *pDevice; - CONFIG_FLEXCOLOR Config = {0}; - GUI_PORT_API PortAPI = {0}; - // - // Set display driver and color conversion - // - pDevice = GUI_DEVICE_CreateAndLink(GUIDRV_FLEXCOLOR, GUICC_565, 0, 0); - // - // Display driver configuration, required for Lin-driver - // - LCD_SetSizeEx(0, XSIZE_PHYS , YSIZE_PHYS); - LCD_SetVSizeEx(0, VXSIZE_PHYS, VYSIZE_PHYS); - // - // Orientation - // - if (hx8347d_drv.ReadID() == HX8347D_ID) - { - Config.Orientation = GUI_SWAP_XY | GUI_MIRROR_Y | GUI_MIRROR_X; - } - else if (spfd5408_drv.ReadID() == SPFD5408_ID) - { - Config.Orientation = GUI_SWAP_XY | GUI_MIRROR_Y; - } - else if (ili9320_drv.ReadID() == ILI9320_ID) - { - Config.Orientation = GUI_SWAP_XY | GUI_MIRROR_Y | GUI_MIRROR_X; - } - else - { - Config.Orientation = GUI_SWAP_XY | GUI_MIRROR_Y | GUI_MIRROR_X; - } - - GUIDRV_FlexColor_Config(pDevice, &Config); - // - // Set controller and operation mode - // - PortAPI.pfWrite16_A0 = LcdWriteReg; - PortAPI.pfWrite16_A1 = LcdWriteData; - PortAPI.pfWriteM16_A1 = LcdWriteDataMultiple; - PortAPI.pfReadM16_A1 = LcdReadDataMultiple; - - // Find the current LCD and initialize GUIDRV - if (spfd5408_drv.ReadID() == SPFD5408_ID) - { - GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66708, GUIDRV_FLEXCOLOR_M16C0B16); - } - else - { - GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66712, GUIDRV_FLEXCOLOR_M16C0B16); - } -} - -/********************************************************************* -* -* LCD_X_DisplayDriver -* -* Function description: -* This function is called by the display driver for several purposes. -* To support the according task the routine needs to be adapted to -* the display controller. Please note that the commands marked with -* 'optional' are not cogently required and should only be adapted if -* the display controller supports these features. -* -* Parameter: -* LayerIndex - Index of layer to be configured -* Cmd - Please refer to the details in the switch statement below -* pData - Pointer to a LCD_X_DATA structure -* -* Return Value: -* < -1 - Error -* -1 - Command not handled -* 0 - Ok -*/ -int LCD_X_DisplayDriver(unsigned LayerIndex, unsigned Cmd, void *pData) -{ - int r; - (void) LayerIndex; - (void) pData; - - switch (Cmd) - { - case LCD_X_INITCONTROLLER: - { - - LCD_LL_Init(); - - return 0; - } - default: - r = -1; - } - return r; -} - - -/*************************** End of file ****************************/ - diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/main.c b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/main.c deleted file mode 100644 index be9d50c..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/main.c +++ /dev/null @@ -1,183 +0,0 @@ -/** - ****************************************************************************** - * @file main.c - * @author MCD Application Team - * @brief This file provides main program functions - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" -#include "WM.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ - -/* Private function prototypes -----------------------------------------------*/ -static void BSP_Config(void); -void SystemClock_Config(void); -void BSP_Background(void); - -extern void MainTask(void); - -/* Private functions ---------------------------------------------------------*/ - -/** - * @brief Main program. - * @param None - * @retval None - */ -int main(void) -{ - /* STM32F103xG HAL library initialization: - - Configure the Flash prefetch - - Systick timer is configured by default as source of time base, but user - can eventually implement his proper time base source (a general purpose - timer for example or other time source), keeping in mind that Time base - duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and - handled in milliseconds basis. - - Set NVIC Group Priority to 4 - - Low Level Initialization - */ - HAL_Init(); - - /* Configure the system clock to 72 MHz */ - SystemClock_Config(); - - /* Initialize LEDs */ - BSP_Config(); - - /* Init the STemWin GUI Library */ - GUI_Init(); - /* Activate the use of memory device feature */ - WM_SetCreateFlags(WM_CF_MEMDEV); - - MainTask(); - - /* Infinite loop */ - for(;;); -} - -/** - * @brief Initializes the STM3210E-EVAL RevD's LCD and LEDs resources. - * @param None - * @retval None - */ -static void BSP_Config(void) -{ - /* Initialize STM3210E-EVAL RevD's LEDs */ - BSP_LED_Init(LED1); - BSP_LED_Init(LED2); - BSP_LED_Init(LED3); - BSP_LED_Init(LED4); - - /* Enable the CRC Module */ - __HAL_RCC_CRC_CLK_ENABLE(); -} - -/** -* @brief BSP_Background. -* @param None -* @retval None -*/ -void BSP_Background(void) -{ - static uint32_t LED_ticks = 0; - - if ( LED_ticks++ > 100 ) - { - LED_ticks = 0; - - /* toggle LED1..4 each 100ms */ - BSP_LED_Toggle(LED1); - BSP_LED_Toggle(LED2); - BSP_LED_Toggle(LED3); - BSP_LED_Toggle(LED4); - } - -} - - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (HSE) - * SYSCLK(Hz) = 72000000 - * HCLK(Hz) = 72000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 2 - * APB2 Prescaler = 1 - * HSE Frequency(Hz) = 8000000 - * HSE PREDIV1 = 1 - * PLLMUL = 9 - * Flash Latency(WS) = 2 - * @param None - * @retval None - */ -void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef clkinitstruct = {0}; - RCC_OscInitTypeDef oscinitstruct = {0}; - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - oscinitstruct.HSEState = RCC_HSE_ON; - oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; - oscinitstruct.PLL.PLLState = RCC_PLL_ON; - oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL9; - if (HAL_RCC_OscConfig(&oscinitstruct)!= HAL_OK) - { - /* Initialization Error */ - while(1); - } - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1; - clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2; - if (HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2)!= HAL_OK) - { - /* Initialization Error */ - while(1); - } -} - - -#ifdef USE_FULL_ASSERT -/** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ -void assert_failed(uint8_t* file, uint32_t line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} -#endif - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/stm32f1xx_it.c b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/stm32f1xx_it.c deleted file mode 100644 index 0940c80..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/stm32f1xx_it.c +++ /dev/null @@ -1,160 +0,0 @@ -/** - ****************************************************************************** - * @file STemWin\STemWin_HelloWorld\Src\stm32f1xx_it.c - * @author MCD Application Team - * @brief Main Interrupt Service Routines. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" -#include "stm32f1xx_it.h" - -#include "GUI.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -extern volatile GUI_TIMER_TIME OS_TimeMS; -extern void BSP_Background(void); - -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************/ -/* Cortex-M3 Processor Exceptions Handlers */ -/******************************************************************************/ - -/** - * @brief This function handles NMI exception. - * @param None - * @retval None - */ -void NMI_Handler(void) -{ -} - -/** - * @brief This function handles Hard Fault exception. - * @param None - * @retval None - */ -void HardFault_Handler(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Memory Manage exception. - * @param None - * @retval None - */ -void MemManage_Handler(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Bus Fault exception. - * @param None - * @retval None - */ -void BusFault_Handler(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Usage Fault exception. - * @param None - * @retval None - */ -void UsageFault_Handler(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles SVCall exception. - * @param None - * @retval None - */ -void SVC_Handler(void) -{ -} - -/** - * @brief This function handles Debug Monitor exception. - * @param None - * @retval None - */ -void DebugMon_Handler(void) -{ -} - -/** - * @brief This function handles PendSVC exception. - * @param None - * @retval None - */ -void PendSV_Handler(void) -{ -} - -/** - * @brief This function handles SysTick Handler. - * @param None - * @retval None - */ -void SysTick_Handler(void) -{ - /* Update the LocalTime by adding 1 ms each SysTick interrupt */ - HAL_IncTick(); - - OS_TimeMS++; - - BSP_Background(); -} - -/******************************************************************************/ -/* STM32F1xx Peripherals Interrupt Handlers */ -/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ -/* available peripheral interrupt handler's name please refer to the startup */ -/* file (startup_stm32f1xx.s). */ -/******************************************************************************/ - -/** - * @brief This function handles PPP interrupt request. - * @param None - * @retval None - */ -/*void PPP_IRQHandler(void) -{ -}*/ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/system_stm32f1xx.c b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/system_stm32f1xx.c deleted file mode 100644 index 4f107c8..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/Src/system_stm32f1xx.c +++ /dev/null @@ -1,428 +0,0 @@ -/** - ****************************************************************************** - * @file system_stm32f1xx.c - * @author MCD Application Team - * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. - * - * 1. This file provides two functions and one global variable to be called from - * user application: - * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier - * factors, AHB/APBx prescalers and Flash settings). - * This function is called at startup just after reset and - * before branch to main program. This call is made inside - * the "startup_stm32f1xx_xx.s" file. - * - * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used - * by the user application to setup the SysTick - * timer or configure other parameters. - * - * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must - * be called whenever the core clock is changed - * during program execution. - * - * 2. After each device reset the HSI (8 MHz) is used as system clock source. - * Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to - * configure the system clock before to branch to main program. - * - * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on - * the product used), refer to "HSE_VALUE". - * When HSE is used as system clock source, directly or through PLL, and you - * are using different crystal you have to adapt the HSE value to your own - * configuration. - * - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f1xx_system - * @{ - */ - -/** @addtogroup STM32F1xx_System_Private_Includes - * @{ - */ - -#include "stm32f1xx.h" - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_Defines - * @{ - */ - -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz. - This value can be provided and adapted by the user application. */ -#endif /* HSE_VALUE */ - -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz. - This value can be provided and adapted by the user application. */ -#endif /* HSI_VALUE */ - -/*!< Uncomment the following line if you need to use external SRAM */ -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) -/* #define DATA_IN_ExtSRAM */ -#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ - -/*!< Uncomment the following line if you need to relocate your vector Table in - Internal SRAM. */ -/* #define VECT_TAB_SRAM */ -#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. - This value must be a multiple of 0x200. */ - - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_Variables - * @{ - */ - /* This variable is updated in three ways: - 1) by calling CMSIS function SystemCoreClockUpdate() - 2) by calling HAL API function HAL_RCC_GetHCLKFreq() - 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency - Note: If you use this function to configure the system clock; then there - is no need to call the 2 first functions listed above, since SystemCoreClock - variable is updated automatically. - */ -uint32_t SystemCoreClock = 16000000; -const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; -const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4}; -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes - * @{ - */ - -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) -#ifdef DATA_IN_ExtSRAM - static void SystemInit_ExtMemCtl(void); -#endif /* DATA_IN_ExtSRAM */ -#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_Functions - * @{ - */ - -/** - * @brief Setup the microcontroller system - * Initialize the Embedded Flash Interface, the PLL and update the - * SystemCoreClock variable. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -void SystemInit (void) -{ - /* Reset the RCC clock configuration to the default reset state(for debug purpose) */ - /* Set HSION bit */ - RCC->CR |= (uint32_t)0x00000001; - - /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ -#if !defined(STM32F105xC) && !defined(STM32F107xC) - RCC->CFGR &= (uint32_t)0xF8FF0000; -#else - RCC->CFGR &= (uint32_t)0xF0FF0000; -#endif /* STM32F105xC */ - - /* Reset HSEON, CSSON and PLLON bits */ - RCC->CR &= (uint32_t)0xFEF6FFFF; - - /* Reset HSEBYP bit */ - RCC->CR &= (uint32_t)0xFFFBFFFF; - - /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ - RCC->CFGR &= (uint32_t)0xFF80FFFF; - -#if defined(STM32F105xC) || defined(STM32F107xC) - /* Reset PLL2ON and PLL3ON bits */ - RCC->CR &= (uint32_t)0xEBFFFFFF; - - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x00FF0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#elif defined(STM32F100xB) || defined(STM32F100xE) - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#else - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; -#endif /* STM32F105xC */ - -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) - #ifdef DATA_IN_ExtSRAM - SystemInit_ExtMemCtl(); - #endif /* DATA_IN_ExtSRAM */ -#endif - -#ifdef VECT_TAB_SRAM - SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ -#else - SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ -#endif -} - -/** - * @brief Update SystemCoreClock variable according to Clock Register Values. - * The SystemCoreClock variable contains the core clock (HCLK), it can - * be used by the user application to setup the SysTick timer or configure - * other parameters. - * - * @note Each time the core clock (HCLK) changes, this function must be called - * to update SystemCoreClock variable value. Otherwise, any configuration - * based on this variable will be incorrect. - * - * @note - The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * - * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) - * - * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) - * - * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) - * or HSI_VALUE(*) multiplied by the PLL factors. - * - * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value - * 8 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * - * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value - * 8 MHz or 25 MHz, depending on the product used), user has to ensure - * that HSE_VALUE is same as the real frequency of the crystal used. - * Otherwise, this function may have wrong result. - * - * - The result of this function could be not correct when using fractional - * value for HSE crystal. - * @param None - * @retval None - */ -void SystemCoreClockUpdate (void) -{ - uint32_t tmp = 0, pllmull = 0, pllsource = 0; - -#if defined(STM32F105xC) || defined(STM32F107xC) - uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; -#endif /* STM32F105xC */ - -#if defined(STM32F100xB) || defined(STM32F100xE) - uint32_t prediv1factor = 0; -#endif /* STM32F100xB or STM32F100xE */ - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & RCC_CFGR_SWS; - - switch (tmp) - { - case 0x00: /* HSI used as system clock */ - SystemCoreClock = HSI_VALUE; - break; - case 0x04: /* HSE used as system clock */ - SystemCoreClock = HSE_VALUE; - break; - case 0x08: /* PLL used as system clock */ - - /* Get PLL clock source and multiplication factor ----------------------*/ - pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; - pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; - -#if !defined(STM32F105xC) && !defined(STM32F107xC) - pllmull = ( pllmull >> 18) + 2; - - if (pllsource == 0x00) - { - /* HSI oscillator clock divided by 2 selected as PLL clock entry */ - SystemCoreClock = (HSI_VALUE >> 1) * pllmull; - } - else - { - #if defined(STM32F100xB) || defined(STM32F100xE) - prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; - /* HSE oscillator clock selected as PREDIV1 clock entry */ - SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; - #else - /* HSE selected as PLL clock entry */ - if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET) - {/* HSE oscillator clock divided by 2 */ - SystemCoreClock = (HSE_VALUE >> 1) * pllmull; - } - else - { - SystemCoreClock = HSE_VALUE * pllmull; - } - #endif - } -#else - pllmull = pllmull >> 18; - - if (pllmull != 0x0D) - { - pllmull += 2; - } - else - { /* PLL multiplication factor = PLL input clock * 6.5 */ - pllmull = 13 / 2; - } - - if (pllsource == 0x00) - { - /* HSI oscillator clock divided by 2 selected as PLL clock entry */ - SystemCoreClock = (HSI_VALUE >> 1) * pllmull; - } - else - {/* PREDIV1 selected as PLL clock entry */ - - /* Get PREDIV1 clock source and division factor */ - prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC; - prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; - - if (prediv1source == 0) - { - /* HSE oscillator clock selected as PREDIV1 clock entry */ - SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; - } - else - {/* PLL2 clock selected as PREDIV1 clock entry */ - - /* Get PREDIV2 division factor and PLL2 multiplication factor */ - prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1; - pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; - SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; - } - } -#endif /* STM32F105xC */ - break; - - default: - SystemCoreClock = HSI_VALUE; - break; - } - - /* Compute HCLK clock frequency ----------------*/ - /* Get HCLK prescaler */ - tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; - /* HCLK clock frequency */ - SystemCoreClock >>= tmp; -} - -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) -/** - * @brief Setup the external memory controller. Called in startup_stm32f1xx.s - * before jump to __main - * @param None - * @retval None - */ -#ifdef DATA_IN_ExtSRAM -/** - * @brief Setup the external memory controller. - * Called in startup_stm32f1xx_xx.s/.c before jump to main. - * This function configures the external SRAM mounted on STM3210E-EVAL - * board (STM32 High density devices). This SRAM will be used as program - * data memory (including heap and stack). - * @param None - * @retval None - */ -void SystemInit_ExtMemCtl(void) -{ - __IO uint32_t tmpreg; - /*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is - required, then adjust the Register Addresses */ - - /* Enable FSMC clock */ - RCC->AHBENR = 0x00000114; - - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN); - - /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */ - RCC->APB2ENR = 0x000001E0; - - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN); - - (void)(tmpreg); - -/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/ -/*---------------- SRAM Address lines configuration -------------------------*/ -/*---------------- NOE and NWE configuration --------------------------------*/ -/*---------------- NE3 configuration ----------------------------------------*/ -/*---------------- NBL0, NBL1 configuration ---------------------------------*/ - - GPIOD->CRL = 0x44BB44BB; - GPIOD->CRH = 0xBBBBBBBB; - - GPIOE->CRL = 0xB44444BB; - GPIOE->CRH = 0xBBBBBBBB; - - GPIOF->CRL = 0x44BBBBBB; - GPIOF->CRH = 0xBBBB4444; - - GPIOG->CRL = 0x44BBBBBB; - GPIOG->CRH = 0x44444B44; - -/*---------------- FSMC Configuration ---------------------------------------*/ -/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/ - - FSMC_Bank1->BTCR[4] = 0x00001091; - FSMC_Bank1->BTCR[5] = 0x00110212; -} -#endif /* DATA_IN_ExtSRAM */ -#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/readme.txt b/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/readme.txt deleted file mode 100644 index 0dcdf31..0000000 --- a/Projects/STM3210E_EVAL/Applications/STemWin/STemWin_HelloWorld/readme.txt +++ /dev/null @@ -1,79 +0,0 @@ -/** - @page STemWin_HelloWorld Readme file - - @verbatim - ******************** (C) COPYRIGHT 2016 STMicroelectronics ******************* - * @file STemWin_HelloWorld/readme.txt - * @author MCD Application Team - * @brief - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 - * - ****************************************************************************** - @endverbatim - - -@par Description - -Simple "Hello World" example based on STemWin. - -The example allows also to run the different Segger samples that can be -downloaded from here: -http://www.segger.com/emwin-samples.html -To do this, user has only to replace the file "Basic_HelloWorld.c" into the -project workspace by the downloaded one. - -Note that the following user files may need to be updated: - LCDConf_stm3210e_eval.c - GUIConf_stm3210e_eval.c -(if for example more GUI allocated memory is needed) - -@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds) - based on variable incremented in SysTick ISR. This implies that if HAL_Delay() is called from - a peripheral ISR process, then the SysTick interrupt must have higher priority (numerically lower) - than the peripheral interrupt. Otherwise the caller ISR process will be blocked. - To change the SysTick interrupt priority you have to use HAL_NVIC_SetPriority() function. - -@note The application need to ensure that the SysTick time base is always set to 1 millisecond - to have correct HAL operation. - -@par Directory contents - - - STemWin/STemWin_HelloWorld/Inc/GUIConf.h Header for GUIConf_stm3210e_eval.c - - STemWin/STemWin_HelloWorld/Inc/LCDConf_stm3210e_eval.h Header for LCDConf_stm3210e_eval.c - - STemWin/STemWin_HelloWorld/Inc/stm32f1xx_hal_conf.h HAL configuration file - - STemWin/STemWin_HelloWorld/Inc/stm32f1xx_it.h Interrupt handlers header file - - STemWin/STemWin_HelloWorld/Inc/main.h Header for main.c module - - STemWin/STemWin_HelloWorld/Src/stm32f1xx_it.c Interrupt handlers - - STemWin/STemWin_HelloWorld/Src/BASIC_HelloWorld.c Simple demo drawing "Hello world" - - STemWin/STemWin_HelloWorld/Src/GUIConf_stm3210e_eval.c Display controller initialization - - STemWin/STemWin_HelloWorld/Src/LCDConf_stm3210e_eval.c Configuration file for the GUI library - - STemWin/STemWin_HelloWorld/Src/main.c Main program - - STemWin/STemWin_HelloWorld/Src/system_stm32f1xx.c STM32F1xx system source file - - -@par Hardware and Software environment - - - This example runs on STM32F103xG devices. - - - This example has been tested with STM3210E-EVAL RevD board and can be - easily tailored to any other supported device and development board. - - -@par How to use it ? - -In order to make the program work, you must do the following : - - Open your preferred toolchain - - Rebuild all files and load your image into target memory - - Run the example - - *

© COPYRIGHT STMicroelectronics

- */ diff --git a/README.md b/README.md index 20c8021..6921d2f 100644 --- a/README.md +++ b/README.md @@ -13,6 +13,13 @@ The **STM32CubeF1 MCU Package** projects are directly running on the STM32F1 series boards. You can find in each Projects/*Board name* directories a set of software projects (Applications/Demonstration/Examples). +## Some middleware libraries are unavailable in this repository + +In this repository, the middleware libraries listed below **along with** the projects (demos, applications, and examples) using them, are **not available** as they (the middleware libraries) are subject to some restrictive license terms requiring the user's approval via a "click thu" procedure. +* `./Middlewares/ST/STemWin` + +If needed, they can be found inside the full firmware package available on our website `st.com` and downloadable from [here](https://www.st.com/content/st_com/en/products/embedded-software/mcu-mpu-embedded-software/stm32-embedded-software/stm32cube-mcu-mpu-packages/stm32cubef1.html#get-software). You will be prompted to login, or to register in case you have no account. + ## Release note Details about the content of this release are available in the release note [here](https://htmlpreview.github.io/?https://github.com/STMicroelectronics/STM32CubeF1/blob/master/Release_Notes.html). @@ -27,6 +34,4 @@ Details about the content of this release are available in the release note [her ## Troubleshooting -**Caution** : The issues and the pull-requests are **strictly limited** to submit problems or suggestions related to the software delivered in this repository. - -**For any other question** related to the product, the hardware performance or characteristics, the tools, the environment, you can submit it to the **ST Community** on the STM32 MCUs related [page](https://community.st.com/s/group/0F90X000000AXsASAW/stm32-mcus). +Please refer to the [CONTRIBUTING.md](CONTRIBUTING.md) guide.